Show your French bikes!
04-06-22, 03:56 PM
#3576
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,107
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,018 Times
in
664 Posts
Nice Motobecane @Kabuki12 .. Especially in your neighborhood for under a Benjamin. But you parked the bike in front of a CNC lathe. Am I seeing that right? That is a manual feed wheel. Cool. Is this your workplace?
04-06-22, 03:58 PM
#3577
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
04-06-22, 04:02 PM
#3578
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
Do you have to deflate you rear tire to clear the fender to get the rear wheel on/off?
04-06-22, 06:16 PM
#3579
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,526
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1506 Post(s)
Liked 3,461 Times
in
1,129 Posts
I'm sorry I have no information about the builder, but I sure would like to see a couple photos of the seat stay/seat lug junction. Is there a blind binder bolt coming in from the other side?
04-06-22, 06:21 PM
#3580
Senior Member
Join Date: Jan 2016
Posts: 3,439
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 2,269 Times
in
1,272 Posts
Nice Motobecane @Kabuki12 .. Especially in your neighborhood for under a Benjamin. But you parked the bike in front of a CNC lathe. Am I seeing that right? That is a manual feed wheel. Cool. Is this your workplace?
04-06-22, 09:52 PM
#3581
Senior Member
Join Date: Jul 2014
Location: New Zealand
Posts: 1,035
Bikes: 1963? Anquetil , 1973 PX10,1979 PX10,1984 PX10, VITUS 979 PX10DU,1970S ALAN,1985 PSV10,1980s PY10FC,1978 bERTIN,ALAN carbon
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 636 Times
in
283 Posts
I am guessing it wont be too hard to spot
04-07-22, 09:30 AM
#3582
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,643
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1604 Post(s)
Liked 2,569 Times
in
1,217 Posts
04-07-22, 11:27 AM
#3583
Newbie
Likes For gesta:
04-07-22, 11:42 AM
#3584
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
Hmmmm. Do you have the fender dimpled and extending below the chain stay bridge? Or does it stop just above it? I'm trying to figure out the best way to set up the zeppelins on my PX-10. Guessing the geometry is slightly different on the PVN, but it looks pretty similar.
04-07-22, 12:06 PM
#3585
Newbie
Hmmmm. Do you have the fender dimpled and extending below the chain stay bridge? Or does it stop just above it? I'm trying to figure out the best way to set up the zeppelins on my PX-10. Guessing the geometry is slightly different on the PVN, but it looks pretty similar.
Your PX-10 looks a lot more like my ’75 PX50L than this PVN and clearance-wise, it’s not a bad thing. Originally I wanted to use 650-42b:s, but 38 is the absolute max usable width for this bike with fenders.
Likes For gesta:
04-07-22, 01:13 PM
#3586
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
Front fender is dimpled, rear is not. Rear fender extends between chainstays and thus, is connected to chainstay bridge using straight bolt. I did cut the rear fender sides to closely follow chainstay shape (using dremel-like tool) and attachment point is reinforced using large square washer, which is also radiused to follow fender’s cross-section shape.
04-07-22, 01:26 PM
#3587
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,107
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,018 Times
in
664 Posts
this is my tool grinding shop. That is a CNC tool grinder. I had two of them and we used them for making carbide tools for a while when I had employees. I sold them and I do custom tools manually , old school style. There ain’t too many of us left. Thanks for the compliment, it looked better in the photo than it really was but it turned out nice.
04-07-22, 01:53 PM
#3588
Senior Member
Join Date: Jul 2014
Location: New Zealand
Posts: 1,035
Bikes: 1963? Anquetil , 1973 PX10,1979 PX10,1984 PX10, VITUS 979 PX10DU,1970S ALAN,1985 PSV10,1980s PY10FC,1978 bERTIN,ALAN carbon
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 636 Times
in
283 Posts
04-08-22, 04:20 PM
#3589
Senior Member
Join Date: Nov 2014
Location: Saratoga calif.
