Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

No brifters: 1948 (or older) Humber Cob Tourist X joins the stables

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

No brifters: 1948 (or older) Humber Cob Tourist X joins the stables

Old 06-06-21, 09:00 PM
  #1  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
No brifters: 1948 (or older) Humber Cob Tourist X joins the stables

Well, not exactly yet, as it just got picked up by dmark for me (thank you!) from the seller in New Jersey. Bike is currently with him; these are his pics:





It's no newer than '48 given the shifter. I've yet to see the AW hub date (it might be unmarked based on what I saw in the seller's photos), or the date on the front hub, which I believe is the earlier GH8 8V AC Sturmey Dynohub.







I'm basing the Cob Tourist X name off the 1936 Humber catalog currently online, but it seems to check out - it's basically a 26 x 1-3/8" version of a rod brake Raleigh with bolt-on stays. It's essentially a direct equivalent to the 1936 Raleigh Dawn Tourist X. Unlike the later 1950's models, "Dawn Tourist" appears to refer to an EA3-wheeled version of the slack-angle roadster; while the X stands for rod brakes. Later on, rod brakes on a Sports frame would take on the "Dawn" moniker. Confused yet?

I paid quite a bit more than I should for this one, but decided to bite the bullet as it's in stupendous shape. The black enamel barely has a chip in it, and the pinstriping hasn't faded a bit. Someone bought this thing many years ago and parked it.





The dent in the rear fender (and the crease in the front fender at the crown) are about the only issues I have to deal with - fortunately, these can be massaged quite well with one's fingers, given due care:





If anything, the wheels are the only thing to let it down - spokes appear to be galvanized, and the rims, while nice, aren't perfect.

Interestingly, a lot of the bits are wartime blackout, but the handlebar isn't. It also doesn't have the bifurcated fork one would expect. Someone at the Nottingham factory was probably busy with some substitution funsies that day.

Looking forward to this one making its way here. More pics when that happens.

-Kurt
__________________












cudak888 is offline  
Old 06-06-21, 09:53 PM
  #2  
RustyJames 
Senior Member
 
Join Date: Mar 2021
Location: Beaverton, OR
Posts: 1,443

Bikes: You had me at rusty and Italian!!

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 559 Post(s)
Liked 1,032 Times in 534 Posts
Fabulous!! Ever since I picked my ‘65 Raleigh I’m really appreciating the British-ness of it. Simple, very durable and it rides lovely.
Cant wait to hear a more thorough evaluation of your fine machine!
RustyJames is offline  
Likes For RustyJames:
Old 06-07-21, 05:55 AM
  #3  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Kurt, what's on the non-generator side of the front hub? Some sort of disk to measure mileage?

With your fleet of "roddies" you can start a side hustle in Coral Gables: Cudak's Rod-Brake English Roadster Sight Seeing Tours. One of the included stops is the fabled Bike Share Museum (admission an extra charge).
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Likes For pastorbobnlnh:
Old 06-07-21, 06:34 AM
  #4  
clubman 
Phyllo-buster
 
clubman's Avatar
 
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,829

Bikes: roadsters, club bikes, fixed and classic

Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,028 Times in 1,244 Posts
What a beauty. The sheen on the paint is amazing, just wait until you go at it with compound. That's spent most of it's 70 years inside.
clubman is offline  
Likes For clubman:
Old 06-07-21, 11:31 AM
  #5  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by RustyJames
Fabulous!! Ever since I picked my ‘65 Raleigh I’m really appreciating the British-ness of it. Simple, very durable and it rides lovely.
Cant wait to hear a more thorough evaluation of your fine machine!
A 3-speed cable brake Raleigh is about as perfect as a city bike gets until one opens the wonderfull wide world of the Omafiets, but other than aluminum rims (always a good thing) and square taper cranks, nothing much has changed.

Originally Posted by pastorbobnlnh
Kurt, what's on the non-generator side of the front hub? Some sort of disk to measure mileage?

With your fleet of "roddies" you can start a side hustle in Coral Gables: Cudak's Rod-Brake English Roadster Sight Seeing Tours. One of the included stops is the fabled Bike Share Museum (admission an extra charge).
I'm certain it's the remains of an old analog cyclecomputer. The fleet of Raleighs is growing quite big now, and one just came in through the front door right now, making it:

- 194(8) Humber Cob Tourist X
- 1950 Raleigh Superbe (just arrived in kit form)
- 1951 Raleigh Sports ("C" Tourist homage)
- 1952 Raleigh Sports
- 1956 Raleigh Superbe Tourist (rough, in parts)
- 1979/80 Rudge (DL-1)
- 1980 Raleigh Sports (Restomod - "Stumpy")

That doesn't even include the three '70 Twenty models I have kicking about.

