The "Before And After" Thread
05-04-09, 01:43 PM
#451
Back In The Saddle
Join Date: Mar 2005
Location: Pacific Northwest
Posts: 2,318
Bikes: N+1
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
1983 Peugeot PFN10
Before:
After:
I'll take some better pictures later, once it stops raining outside.
I was able to save the bartape when I added the aero levers which is a perfect match for the paint. I also got a nice Nervar crank from the bay which replaced the stripped stock unit. I painted the seat post flutes and I think I'll do the spaces in the stem too. Added new wheels and 700x28 tires to complete the look. I was pleased the big tires fit in the frame, though they need to go in flat. Once inflated, there is plenty of room all around. Let me know what you think.
Before:
After:
I'll take some better pictures later, once it stops raining outside.
I was able to save the bartape when I added the aero levers which is a perfect match for the paint. I also got a nice Nervar crank from the bay which replaced the stripped stock unit. I painted the seat post flutes and I think I'll do the spaces in the stem too. Added new wheels and 700x28 tires to complete the look. I was pleased the big tires fit in the frame, though they need to go in flat. Once inflated, there is plenty of room all around. Let me know what you think.
__________________
In life there are no mistakes, only lessons. -Shin
In life there are no mistakes, only lessons. -Shin
Last edited by High Fist Shin; 07-03-09 at 07:51 AM.
05-07-09, 01:58 PM
#452
aka: Mike J.
Here's the oldish Raleigh Record I got a few weeks back.
When I got it it had a set of high rise handlebars and a big cushy sprung saddle.
I rummaged around at home and found a set of drop bars for it, found a spare saddle that has the Raleigh name on it salvaged off of a parts bike, wrapped on new bar tape, added new brake cables and housings, and put on an old pair of tires salvaged off of an old Schwinn junker that are in better condition than the tires the bike came with.
I'll let you figure out which are the before and which are the after pics ...
The bike is about a 55cm center to top seat tube with a 57cm top tube, standover is about 31" on 27" tires, the Huret deraileurs function just fine. If it was a keeper I'd either put on some Salmon KoolStop brake pads or switch it over to alloy wheels.
On to the next project....
When I got it it had a set of high rise handlebars and a big cushy sprung saddle.
I rummaged around at home and found a set of drop bars for it, found a spare saddle that has the Raleigh name on it salvaged off of a parts bike, wrapped on new bar tape, added new brake cables and housings, and put on an old pair of tires salvaged off of an old Schwinn junker that are in better condition than the tires the bike came with.
I'll let you figure out which are the before and which are the after pics ...
The bike is about a 55cm center to top seat tube with a 57cm top tube, standover is about 31" on 27" tires, the Huret deraileurs function just fine. If it was a keeper I'd either put on some Salmon KoolStop brake pads or switch it over to alloy wheels.
On to the next project....
05-07-09, 02:28 PM
#453
Senior Member
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,749 Times
in
937 Posts
1963 px10
Wanted one of these for a long time... Needed a white bike to sneak up on Polar Bears
05-07-09, 03:01 PM
#454
Pedal pusher...
Join Date: Oct 2006
Location: Los Angeles
Posts: 7,766
Bikes: I've got a bunch...
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 0 Times
in
0 Posts
Not mine, but I love cleaning up old bikes, and this is a perfect example of someone who shares my passion...
__________________
May you live long, live strong, and live happy!
May you live long, live strong, and live happy!
05-07-09, 03:03 PM
#455
BEHOLD! THE MANTICORE!
Join Date: Sep 2008
Location: 54914
Posts: 1,796
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Here's the oldish Raleigh Record I got a few weeks back.
When I got it it had a set of high rise handlebars and a big cushy sprung saddle.
I rummaged around at home and found a set of drop bars for it, found a spare saddle that has the Raleigh name on it salvaged off of a parts bike, wrapped on new bar tape, added new brake cables and housings, and put on an old pair of tires salvaged off of an old Schwinn junker that are in better condition than the tires the bike came with.
I'll let you figure out which are the before and which are the after pics ...
The bike is about a 55cm center to top seat tube with a 57cm top tube, standover is about 31" on 27" tires, the Huret deraileurs function just fine. If it was a keeper I'd either put on some Salmon KoolStop brake pads or switch it over to alloy wheels.
On to the next project....
When I got it it had a set of high rise handlebars and a big cushy sprung saddle.
I rummaged around at home and found a set of drop bars for it, found a spare saddle that has the Raleigh name on it salvaged off of a parts bike, wrapped on new bar tape, added new brake cables and housings, and put on an old pair of tires salvaged off of an old Schwinn junker that are in better condition than the tires the bike came with.
I'll let you figure out which are the before and which are the after pics ...
The bike is about a 55cm center to top seat tube with a 57cm top tube, standover is about 31" on 27" tires, the Huret deraileurs function just fine. If it was a keeper I'd either put on some Salmon KoolStop brake pads or switch it over to alloy wheels.
