C&V Clunker 100 Challenge
#76
Still learning
Narhay, I'll bet you never thought this would be as difficult as hosting a Winter Olympics? I need a judge's ruling on this scenario.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
#77
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,518
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 790 Post(s)
Liked 1,761 Times
in
634 Posts
#78
Senior Member
Thread Starter
Hmm. While I appreciate your early interest and support for the challenge I will have to refer to the initial posting. Bikes should be taken at purchase value and parts on it coming off do not count as adding to your total budget. In that sense this one with the parts taken off would still amount to your $60 initial price.
Narhay, I'll bet you never thought this would be as difficult as hosting a Winter Olympics? I need a judge's ruling on this scenario.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
#79
Senior Member
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 1,398
Bikes: Trek 720, Trek 620, Trek 520, Steel Schwinns, AD Puch, Kona, Nishiki Pro, All City Disc Spacehorse, Waterford
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 101 Times
in
52 Posts
$50 in total.
Everything works - the bike has new tires, and was tuned.
I know zero about mountain bikes. city bikes, or whatever class this falls into.
I just know that if I am going to complete 100 km in the next week or two, it will not be on 23 or 25 mm tires.
https://s34.photobucket.com/user/jjam...?sort=3&page=1
Everything works - the bike has new tires, and was tuned.
I know zero about mountain bikes. city bikes, or whatever class this falls into.
I just know that if I am going to complete 100 km in the next week or two, it will not be on 23 or 25 mm tires.
https://s34.photobucket.com/user/jjam...?sort=3&page=1
Last edited by jjames1452; 02-15-14 at 02:26 PM. Reason: mistake
#80
Senior Member
Join Date: Jul 2006
Location: STP
Posts: 14,491
Mentioned: 74 Post(s)
Tagged: 0 Thread(s)
Quoted: 821 Post(s)
Liked 255 Times
in
142 Posts
I'm currently at $57 in total cash outlay.
I am building a mule btw and I have mapped an overnight ride on fire roads in the BWCA.
Let's hope for a reasonably early thaw for my sake.
I am building a mule btw and I have mapped an overnight ride on fire roads in the BWCA.
Let's hope for a reasonably early thaw for my sake.
#81
Senior Member
Thread Starter
Looking good everyone. Hopefully those with a small bicycle budget can use this thread to show just how low you can go.
#82
Bicycle Repair Man !!!
I am so on this and think I have found my dream date... Gaspipe frame, ugly lugs, cotters, steel patterned rims, stem shifters, a deraileur that can double as a sledgehammer, vinyl ass hatchet, and nary a speck of alloy anywhere.
And no, it is not even as nice as a UO8 Peugeot.
And no, it is not even as nice as a UO8 Peugeot.
#84
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Right now I'm out of town visiting bud's and other friends trying to get him drunk. So this is my tactic:
Approx. 15 years ago I built him up a vintage steel Basso, mostly Dura Ace flappers, tubies on Mavic's - Bullsye, Serrotta Ti stem, yada. Damn thing was put away wet and last ridden in 2000. Been hanging in his garage since and sadly neglected.
So there's two feet of snow on the ground and more on the way. We have a fine assortment of beers to sample. I have $56 and change in my pocket....
Approx. 15 years ago I built him up a vintage steel Basso, mostly Dura Ace flappers, tubies on Mavic's - Bullsye, Serrotta Ti stem, yada. Damn thing was put away wet and last ridden in 2000. Been hanging in his garage since and sadly neglected.
So there's two feet of snow on the ground and more on the way. We have a fine assortment of beers to sample. I have $56 and change in my pocket....
#85
KingoftheMountain wannabe
Join Date: Sep 2006
Location: Independence, Oregon
Posts: 1,152
Bikes: V.O. Pass Hunter & Specialized Hardrock
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I think you have to include the cost of beer with the bike if you get it.
#86
Bicycle Repair Man !!!
OTE=crank_addict;16499615]^^^LOL brutal.... I am so on this and think I have found my dream date. [/QUOTE]
You never bring a knife to a gunfight... there will be lots of beer money after I buy a stingy little cable lock for it.