Originally Posted by clubman
What a beauty. The sheen on the paint is amazing, just wait until you go at it with compound. That's spent most of it's 70 years inside.
I'm waiting to be blinded by black enamel! I'll probably go really light on this to make sure none of the pinstriping gets damaged.

-Kurt
__________________












cudak888 is offline  
Likes For cudak888:
Old 06-07-21, 10:02 PM
  #6  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
P.S.: The GH8 came out in '38, and so did that shifter. The GH6 presumably replaced the GH8 in '45. I'm going to throw out an educated guess that '38-45 is a workable window of potential production for this bike.

Date codes should answer this definitively though.

-Kurt
__________________












cudak888 is offline  
Likes For cudak888:
Old 06-18-21, 01:09 PM
  #7  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Just got an update on the hub. No date, but it post-dates the "Patent Applied For" versions - this one says "Patent."

No date after the AW, which is a bit odd, given that the shifter and GH8 make this at least '38, and I've seen at least one '37 Sturmey hub marked "AW-7." Old stock hub?

__________________













Last edited by cudak888; 06-18-21 at 01:31 PM.
cudak888 is offline  
Likes For cudak888:
Old 06-18-21, 03:59 PM
  #8  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Kurt, next fall/winter, would you let me make an attempt to recover the Wright's saddle with new black leather?


I realize it might be some other type of material.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Old 06-18-21, 04:43 PM
  #9  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by pastorbobnlnh
Kurt, next fall/winter, would you let me make an attempt to recover the Wright's saddle with new black leather?

I realize it might be some other type of material.
Would rather fit it with another original saddle in better shape. I get the feeling that any re-do of the vinyl will not quite match the fairly taut look of the original.

-Kurt
__________________













Last edited by cudak888; 06-19-21 at 08:09 AM.
cudak888 is offline  
Old 06-18-21, 05:28 PM
  #10  
juvela
Senior Member
 
juvela's Avatar
 
Join Date: Feb 2013
Location: Alta California
Posts: 14,323
Mentioned: 414 Post(s)
Tagged: 1 Thread(s)
Quoted: 3780 Post(s)
Liked 3,284 Times in 2,145 Posts
-----



so where are the other two fork blades?




-----
juvela is online now  
Old 06-18-21, 05:31 PM
  #11  
dmark 
Senior Member
 
Join Date: Oct 2017
Location: NJ
Posts: 647

Bikes: 68 SS, 72 Fuji Finest, 72 PX-10, 77 Pana Pro 7000, 84 Pinnarello Treviso NR, 84 Trek 520, 88 Project KOM, 90 Trek 750, 91 Trek 930

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 184 Post(s)
Liked 203 Times in 141 Posts
Originally Posted by pastorbobnlnh
Kurt, next fall/winter, would you let me make an attempt to recover the Wright's saddle with new black leather?


I realize it might be some other type of material.
"Genuine" synthetic on there.
__________________
Last new bike 1991
dmark is offline  
Likes For dmark:
Old 06-18-21, 06:11 PM
  #12  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by juvela
-----



so where are the other two fork blades?




-----
I'll bet that it was a production line substitution to keep them coming down the line. Definitely not a replacement, seeing as the crown cap is wartime black as well.

-Kurt
__________________












cudak888 is offline  
Old 06-19-21, 06:31 AM
  #13  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Originally Posted by cudak888
Would rather fit it with another original saddle in better shape.

-Kurt
When you locate one, don't toss this one. I'd like to make an attempt.

Originally Posted by dmark
"Genuine" synthetic on there.
Figured as much, but I believe leather could make an acceptable substitute.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Old 06-19-21, 07:35 AM
  #14  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times in 926 Posts
That thing is going to look so hot with 7/8/9 speed brifters! But it won't belong here and I'll report it.


But that is really beautiful. Congratulations!
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Old 06-19-21, 09:17 PM
  #15  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by The Golden Boy
That thing is going to look so hot with 7/8/9 speed brifters! But it won't belong here and I'll report it.

But that is really beautiful. Congratulations!
Just wait until I hang that Dura-Ace 7900 from it!

Looking forward to it arriving - @dmark has been doing a phenomenal job of packing it and sending me photos to boot, and I'm indebted to him for all the effort he's putting into getting the packing puzzle sorted.

-Kurt
__________________












cudak888 is offline  
Old 06-19-21, 09:28 PM
  #16  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times in 926 Posts
Originally Posted by cudak888
Just wait until I hang that Dura-Ace 7900 from it!

