FS: hubba hubba Campy, Milremo, Cinelli
05-14-22, 03:26 PM
#1
Full Member
Thread Starter
FS: hubba hubba Campy, Milremo, Cinelli
add postage. happy to post or send additional pix on request. all threadings Italian unless noted. *** now postpaid ***
on top:
Cinelli Bivalent set 36H freewheel needs checking. one nut is a Merz replacement in stainless. a few extra bits included. condition 7 - 8 $950
then L to R;
Campy Tipo (?) 3-piece 36H rear - EXC. front mint- no axel, cones, lock nuts or bearings $40 / pr. 2 sets available. *** both sets SOLD ***
Milremo 36H set condition 7 $40 reduced to $25 *** SOLD ***
Campy SR 32H BSC w/ skewers condition 8 $120 *** reduced to $100 ***
Campy Tipo (?) 3-piece rear w/ extra drillings OEM ? don't know. nicely done. condition 5-6 plating loss to middle section. $35 *** SOLD ***
135mm axels. fit Campy but not stamed as such. NOS $15 ea. reduced to $10 ea. *** SOLD ***
on top:
Cinelli Bivalent set 36H freewheel needs checking. one nut is a Merz replacement in stainless. a few extra bits included. condition 7 - 8 $950
then L to R;
Campy Tipo (?) 3-piece 36H rear - EXC. front mint- no axel, cones, lock nuts or bearings $40 / pr. 2 sets available. *** both sets SOLD ***
Milremo 36H set condition 7 $40 reduced to $25 *** SOLD ***
Campy SR 32H BSC w/ skewers condition 8 $120 *** reduced to $100 ***
Campy Tipo (?) 3-piece rear w/ extra drillings OEM ? don't know. nicely done. condition 5-6 plating loss to middle section. $35 *** SOLD ***
135mm axels. fit Campy but not stamed as such. NOS $15 ea. reduced to $10 ea. *** SOLD ***
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
Last edited by zephyrblau; 03-04-23 at 05:24 PM.
06-08-22, 01:24 PM
#2
Full Member
Thread Starter
bump for price reductions.
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
Last edited by zephyrblau; 11-04-22 at 01:23 PM.
11-05-22, 05:26 AM
#3
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,846
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2926 Post(s)
Liked 2,921 Times
in
1,489 Posts
add postage. happy to post or send additional pix on request. all threadings Italian unless noted. *** now postpaid ***
on top:
Cinelli Bivalent set 36H freewheel needs checking. one nut is a Merz replacement in stainless. a few extra bits included. condition 7 - 8 $950
then L to R;
Campy Tipo (?) 3-piece 36H rear - EXC. front mint- no axel, cones, lock nuts or bearings $40 / pr. 2 sets available. *** both sets SOLD ***
Milremo 36H set condition 7 $40 reduced to $25
Campy SR 32H BSC w/ skewers condition 8 $120
Campy Tipo (?) 3-piece rear w/ extra drillings OEM ? don't know. nicely done. condition 5-6 plating loss to middle section. $35 *** SOLD ***
135mm axels. fit Campy but not stamed as such. NOS $15 ea. reduced to $10 ea.
on top:
Cinelli Bivalent set 36H freewheel needs checking. one nut is a Merz replacement in stainless. a few extra bits included. condition 7 - 8 $950
then L to R;
Campy Tipo (?) 3-piece 36H rear - EXC. front mint- no axel, cones, lock nuts or bearings $40 / pr. 2 sets available. *** both sets SOLD ***
Milremo 36H set condition 7 $40 reduced to $25
Campy SR 32H BSC w/ skewers condition 8 $120
Campy Tipo (?) 3-piece rear w/ extra drillings OEM ? don't know. nicely done. condition 5-6 plating loss to middle section. $35 *** SOLD ***
135mm axels. fit Campy but not stamed as such. NOS $15 ea. reduced to $10 ea.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
01-29-23, 01:13 PM
#4
Full Member
Thread Starter
thanks for the kind words Sugar 
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
01-29-23, 07:15 PM
#5
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 841
Bikes: A few modern, Several vintage, All ridden when weather allows.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 250 Post(s)
Liked 165 Times
in
114 Posts
Email sent regarding Milremo hubs.
Cheers,
Van
Cheers,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
01-30-23, 06:29 PM
#6
Full Member
Thread Starter
pix emailed.
thanks
jerry
thanks
jerry
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
02-02-23, 04:59 PM
#7
Full Member
Thread Starter
detail pix of the Milremos.
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
02-09-23, 06:46 PM
#8
Full Member
Thread Starter
bump
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
02-09-23, 09:29 PM
#9
Newbie
Join Date: Aug 2018
Posts: 2
Bikes: Benotto Simplex 40-50's
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Cinelli Hubs
Jerry
Wondering if you might consider a lesser price?
I let my set go a (long) while ago for $200 and regret it. I have a Hetchins (Mt King) again and think it would be a nice addition. Please consider...
John Ames
Retired in
Silver Spring MD
Wondering if you might consider a lesser price?
I let my set go a (long) while ago for $200 and regret it. I have a Hetchins (Mt King) again and think it would be a nice addition. Please consider...
John Ames
Retired in
Silver Spring MD
02-10-23, 01:06 PM
#10
Full Member
Thread Starter
PM sent.
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
02-10-23, 11:07 PM
#11
Old bikes, Older guy
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 841
Bikes: A few modern, Several vintage, All ridden when weather allows.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 250 Post(s)
Liked 165 Times
in
114 Posts
Hi,
PM sent RE: Milremo hubs.
Cheers,
Van
PM sent RE: Milremo hubs.
Cheers,
Van
__________________
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
Remember: Real bikes have pedals.
...and never put a yellow tail on a Red, White and Blue kite!
02-11-23, 08:27 AM
#12
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,779
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3583 Post(s)
Liked 3,395 Times
in
1,929 Posts
Milremo was a partnership of Ron Kitching and Andre Bertin. IIRC, they contracted with others to produce the Milremo components. Re-badged Gnutti hubs, perhaps?
https://velobase.com/ViewComponent.a...m=110&AbsPos=0
https://velobase.com/ViewComponent.a...m=110&AbsPos=0
12-05-23, 09:55 PM
#13
Full Member
Thread Starter
time for a bump
__________________
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
WANTED: frame set as listed here; https://www.bikeforums.net/classic-vi...l#post18457595