Posts: 1,049
Bikes: Miyata 610(66cm), GT Vantara Hybrid (64cm), Nishiki International (64cm), Peugeot rat rod (62 cm), Trek 800 Burning Man helicopter bike, Bob Jackson frame (to be restored?) plus a never ending stream of neglected waifs from the Bike exchange.
Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 339 Post(s)
Likes: 0
Liked 631 Times
in
229 Posts
My latest build for the Silicon Valley Bicycle Exchange
1987 Peugeot Ventoux
This month’s bike is named in honor of Mt. Ventoux, an especially difficult stage of the Tour de France where contestants have to scale the peak not once but twice on the same day. While not a team bike, at just over 23 pounds and fitted with alpine gearing, it should be a great climber.
Found in the Attic at the Bike Exchange as a frame only, it was assembled with high quality running gear. A Trek chrome molly fork with forged ends was installed and Shimano 600 tri color mech. was used for the crank and derailleurs. The wheels are Mavic Open Pro’s on 105 hubs with Victorio Rubino tires. The rear cassette is an 8 speed Sun Race hyper glide with 12 – 28 tooth cogs and the chain rings have 39 and 52 teeth respectively shifted by Shimano indexed bar end shifters.
The braking is done by an Ultegra dual pivot up front and a Dia Comp 500 e at the rear. The cockpit consists of a forged stem and Specialized bars with ergo levers.
Last but not least is a nice Stella Italia leather saddle.
This bike is a real eye catcher that will appeal to the vintage lover with a sense of style.
1987 Peugeot VentouxThis month’s bike is named in honor of Mt. Ventoux, an especially difficult stage of the Tour de France where contestants have to scale the peak not once but twice on the same day. While not a team bike, at just over 23 pounds and fitted with alpine gearing, it should be a great climber.
Found in the Attic at the Bike Exchange as a frame only, it was assembled with high quality running gear. A Trek chrome molly fork with forged ends was installed and Shimano 600 tri color mech. was used for the crank and derailleurs. The wheels are Mavic Open Pro’s on 105 hubs with Victorio Rubino tires. The rear cassette is an 8 speed Sun Race hyper glide with 12 – 28 tooth cogs and the chain rings have 39 and 52 teeth respectively shifted by Shimano indexed bar end shifters.
The braking is done by an Ultegra dual pivot up front and a Dia Comp 500 e at the rear. The cockpit consists of a forged stem and Specialized bars with ergo levers.
Last but not least is a nice Stella Italia leather saddle.
This bike is a real eye catcher that will appeal to the vintage lover with a sense of style.
Likes For capnjonny:
04-09-22, 11:43 AM
#3590
Senior Member
Join Date: May 2018
Location: Ottawa, Ontario, Canada
Posts: 578
Bikes: 1951 Sun Wasp, 1953 Armstrong Consort, 1975 Raleigh Competition, 1980 Apollo Gran Sport, 1988 Schwinn Voyageur, Mystery MTB
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 457 Times
in
190 Posts
The latest incarnation of my 1975 Peugeot A0-8: Fixed gear for fun!
This is my first fixed-gear and I like the altogether different riding experience. Miche fixed hub in the back laced to a CR18, and a Normandy high-flange in the front laced to same. The crank is from a bike shop in Toronto that does a lot of single-speed and fixed-gear builds paired with a VO "fixer" bottom bracket as the threads on this frame were pooched. Saddle is an Avocet racing type found in a bin at the co-op. I sourced the handlebar on French eBay, I think it is '50s vintage - I really like the alloy stem design, plus the brake levers are the original upon which the VO city levers are based. The original rubber grips were petrified - I think that is the term. Years ago in undergrad I had a '60s U08 with upright bars and black grips and I liked that, so I sleuthed around and a pair of Hunt-Wilde grips (still made in the States!) were located. I am getting used to the one brake - jury still out on that point. Front brake is a place-holder while I figure out whether I want to find an appropriate dual-set that are more aesthetically pleasing. Tires are Continental GP5ks with a cream wall in 28mm, as I plan to eventually run some French fenders I found on eBay with lamps + sidewall dynamo for commuting. Forgot to mention the pedal straps - made by a company called YNOT in Toronto and very tough.