-Kurt
That'll keep it C&V compliant as 7800 and 7900 are 10 speed- that belongs here- 7/8/9 speed do not.
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Likes For The Golden Boy:
Old 06-28-21, 10:06 PM
  #17  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
It has arrived! @dmark absolutely nailed it with his superb packing.

Was really tired today - I spent all of yesterday removing the bikes in the shed to replace a rotted rafter; nasty job - so I only assembled it enough so it can roll around on its two wheels.

Also, slight clarification - it's a Cob Tourist, not a Cob Tourist X, which would indicate rod operated drum brakes. This one is rim brake.



I had not polished anything for these pictures. This is literally as-bought:





I discovered - much to no surprise - that the left blade of the front fork isn't parallel with the right. Has there ever been a Raleigh made with a front fork that's not bent? Somehow, I doubt it.

Spokes are original, but galvanized (I believe). Either way, they pre-date Raleigh's stainless spokes. Rims are not pretty, but original and straight.

Incidentally, if anyone has a spare blackout rod brake shoe, I'd be interested. It's the only thing missing from the bike (other than the pump).

-Kurt
__________________












cudak888 is offline  
Likes For cudak888:
Old 06-29-21, 05:54 AM
  #18  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
I see it is living indoors for now, with its 1980 great grandnephew. Glad it arrived in good order despite the front fork (anticipated) issue.
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is offline  
Likes For pastorbobnlnh:
Old 06-29-21, 09:27 AM
  #19  
repechage
Senior Member
 
Join Date: Jun 2006
Posts: 20,320
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 3449 Post(s)
Liked 2,800 Times in 1,974 Posts
Originally Posted by cudak888
Just got an update on the hub. No date, but it post-dates the "Patent Applied For" versions - this one says "Patent."

No date after the AW, which is a bit odd, given that the shifter and GH8 make this at least '38, and I've seen at least one '37 Sturmey hub marked "AW-7." Old stock hub?

mid that an alloy hub shell?

overall a nice addition
Styling.
Not the big wheels suitable for running off curbs, over small dogs and wayward children but a worthy steed
repechage is offline  
Likes For repechage:
Old 06-29-21, 09:29 AM
  #20  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by repechage
mid that an alloy hub shell?

overall a nice addition
Styling.
Not the big wheels suitable for running off curbs, over small dogs and wayward children but a worthy steed
I believe it might be dirty rather than aluminum, but will check today.

This is my first EA3-wheeled rod braker. In comparison to the huge DL-1 and DL-5's that I'm accustomed to, it's tiny!

-Kurt
__________________












cudak888 is offline  
Old 07-01-21, 03:38 PM
  #21  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Confirmed - the AW hub is steel. Just a perfect slurry of old dust.

I found a moment between meetings to get it into the stand. Front end is now torn down and fork is ready to be dropped for straightening:









-Kurt
__________________













Last edited by cudak888; 02-24-24 at 09:13 PM.
cudak888 is offline  
Old 07-01-21, 11:14 PM
  #22  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Fork is out. Steerer tube looks as if it has never seen the light of day in 83 (?) years. Because it hasn't.



The crown has a pair of cast X-shaped plugs in it that both stiffen it and locate the steerer tube and fork blades. A far cry from the slightly downsized version of this crown used later in the 1960's.



Yep, she bent.



Notice how the front brake stirrup guides aren't straight and kinked to the left. Remember this, it'll be important in a minute.

I noticed both blades had a sort of French bend going on, with the back of the blade more or less parallel with the crown, rather than the center or the front. After eyeballing the fork crown, I decided to pull both of them forward. The end result looks better and I'd expect it of a Raleigh product.

And she's straight. Or at least, it looks that way:



Not really. Also note that it's kinked to the left.



I spent a fair amount of time checking and re-checking the blades from top to bottom to verify if either of them had been raked more or less than the other. They checked out. I also took a straightedge to the sides, which turned up nothing to suggest that either blade had lost length from getting curved or bent left or right.

The Park dropout alignment tools also verified the dropouts were parallel, but given the slotted design of these fork ends, it's not really possible to assume that one is perfectly centered in the hole when aligning them.

After checking and verifying the blades over and over, I finally decided to invoke close scrutiny of the dropout ends. Given how many factors affect where the dropouts wind up, I never assume that a fork is built with one blade a tad longer than the other until eliminating all possibilities.

...but this is a Raleigh.

Heavy-duty craftsmanship? Yes.
Excellent enamel finishes? Yes.
Precision framebuilding? Hell, no.







It's only about 1.5mm difference, but the small difference at the hub adds up to a huge difference at the rim edge. That explains why the brake stirrup receivers - which showed no evidence of ever having been repositioned or unfastened until I pulled them tonight - were angled to the left. They have probably been like that since this bike was new.

