Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Restoring a 1983 Trek 720

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Restoring a 1983 Trek 720

Old 07-02-22, 01:34 PM
  #1  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Restoring a 1983 Trek 720

Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use

The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?

I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?

Thanks for any help/info. (And if this is the wrong place for this post, please let me know).

Last edited by pjw77; 07-02-22 at 01:37 PM.
pjw77 is offline  
Old 07-02-22, 02:29 PM
  #2  
ehcoplex 
Senior Member
 
Join Date: Jun 2021
Posts: 1,823

Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 1,535 Times in 745 Posts
First things first..... You need to quickly make enough posts so that you can upload photos!

The crankset determines BB spindle length (usually.....), so if you're keeping the cranks, get a BB with the same spindle length. It's possible the length is embossed on the spindle that's in there. And if you haven't dismantled the BB, maybe a cleaning and new bearings/grease are all you'll need.

If the rear hub is 126mm you should be able to fit a 7sp freewheel. But since it's got a 5sp on there, it's more likely that it's 120mm. If it's 120mm, you could fit a narrow 6sp.... Or spread the dropouts to 126mm, get a longer axle and spacers to make the old hub 126mm (you'll have to re-dish the wheel), or build up a new wheel with a 126mm hub.... Then you can use a 7sp.
ehcoplex is offline  
Likes For ehcoplex:
Old 07-02-22, 03:10 PM
  #3  
brewerkz 
Full Member
 
Join Date: May 2015
Location: Mason Ohio
Posts: 264

Bikes: '85 Schwinn Madison, '46 Higgins Ultralite, 1950s Wally Green, '85 Trek 660, '82 3Rensho Export, '90 Trek 970, '91 Schwinn Paramount, '78 Dawes, '78 Trek 730

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 71 Post(s)
Liked 236 Times in 94 Posts
some inspiration

https://cargocollective.com/BRAZENBI...ek-720-Touring
brewerkz is offline  
Old 07-02-22, 03:12 PM
  #4  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times in 1,671 Posts
My 1985 720 takes a 6 speed no problem but it came with 5.
52telecaster is offline  
Old 07-02-22, 03:17 PM
  #5  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Ha, I'd be glad to post pics when I'm able.

I've already disassembled the bottom bracket, and it was not original--what I pulled out of it was a Shimano sealed-cartridge unit, which I'm really confident was not original on this bike. And when I compare that shimano to a couple of bb spindles I have lying around, one of which came out of a late 1980s trek touring frame, the Shimano is noticeably shorter. So i'm suspicious of it.

Also, I don't know why I hadn't tried this already, but I also have a rear-wheel from a late-80s/early 90s Trek "hybrid," with a 7-speed freewheel. And the 720 frame accepts that wheel, so I guess I now know its 126mm. Still not sure I know if the Suntour Cyclone will cope with a 7-speed, though...?

Also, I've read just enough about chain length to know that with that 28-tooth granny gear on the front, I will be limited as to the biggest sprocket I can have on the back. So that makes me think 7-speed freewheels might be ruled out by that math.
pjw77 is offline  
Old 07-02-22, 03:22 PM
  #6  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Ah, that's lovely.
pjw77 is offline  
Old 07-02-22, 03:34 PM
  #7  
sd5782 
Senior Member
 
Join Date: Jan 2019
Location: Toledo Ohio
Posts: 1,501

Bikes: 1964 Huffy Sportsman, 1972 Fuji Newest, 1973 Schwinn Super Sport (3), 1982 Trek 412, 1983 Trek 700, 1989 Miyata 1000LT, 1991 Bianchi Boardwalk, plus others

Mentioned: 21 Post(s)
Tagged: 0 Thread(s)
Quoted: 577 Post(s)
Liked 686 Times in 385 Posts
The 83 Trek catalog shows a 6 speed heliocomatic 13-28 six speed rear setup which has probably been replaced although they were also made in 5 speeds. 720s are very respected here.
sd5782 is offline  
Likes For sd5782:
Old 07-02-22, 04:01 PM
  #8  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
After a little careful measuring, I think the rear dropout spacing is 120mm, not 126. (The wheel with the 7-speed freewheel did go in, but it didn't just slide right in, it needed some help.)
pjw77 is offline  
Old 07-02-22, 04:54 PM
  #9  
ehcoplex 
Senior Member
 
Join Date: Jun 2021
Posts: 1,823

Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 1,535 Times in 745 Posts
Originally Posted by pjw77
After a little careful measuring, I think the rear dropout spacing is 120mm, not 126. (The wheel with the 7-speed freewheel did go in, but it didn't just slide right in, it needed some help.)
Steel is pretty forgiving. There's plenty of debate about the stresses involved in 'shoe-horning' a 126 into a 120-spaced rear triangle..... Personally I think if it doesn't require serious muscle to get it in, it's fine. But for peace-of-mind, resetting is pretty easily done.