On a brighter note I picked up a Wright's W35N (one of my favourite saddles) that was NOS and still in it's wrapper and a gorgeous but slightly used Brooks Professional for less than the cost of a case of beer... original price on the Wright's was $19.95
You never bring a knife to a gunfight... there will be lots of beer money after I buy a stingy little cable lock for it.
On a brighter note I picked up a Wright's W35N (one of my favourite saddles) that was NOS and still in it's wrapper and a gorgeous but slightly used Brooks Professional for less than the cost of a case of beer... original price on the Wright's was $19.95
#87
Bicycle Repair Man !!!
I also saw an Huffy road bike in the co-op's yard today... if it wasn't too small I would have had this thing sewn up as it is hideous.
#88
Senior Member
Thread Starter
I am so on this and think I have found my dream date... Gaspipe frame, ugly lugs, cotters, steel patterned rims, stem shifters, a deraileur that can double as a sledgehammer, vinyl ass hatchet, and nary a speck of alloy anywhere.
And no, it is not even as nice as a UO8 Peugeot.
And no, it is not even as nice as a UO8 Peugeot.
oooh. All that could make this better would be mismatched tires and rust.
#89
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
Just so you guys know you've got some worthy competition: I think my recent dumpster-sourced MTB is dead center in the spirit of this contest. It's my intention to turn this into a serviceable drop bar tourer.
For your consideration, a 1990 Redline Thirty (no, I've never heard of such a thing either)
(pls note the abstract masterpiece of rusted-in-time chainline. How does this even happen?)
Let's take a quick look inside the bottom bracket, just to make sure everything is in order there, shall we? Very good. I'd say this is up to standard.
RustyParts
Freewheel frozen stationary on the hub? Check.
Derailleur snaps into two pieces when removal is attempted? Check.
Possible areas to consider upgrading: freewheel, rear derailleur. Maybe the chain, too.
Once removed, the crankset feels a bit heavy compared to my better triples I have waiting in my parts bins. But underneath that silver-colored umm.... paint? powdercoat? ...is a functional crank that can be re-used.
Green (?) anodized rims? Was this a thing, back in 1990? Anyway, the front rim is true enough to reuse. We'll see about the back rim, if we can get the rusty axle free enough to spin.
Significant growths of moss are to be expected in my damp corner of the USA. Otherwise, one would suspect this bike has been coddled, safely tucked away in a woodshed, carport or hen house all these years
I've started cleaning it up tonight. Cash outlay so far: $0.00
For your consideration, a 1990 Redline Thirty (no, I've never heard of such a thing either)
(pls note the abstract masterpiece of rusted-in-time chainline. How does this even happen?)
Let's take a quick look inside the bottom bracket, just to make sure everything is in order there, shall we? Very good. I'd say this is up to standard.
RustyParts
Freewheel frozen stationary on the hub? Check.
Derailleur snaps into two pieces when removal is attempted? Check.
Possible areas to consider upgrading: freewheel, rear derailleur. Maybe the chain, too.
Once removed, the crankset feels a bit heavy compared to my better triples I have waiting in my parts bins. But underneath that silver-colored umm.... paint? powdercoat? ...is a functional crank that can be re-used.
Green (?) anodized rims? Was this a thing, back in 1990? Anyway, the front rim is true enough to reuse. We'll see about the back rim, if we can get the rusty axle free enough to spin.
Significant growths of moss are to be expected in my damp corner of the USA. Otherwise, one would suspect this bike has been coddled, safely tucked away in a woodshed, carport or hen house all these years
I've started cleaning it up tonight. Cash outlay so far: $0.00
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Last edited by Lascauxcaveman; 07-03-17 at 05:40 PM.
#90
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,502
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7348 Post(s)
Liked 2,465 Times
in
1,433 Posts
Great stuff, Lascauxcaveman. Make sure the stem and seatpost move before you go too far with repairs.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#91
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
Did both in a flash. I don't have high hopes for getting that freewheel off, however. We'll see if the PB Blaster can work me another miracle here.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
#92
Bicycle Repair Man !!!
I see the stakes have been raised but folks should be aware that when you put a Scotsman on a tight budget he will be in his natural element... there should be bonus points awarded for how much beer you can buy with the leftovers from the $100.00 and in my case I think I will be able to afford a good bottle of scotch.