On to the next project....
lol, I just saw this on CL. I would take it if it fit
05-07-09, 06:35 PM
#456
Senior member
Join Date: Oct 2004
Location: Oakville Ontario
Posts: 8,115
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 656 Times
in
370 Posts
My 1964 Schwinn Twinn, as given to me by a friend who bought it new while attending college.
https://cid-c5aa741102f41823.skydrive...winn%20002.jpg
After
https://cid-c5aa741102f41823.skydrive...ront%20003.jpg
https://cid-c5aa741102f41823.skydrive...winn%20002.jpg
After
https://cid-c5aa741102f41823.skydrive...ront%20003.jpg
Last edited by Dan Burkhart; 01-06-15 at 09:02 PM.
05-08-09, 05:24 PM
#458
Junior Member
Join Date: Apr 2009
Location: Evansville, IN
Posts: 16
Bikes: Cannondale Synapse 4, Peugeot, Schwinn Volare, Diamondback Insight
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Before
After
Still need to replace the sew-up tires, but I wanted to post a photo anyway.
After
Still need to replace the sew-up tires, but I wanted to post a photo anyway.
05-08-09, 06:54 PM
#460
Senior Member
Join Date: Oct 2006
Location: Puyallup Washington
Posts: 1,846
Bikes: Motobecane Mirage fixed gear, Nashbar Alpha Road 5000, Bianchi Grizzly, Coppi Fiorelli, , Schwinn Trike, , GT All Terra, Old Peugeot, Nishiki 3 speed, Bugatti, Cannondale Black Lightning, Dura All, Bianchi Touring, Bridgestone T700 & more
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
That Volare is fantastic!
05-09-09, 11:40 AM
#461
one life on two wheels
Join Date: Jul 2008
Location: St. Petersburg, FL
Posts: 2,552
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 18 Times
in
15 Posts
I dunno if I've posted on here before so sory if it's a reapeat...
My 1974 Raleigh Sports:
Before:
after:
My 1974 Raleigh Sports:
Before:
after:
Likes For cobrabyte:
05-09-09, 11:51 AM
#464
Bicycle Repair Man !!!
After some minor work...
After a whole bunch of work...
After a whole bunch of work...
05-09-09, 05:13 PM
#465
Back In The Saddle
Join Date: Mar 2005
Location: Pacific Northwest
Posts: 2,318
Bikes: N+1
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
We finally had a break in the weather and I had a chance to take some detailed pictures of my Peugeot. Here we go. Again:
Before:
After:
Before:
After:
05-09-09, 08:27 PM
#467
Bicycle Repair Man !!!
Machin - That Peugeot is absolutely gorgeous.
501 tubes ?
501 tubes ?
05-10-09, 01:04 AM
#468
just going for a ride...
Join Date: Jan 2008
Location: Hillsboro, Oregon
Posts: 584
Bikes: LeMond Sarthe, OCR A1, OCR 2, Cypress DX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
05-11-09, 04:15 AM
#472
Viscount
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Now for something completely different.
Now for something completely different
Found this sad looking Gundle Carrier/Trade bike at an auction recently.
Gundle is the Rolls Royce of this type of bike here in UK.
In production from 1932 - 1974 in virtually the same form.
Before, with the carrier cradle removed for transport.
And after a repaint and service, plus a new rear tyre and brake pads.
The rims have been left as is for now to check where the brakes rub and then the rest of the rims will be painted black as per the original.
This one was probably made in the 1950s, but could be earlier since it has no chrome, it is all black!
More info about Leonard Gundle and his bikes - including motorcycles - here:
https://www.flickr.com/groups/leonard_gundle/
Found this sad looking Gundle Carrier/Trade bike at an auction recently.
Gundle is the Rolls Royce of this type of bike here in UK.
In production from 1932 - 1974 in virtually the same form.
Before, with the carrier cradle removed for transport.
And after a repaint and service, plus a new rear tyre and brake pads.
The rims have been left as is for now to check where the brakes rub and then the rest of the rims will be painted black as per the original.
This one was probably made in the 1950s, but could be earlier since it has no chrome, it is all black!
More info about Leonard Gundle and his bikes - including motorcycles - here:
https://www.flickr.com/groups/leonard_gundle/
Last edited by viscount; 05-11-09 at 04:29 AM. Reason: Omission
05-11-09, 06:14 AM
#473
Back In The Saddle
Join Date: Mar 2005
Location: Pacific Northwest
Posts: 2,318
Bikes: N+1
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 87 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
^ Fantastic!
Can you tell me where the carrier cradle support legs rest while riding? Do they swing in towards the back of the bike?
Can you tell me where the carrier cradle support legs rest while riding? Do they swing in towards the back of the bike?
05-12-09, 04:42 AM
#474
Viscount
Join Date: Jul 2007
Location: Gloucester, England.
Posts: 1,016
Bikes: Mercian, Viscount x2, Holdworth La Quelda, Gundle Trade Bike, Williams/Mercian Tourer, Itera,
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
They fold up backwards towards the rider and there should be a clip to hold it there.
It is missing above but I simply use a leather toe clip strap to provide positive location.
It is missing above but I simply use a leather toe clip strap to provide positive location.