How large to you want to go with the biggest rear cog? IIRC a Cyclone GT (long-cage) can handle quite a bit of chain. And should be able to handle 7sp, regardless. Check Velobase or Sheldon Brown for the correct BB spindle length for the Sugino crankset.
ehcoplex is offline  
Old 07-02-22, 05:02 PM
  #10  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Originally Posted by ehcoplex

How large to you want to go with the biggest rear cog? IIRC a Cyclone GT (long-cage) can handle quite a bit of chain. And should be able to handle 7sp, regardless. Check Velobase or Sheldon Brown for the correct BB spindle length for the Sugino crankset.
I've never used a half-step plus granny setup and I want to, so I intend to keep the 28-tooth granny gear that is currently on the crankset. And I think that implies very linear (?) differences in size for the sprockets on the freewheel...?
pjw77 is offline  
Old 07-02-22, 05:16 PM
  #11  
jdawginsc 
Edumacator
 
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,429

Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...

Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 2385 Post(s)
Liked 2,931 Times in 1,862 Posts
Originally Posted by pjw77
After a little careful measuring, I think the rear dropout spacing is 120mm, not 126. (The wheel with the 7-speed freewheel did go in, but it didn't just slide right in, it needed some help.)
Firstly, I am assuming restoration means keeping the same wheels and rear dropout spacing. If you wanted to respace and get new hubs/wheels, the options open up considerably.

I think you can get an ultra 6 on there (120 spacing hub), and keep the existing hub. Might need a different wheel-set to go 7 speed, but since you are restoring, might as well find an ultra 6 (I assume the hubs are Maillard?), though finding them unworn and wider range is often tough.

Far as I know, the only Ultra 6s are the SunTour versions, Atom 77 Compact, and Regina BX-6 (I think that is the 120 mm hub version). @pastorbobnlnh will know better.

If you are not wanting to spend the $60-80 to get an Ultra 6, having 5 speeds is okay too!

Suntour Cyclone FDs are relatively easy to come by.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super












jdawginsc is offline  
Old 07-02-22, 05:37 PM
  #12  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,674

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Originally Posted by pjw77
I've never used a half-step plus granny setup and I want to, so I intend to keep the 28-tooth granny gear that is currently on the crankset. And I think that implies very linear (?) differences in size for the sprockets on the freewheel...?
You should definitely fully explore the 1/2 step+ granny and the 5 speed FW you got might be lovely. Play with one of the online gear calculators. 6 sp can work ok and forget about 7.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  
Likes For Classtime:
Old 07-02-22, 05:48 PM
  #13  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times in 1,671 Posts
You can go as low as 24 on your granny. A 14-28 five speed freewheel and 24-45-50 would cover a ton of ground. Personally my 720 wears 24-40-45 and 14-17-21-26-32 freewheel. Either way you'll be in good shape with the right length chain.
52telecaster is offline  
Likes For 52telecaster:
Old 07-02-22, 05:51 PM
  #14  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times in 1,671 Posts

Hippy camo 720.
52telecaster is offline  
Likes For 52telecaster:
Old 07-02-22, 06:23 PM
  #15  
ehcoplex 
Senior Member
 
Join Date: Jun 2021
Posts: 1,823

Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 756 Post(s)
Liked 1,535 Times in 745 Posts
I've found this online gear calculator to be great. A good way to visualize your setup (note that you can hit the 'compare' button and add a second setup to the page, and also if you want to bookmark your setup you need to click on "link to the currently selected setup'). I've got a half-step + granny on my PX-10 and really like it (first 1/2+g I've ever had). I'm building up a Holdsworth now, and trying to keep it a double up front and it's a bit of a challenge to evenly cover the range I need!

