Finding correct chainring NUT size
#1
Junior Member
Thread Starter
Join Date: Jul 2021
Location: NYC
Posts: 145
Bikes: Canyon Ultimate CF SL Disc, Canyon Spectral
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 24 Times
in
18 Posts
Finding correct chainring NUT size
One of the chainring nuts on my 2005 FSA G-2, 39/53 teeth crank is stripped to the point I cannot get the park chainring nut tool to properly seat on it. How can I find the proper size replacement? The nut is loose and when I stand up to pedal I hear creaking coming from the crank area.
#2
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,949
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6177 Post(s)
Liked 4,794 Times
in
3,306 Posts
Which side are you turning? I'd think the inside would be what you want held still. If you are trying to turn the slotted, then you are doing it wrong. You should be turning the outside bolt with a torx.
I might be wrong. Maybe someone else will say.
Don't know about replacements, but I'd just go to my bike shop, chat up the mechanic or owner and probably come home with a free nut from their parts bins.
I might be wrong. Maybe someone else will say.
Don't know about replacements, but I'd just go to my bike shop, chat up the mechanic or owner and probably come home with a free nut from their parts bins.
Likes For Iride01:
#3
Junior Member
Thread Starter
Join Date: Jul 2021
Location: NYC
Posts: 145
Bikes: Canyon Ultimate CF SL Disc, Canyon Spectral
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 24 Times
in
18 Posts
Which side are you turning? I'd think the inside would be what you want held still. If you are trying to turn the slotted, then you are doing it wrong. You should be turning the outside bolt with a torx.
I might be wrong. Maybe someone else will say.
Don't know about replacements, but I'd just go to my bike shop, chat up the mechanic or owner and probably come home with a free nut from their parts bins.
I might be wrong. Maybe someone else will say.
Don't know about replacements, but I'd just go to my bike shop, chat up the mechanic or owner and probably come home with a free nut from their parts bins.
#4
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,949
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6177 Post(s)
Liked 4,794 Times
in
3,306 Posts
The bolt and nut are probably somewhat crank specific in their external shape and size. So you might have to search through a bunch of them in spare parts bins of several shops. I've never had cranks with that type bolt and nut.
Is the nut turning when you try to tighten the bolt? Usually I only have to hold the nut till it starts to snug. But like I said, I don't have that particular type.
Is the nut turning when you try to tighten the bolt? Usually I only have to hold the nut till it starts to snug. But like I said, I don't have that particular type.
#5
Junior Member
Thread Starter
Join Date: Jul 2021
Location: NYC
Posts: 145
Bikes: Canyon Ultimate CF SL Disc, Canyon Spectral
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 24 Times
in
18 Posts
Yeah the nut is turn when I'm turning the torx. The slots on the nuts are stripped a bit so I can't really get it tight. And if I turn with just the torx the whole assembly spins.
#6
Full Member
https://www.ebay.com/itm/26525675784...pid=1775927467
You drill out the inside threaded piece and it falls apart. These alloy components have to be kept clean or else you end up with the problem you presently have.
You drill out the inside threaded piece and it falls apart. These alloy components have to be kept clean or else you end up with the problem you presently have.
Likes For RiceAWay:
#7
Junior Member
Thread Starter
Join Date: Jul 2021
Location: NYC
Posts: 145
Bikes: Canyon Ultimate CF SL Disc, Canyon Spectral
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Liked 24 Times
in
18 Posts
Thanks for the link.
#8
Senior Member
Join Date: Jul 2007
Posts: 7,569
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 678 Times
in
429 Posts
Fortunately, chainring bolt sizes are pretty standard. You just need to buy a set of double chainring bolts.
FSA does use torx and slotted backs. Others use 5mm/6mm hex. I prefer bolts that have a 6mm back over the slotted ones.
FSA does use torx and slotted backs. Others use 5mm/6mm hex. I prefer bolts that have a 6mm back over the slotted ones.
#9
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,641
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1939 Post(s)
Liked 1,463 Times
in
1,012 Posts
Same here. My FSA double chain ring bolt and nut set has both hex bolts and hex nuts. But all the single chain ring bolt and nut sets I have seen have the slotted nuts.