PXL_20220409_153815002
PXL_20220409_153841336.MP
This is my first fixed-gear and I like the altogether different riding experience. Miche fixed hub in the back laced to a CR18, and a Normandy high-flange in the front laced to same. The crank is from a bike shop in Toronto that does a lot of single-speed and fixed-gear builds paired with a VO "fixer" bottom bracket as the threads on this frame were pooched. Saddle is an Avocet racing type found in a bin at the co-op. I sourced the handlebar on French eBay, I think it is '50s vintage - I really like the alloy stem design, plus the brake levers are the original upon which the VO city levers are based. The original rubber grips were petrified - I think that is the term. Years ago in undergrad I had a '60s U08 with upright bars and black grips and I liked that, so I sleuthed around and a pair of Hunt-Wilde grips (still made in the States!) were located. I am getting used to the one brake - jury still out on that point. Front brake is a place-holder while I figure out whether I want to find an appropriate dual-set that are more aesthetically pleasing. Tires are Continental GP5ks with a cream wall in 28mm, as I plan to eventually run some French fenders I found on eBay with lamps + sidewall dynamo for commuting. Forgot to mention the pedal straps - made by a company called YNOT in Toronto and very tough.
PXL_20220409_153815002PXL_20220409_153841336.MP
Last edited by Ged117; 04-09-22 at 11:48 AM.
Likes For Ged117:
04-18-22, 12:48 PM
#3591
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
Posted my PX-10 650B conversion previously, but here she is with fenders....
04-18-22, 12:51 PM
#3592
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,863 Times
in
1,439 Posts
That's beautiful!
__________________
My Bikes
My Bikes
Likes For Andy_K:
04-18-22, 01:11 PM
#3594
Standard Member
Join Date: Apr 2009
Location: Brunswick, Maine
Posts: 4,252
Bikes: 1948 P. Barnard & Son, 1962 Rudge Sports, 1963 Freddie Grubb Routier, 1980 Manufrance Hirondelle, 1983 F. Moser Sprint, 1989 Raleigh Technium Pre, 2001 Raleigh M80
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1293 Post(s)
Liked 933 Times
in
486 Posts
04-18-22, 01:21 PM
#3595
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
Not at all! Carson City Bikes had the V-O Zeppelins on sale!
Likes For ehcoplex:
04-27-22, 12:43 AM
#3596
Senior Member
Join Date: Jul 2014
Location: New Zealand
Posts: 1,035
Bikes: 1963? Anquetil , 1973 PX10,1979 PX10,1984 PX10, VITUS 979 PX10DU,1970S ALAN,1985 PSV10,1980s PY10FC,1978 bERTIN,ALAN carbon
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 283 Post(s)
Liked 636 Times
in
283 Posts
courtois just about done . Will be an enjoyable ride once dialed in .
Likes For Hproduguidon:
04-27-22, 03:40 PM
#3598
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,242
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3802 Post(s)
Liked 3,324 Times
in
2,170 Posts
05-02-22, 02:30 AM
#3600
rmfrance
Join Date: Sep 2014
Location: SW France
Posts: 108
Bikes: 1968 Peugeot PX10, 1974 Peugeot PX10, 1964 Peugeot PX10, 1977 Peugeot PSN10, 1975 Gitane Super Olympic, 1978 Gitane Vuelta, c1958 Gitane Competition(?), 1983 Mercier?, 1981 Peugeot PF10, 1985 Peugeot PH501 Ventoux, 1965 Moulton M4 Speed
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Liked 36 Times
in
14 Posts
They were always well-specified and rated, but are comparitively little-known outside the region.
Enjoy!