How close are you adhering to 'restoration'? Staying as original as possible, or more resto-mod? The roads where I live are so uniformly awful, and the Appalachian-steep hilliness meant if I wanted to actually ride my PX-10 it was going to have to be a resto-mod.
ehcoplex is offline  
Old 07-02-22, 06:55 PM
  #16  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Originally Posted by pjw77
After a little careful measuring, I think the rear dropout spacing is 120mm, not 126. (The wheel with the 7-speed freewheel did go in, but it didn't just slide right in, it needed some help.)
It's not 120 unless someone has messed up the spacing on the rear wheel.
bikemig is offline  
Old 07-03-22, 06:24 PM
  #17  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times in 926 Posts
Originally Posted by bikemig
It's not 120 unless someone has messed up the spacing on the rear wheel.
Exactly. I would guess an 83 is spaced at 128. I'm using a 10 speed, 130 spaced cassette hub in mine and it just slides right in.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Old 07-03-22, 06:42 PM
  #18  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
My goal is just to get this bike up-and-running, as economically as possible. I _did_ splurge on the Cyclone derailleur. But having, for instance, to build out a new rear-wheel would kill this project for me.


I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)


I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
pjw77 is offline  
Old 07-03-22, 07:51 PM
  #19  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
Originally Posted by pjw77
My goal is just to get this bike up-and-running, as economically as possible. I _did_ splurge on the Cyclone derailleur. But having, for instance, to build out a new rear-wheel would kill this project for me.


I wanted to replace the Regina freewheel because I had a heck of a time pulling it off, and I wasn't the first. The "tabs" that form the notches the removal tool fits into are chewed up; if I put it back on it might be for the last time. (And by the way, it's 13-15-18-21-24.)


I might have gotten overly ambitious, because I removed the axle and ball bearings from the rear hub (the hubs are Campagnolo) and after I was done I looked at it wondering how I'll ever get it reassembled. I have not disassembled the front hub yet, and am thinking I might not.
you do want to overhaul the hubs, bottom bracket, and headset plus replace the consumables.
bikemig is offline  
Likes For bikemig:
Old 07-03-22, 08:06 PM
  #20  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times in 926 Posts
Originally Posted by pjw77
Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use

The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?

I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?

Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
So... the Trek 720. An 83 would be first year with cantilever brakes and last year with the old school Trek styling.

The Sugino AT is one of the best, and best looking triple cranksets ever made. Check out Sheldon's database- https://www.sheldonbrown.com/bbsize.html.
I seem to remember it being 127- but there's other values in there. I've had several half step/granny crank sets but don't use them exactly in that context- but I will use the half step to find a more comfortable cruising gear- and only with 5 or 6 speed. I'm running 10 speed so my crank rings are 28-38-50. But I probably should be running a 48.

As mentioned- a 1983 Trek will not be spaced at 120- most likely 128 and you can use 126 and 130 with none of that "cold setting" nonsense- on top of it only being 2mm- it's 2mm with 47cm chainstays.

Yes you should be able to use a Cyclone GT (either first gen or MII) with 7 speed. The suntour barcons will work with that. I'd suggest getting real shift housing rather than the metal springy stuff it came with. I haven't used the old barcons with anything over 7 speed- you might have a bit of an accuracy problem at 9 and over. Again, half-step with 7 speed is dicey- someone can figure that out with a gear calculator.

Me, personally- if you're running the original DC960 brakes, I'd replace those with something cooler- XT M732, Deore MT62 or MT60 or XT MC-70- in that order.

I have a 1985 Trek 720- I've replaced most everything on it- but it's running a 10 speed triple. It's really a great great bike.

1985 Trek 720 by Dave The Golden Boy, on Flickr

85720Yard by Dave The Golden Boy, on Flickr

IMG_0616 by Dave The Golden Boy, on Flickr

IMG_2402 by Dave The Golden Boy, on Flickr

IMG_1728 by Dave The Golden Boy, on Flickr

IMG_1715 by Dave The Golden Boy, on Flickr
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Likes For The Golden Boy:
Old 07-03-22, 08:51 PM
  #21  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times in 1,671 Posts
Originally Posted by The Golden Boy
So... the Trek 720. An 83 would be first year with cantilever brakes and last year with the old school Trek styling.

The Sugino AT is one of the best, and best looking triple cranksets ever made. Check out Sheldon's database- https://www.sheldonbrown.com/bbsize.html.
I seem to remember it being 127- but there's other values in there. I've had several half step/granny crank sets but don't use them exactly in that context- but I will use the half step to find a more comfortable cruising gear- and only with 5 or 6 speed. I'm running 10 speed so my crank rings are 28-38-50. But I probably should be running a 48.