Put simply, the factory goofed and got the left fork blade lower than the right. It's minor, so someone in QC probably didn't catch it and file the thing before it went to paint.

I'm going to rectify this with some careful filing of the left dropout tomorrow. It took eighty three years to get this fixed.

-Kurt

P.S.: I never file dropouts unless I can prove without doubt that that the fork was built wrong and no other option exists.
__________________













Last edited by cudak888; 07-02-21 at 01:01 AM.
cudak888 is offline  
Likes For cudak888:
Old 07-02-21, 01:57 PM
  #23  
noglider 
aka Tom Reingold
 
noglider's Avatar
 
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,691

Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem

Mentioned: 510 Post(s)
Tagged: 0 Thread(s)
Quoted: 7287 Post(s)
Liked 2,362 Times in 1,381 Posts
73 years
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog

“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author

Please email me rather than PM'ing me. Thanks.
noglider is offline  
Likes For noglider:
Old 07-02-21, 04:23 PM
  #24  
Salubrious
Senior Member
 
Salubrious's Avatar
 
Join Date: Dec 2012
Location: St. Paul, MN
Posts: 1,592

Bikes: Too many 3-speeds, Jones Plus LWB

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 356 Post(s)
Liked 259 Times in 115 Posts
Originally Posted by cudak888





It's no newer than '48 given the shifter. I've yet to see the AW hub date (it might be unmarked based on what I saw in the seller's photos), or the date on the front hub, which I believe is the earlier GH8 8V AC Sturmey Dynohub.







I'm basing the Cob Tourist X name off the 1936 Humber catalog currently online, but it seems to check out - it's basically a 26 x 1-3/8" version of a rod brake Raleigh with bolt-on stays. It's essentially a direct equivalent to the 1936 Raleigh Dawn Tourist X. Unlike the later 1950's models, "Dawn Tourist" appears to refer to an EA3-wheeled version of the slack-angle roadster; while the X stands for rod brakes. Later on, rod brakes on a Sports frame would take on the "Dawn" moniker. Confused yet?

I paid quite a bit more than I should for this one, but decided to bite the bullet as it's in stupendous shape. The black enamel barely has a chip in it, and the pinstriping hasn't faded a bit. Someone bought this thing many years ago and parked it.
-Kurt
Originally Posted by cudak888
Just got an update on the hub. No date, but it post-dates the "Patent Applied For" versions - this one says "Patent."

No date after the AW, which is a bit odd, given that the shifter and GH8 make this at least '38, and I've seen at least one '37 Sturmey hub marked "AW-7." Old stock hub?
I suspect this bike is made up of bits some of which might be pre-war and still sitting around after production got going again- hence the blackout parts, which were common as early as the mid 1930s. If those are 26" wheels then the fenders are consistent with that. Seems to me the first of the AWs were actually prewar; the last year of the K was 1938 wasn't it? At any rate the date not stamped on the hub is one of the earliest ones. The drum brakes would seem to be why you don't have the Duplex fork.
Salubrious is offline  
Old 07-02-21, 05:06 PM
  #25  
cudak888 
www.theheadbadge.com
Thread Starter
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,496

Bikes: https://www.theheadbadge.com

Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 2401 Post(s)
Liked 4,350 Times in 2,075 Posts
Originally Posted by Salubrious
I suspect this bike is made up of bits some of which might be pre-war and still sitting around after production got going again- hence the blackout parts, which were common as early as the mid 1930s. If those are 26" wheels then the fenders are consistent with that. Seems to me the first of the AWs were actually prewar; the last year of the K was 1938 wasn't it? At any rate the date not stamped on the hub is one of the earliest ones. The drum brakes would seem to be why you don't have the Duplex fork.
That's the best theory I've heard yet, and would explain the chrome rims and bar despite everything wartime. Perhaps '45/46?

The K ended in '38, and as you summarized, the AW did come out in '36, a few years prior. Earliest ones are "PATENT APPLIED FOR," then "PATENT" (as this one is), followed by "AW-7," "AW-8" and so-on. The GH8 on this was also introduced in '38, supposedly discontinued in '41, and the GH6 we know so well came out in '45.

Do tell about the connection between the 26" wheels and the fenders. Other than the fenders being downsized versions of the 28" version, both the Westwoods and the fenders are basically the same.

I made an error when I called it a Cob Tourist X - it's a Cob Tourist. No X, no drums. Standard rod brakes. The post-war parts-bin production would also possibly explain the standard fork instead of the duplex.

Anyone else in the room open to the idea of calling it a '45 or '46?

-Kurt
__________________













Last edited by cudak888; 07-02-21 at 07:07 PM.
cudak888 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.