#93
Bicycle Repair Man !!!
Narhay, I'll bet you never thought this would be as difficult as hosting a Winter Olympics? I need a judge's ruling on this scenario.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
I bought the acquisition below this Wednesday for $60, because the brakes and levers, Tektro R559 + Cane Creek SCR-5, go for $40 + $20 respectively on ebay. Those components are destined for another frame as they look terrible on that Super Le Tour. So the non-black goodies, including the frame, are incidental to the purchase. What is the assigned value to the frame, wheel set, cranks, quill and bars, minus the brakes?
BTW, I will have three builds, then decide which to ride.
#94
Still learning
#95
Senior Member
#96
Still learning
current inventory = 3 stumpys + 1 rockhopper + 2 hard rocks + 1 hard rock frame
All except the 1985 SJ Sport (shown as purchased) below were less than $65.
#97
Cisalpinist
Join Date: Jan 2011
Location: Holland
Posts: 5,557
Bikes: blue ones.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 16 Times
in
11 Posts
I second that motion. I'm firmly in single malt territory still, but will probably move on to hobo moonshine when I'm done.
#98
Bicycle Repair Man !!!
#99
Still learning
Just so you guys know you've got some worthy competition: I think my recent dumpster-sourced MTB is dead center in the spirit of this contest. It's my intention to turn this into a serviceable drop bar tourer.
For your consideration, a 1990 Redline Thirty (no, I've never heard of such a thing either)
(pls note the abstract masterpiece of rusted-in-time chainline. How does this even happen?)
Let's take a quick look inside the bottom bracket, just to make sure everything is in order there, shall we? Very good. I'd say this is up to standard.
Freewheel frozen stationary on the hub? Check.
Derailleur snaps into two pieces when removal is attempted? Check.
Possible areas to consider upgrading: freewheel, rear derailleur. Maybe the chain, too.
Once removed, the crankset feels a bit heavy compared to my better triples I have waiting in my parts bins. But underneath that silver-colored umm.... paint? powdercoat? ...is a functional crank that can be re-used.
Green (?) anodized rims? Was this a thing, back in 1990? Anyway, the front rim is true enough to reuse. We'll see about the back rim, if we can get the rusty axle free enough to spin.
Significant growths of moss are to be expected in my damp corner of the USA. Otherwise, one would suspect this bike has been coddled, safely tucked away in a woodshed, carport or hen house all these years
I've started cleaning it up tonight. Cash outlay so far: $0.00
For your consideration, a 1990 Redline Thirty (no, I've never heard of such a thing either)
(pls note the abstract masterpiece of rusted-in-time chainline. How does this even happen?)
Let's take a quick look inside the bottom bracket, just to make sure everything is in order there, shall we? Very good. I'd say this is up to standard.
Freewheel frozen stationary on the hub? Check.
Derailleur snaps into two pieces when removal is attempted? Check.
Possible areas to consider upgrading: freewheel, rear derailleur. Maybe the chain, too.
Once removed, the crankset feels a bit heavy compared to my better triples I have waiting in my parts bins. But underneath that silver-colored umm.... paint? powdercoat? ...is a functional crank that can be re-used.
Green (?) anodized rims? Was this a thing, back in 1990? Anyway, the front rim is true enough to reuse. We'll see about the back rim, if we can get the rusty axle free enough to spin.
Significant growths of moss are to be expected in my damp corner of the USA. Otherwise, one would suspect this bike has been coddled, safely tucked away in a woodshed, carport or hen house all these years
I've started cleaning it up tonight. Cash outlay so far: $0.00
#100
Still learning
That orange SJ exceeds the budget of $100, so not submitting.
But there is no theft test as part of the rules.
I don't know how Lascauxcaveman is going to bring that POS Redline in on budget as it needs everything. Did you miss the part about FMV on parts from your stash?
My first possibility is coming in under $50.
But there is no theft test as part of the rules.
I don't know how Lascauxcaveman is going to bring that POS Redline in on budget as it needs everything. Did you miss the part about FMV on parts from your stash?
My first possibility is coming in under $50.