As mentioned- a 1983 Trek will not be spaced at 120- most likely 128 and you can use 126 and 130 with none of that "cold setting" nonsense- on top of it only being 2mm- it's 2mm with 47cm chainstays.

Yes you should be able to use a Cyclone GT (either first gen or MII) with 7 speed. The suntour barcons will work with that. I'd suggest getting real shift housing rather than the metal springy stuff it came with. I haven't used the old barcons with anything over 7 speed- you might have a bit of an accuracy problem at 9 and over. Again, half-step with 7 speed is dicey- someone can figure that out with a gear calculator.

Me, personally- if you're running the original DC960 brakes, I'd replace those with something cooler- XT M732, Deore MT62 or MT60 or XT MC-70- in that order.

I have a 1985 Trek 720- I've replaced most everything on it- but it's running a 10 speed triple. It's really a great great bike.

1985 Trek 720 by Dave The Golden Boy, on Flickr

85720Yard by Dave The Golden Boy, on Flickr

IMG_0616 by Dave The Golden Boy, on Flickr

IMG_2402 by Dave The Golden Boy, on Flickr

IMG_1728 by Dave The Golden Boy, on Flickr

IMG_1715 by Dave The Golden Boy, on Flickr
Beautiful 720
52telecaster is offline  
Likes For 52telecaster:
Old 07-04-22, 11:04 AM
  #22  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Thanks for all this info. Your 720 is lovely.
I had been wondering about that metal cable housing--I'd never seen it before. Lately I had been pondering how to clean it up, so I guess maybe I won't have to solve that.
pjw77 is offline  
Likes For pjw77:
Old 07-05-22, 11:30 AM
  #23  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Rear wheel / frame mismatch

It appears to me that the rear wheel I bought with the bike is for a 120mm setup, not the 128 that would be correct for this frame.
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?


Thanks for any info--


Originally Posted by pjw77
Hi folks--
I'm restoring a 1983 Trek 720. The bike was in disarray in the corner of someone's garage when I bought it. I've got it all stripped down to frame and components, cleaned everything up nicely, did a little paint touch up, and am now starting to think in detail about starting to build it back.
The current puzzle I've got is the drive train, and it's only a puzzle because I just don't know much about it.
Here's the "known" parts:
* I'm going to use a Suntour Cyclone GT rear derailleur
* the bike came with a Campagnolo front derailleur
* the bike came with a Sugino AT triple crankset, with a 50-tooth chainring, a 45-tooth, and a 28-tooth "granny". I plan to use all that.
* came with Suntour bar-con shifters, which I plan to use

The bike came with a 5-speed Regina freewheel. I'd like to replace this, but don't know what I can/should be looking for. Can I put a six-speed freewheel on? What about a seven?

I also don't know what I should be looking for in a bottom bracket. I guess the main thing to consider is total length?

Thanks for any help/info. (And if this is the wrong place for this post, please let me know).
pjw77 is offline  
Old 07-05-22, 02:40 PM
  #24  
pjw77
Newbie
Thread Starter
 
Join Date: Jul 2022
Posts: 12
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Liked 6 Times in 2 Posts
Originally Posted by pjw77
It appears to me that the rear wheel I bought with the bike is for a 120mm setup, not the 128 that would be correct for this frame.
It's been so long now that I just don't remember if the wheels where on the bike when I bought it all, or not. Would the bike be rideable if you squeezed the rear triangle to hold that smaller-than-it-wants rear wheel?


Thanks for any info--
So I guess the thing to do would be to find a replacement axle of the correct length, figure out what freewheel I want to use, and then redish the wheel to accommodate those changes?

Last edited by pjw77; 07-05-22 at 03:21 PM.
pjw77 is offline  
Old 07-06-22, 10:28 PM
  #25  
Chr0m0ly 
Senior Member
 
Chr0m0ly's Avatar
 
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,683

Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 682 Post(s)
Liked 364 Times in 218 Posts
Originally Posted by pjw77
So I guess the thing to do would be to find a replacement axle of the correct length, figure out what freewheel I want to use, and then redish the wheel to accommodate those changes?
You could also just pick up a 5 or 6 speed rear wheel with the 128 spacing that you need, they're pretty common.

I used CR18's on my '83 Trek 720 with no complaints.

https://www.treefortbikes.com/Qualit...MaAlweEALw_wcB



Chr0m0ly is offline  
Likes For Chr0m0ly:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.