Repair Stand help
#1
Full Member
Thread Starter
Repair Stand help
I am wanting to do more of my own maintenance and repairs on my bikes. Looking for suggestions and a little guidance. I have a budget of 300.00.
BillMc
BillMc
#2
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Is that $300 just for the repair stand or is it to cover both the stand and required tools? If for the stand alone, the Park PCS 9 or PS 10 stands are very good and nicely within your budget.
Likes For HillRider:
#3
Full Member
Thread Starter
BIllMc
#4
Sr Member on Sr bikes
Do you have an Aldi grocery store near you? Check there. They’ve had them in the past (I wasn’t sure about it so I went and checked it out). I already have a Park stand, but sure enough they carried them. For less than $50 (US), they looked pretty sturdy and versatile too. Others in these forums were using them and gave good reports. Tried to search online but am seeing notes that they’re out of stock online, but are available in stores.
https://offers.kd2.org/en/us/aldi/peXXZ/
Dan
https://offers.kd2.org/en/us/aldi/peXXZ/
Dan
Last edited by _ForceD_; 08-12-22 at 08:13 AM.
#5
Definitely an amateur...
Join Date: Oct 2021
Location: B'ham, AL
Posts: 68
Bikes: Obed Baseline, Stumpy FSR
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 33 Post(s)
Liked 93 Times
in
32 Posts
I've been using a Feedback Sports Ultralight stand for a couple of years...works great. I picked mine up lightly used off ebay for @ $180 shipped.
Ultralight Bike Repair Stand | Feedback Sports
Ultralight Bike Repair Stand | Feedback Sports
Likes For kwb377:
#6
senior member
Just got this one from Park a couple months ago - have it mounted on a wooden beam in the garage - they also have a sister model that mounts to a work bench - happy with it so far .
PRS-4W-2 Deluxe Wall Mount Repair Stand | Park Tool
PRS-4W-2 Deluxe Wall Mount Repair Stand | Park Tool
#7
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
Amazon has a bunch of stands from <$100, in clouding a number of Park stands in the $200s. Park stands are pretty much the standard. Consider also what kind of stand you want - the clamp style that, if you have a carbon bike, is pretty much limited to seatpost clamping, or the type that supports the bottom bracket and clamps the fork ends
Likes For Litespud:
#8
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,984
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6191 Post(s)
Liked 4,807 Times
in
3,316 Posts
Use the money to get a power meter or something useful while riding. Just continue to hang the bike from it's saddle nose or top tube off the corner of a table. <grin>
#9
senior member
Many of our local bike shops have Park floor mounted repair stands but the guys do the nose hang anyway
#10
Senior Member
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,783
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3504 Post(s)
Liked 2,923 Times
in
1,774 Posts
Likes For smd4:
#11
Junior Member
Join Date: Jun 2019
Posts: 143
Bikes: Trek Domane SL5
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 41 Times
in
28 Posts
Do you have an Aldi grocery store near you? Check there. They’ve had them in the past (I wasn’t sure about it so I went and checked it out). I already have a Park stand, but sure enough they carried them. For less than $50 (US), they looked pretty sturdy and versatile too. Others in these forums were using them and gave good reports. Tried to search online but am seeing notes that they’re out of stock online, but are available in stores.
https://offers.kd2.org/en/us/aldi/peXXZ/
Dan
https://offers.kd2.org/en/us/aldi/peXXZ/
Dan
Likes For Fendertele:
#12
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,821 Times
in
1,540 Posts
A good repair stand is the best tool decision I have made over the years. Mine in an older park P....someting 10, it folds, is is super stable for any maintenance that you can do.
big fan of the park ones. buy once and user forever
big fan of the park ones. buy once and user forever
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#13
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,371
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2482 Post(s)
Liked 2,952 Times
in
1,677 Posts
I used the original Park repair stand in the bike stores where I worked for decades. Very nice, but I'm just as happy with my Aldi stand. In fact, I slightly prefer the clamping mechanism on the latter. I haven't seen any of those stands in any of the three Aldi locations on my bike riding routes for a few months, but Amazon likely has equivalent stands available.
Tip for using the Aldi stand and equivalent light repair stands: don't spread the stabilizer legs more than about the circumference of a road bike wheel, or a bit less. That spread is sufficiently stable for most repair jobs, and spreading the legs wider just means you'd trip over them.
By the way, of interest for those questioning the methods used by nose hang/rope from ceiling mechanics: a number of the top bike repair shops in Europe are known to use the rope hang method. They use heavy-duty jigs for building frames but apparently never saw the need for super-heavy repair stands, maybe because 50-plus-pound balloon-tire bikes never caught on there.
Tip for using the Aldi stand and equivalent light repair stands: don't spread the stabilizer legs more than about the circumference of a road bike wheel, or a bit less. That spread is sufficiently stable for most repair jobs, and spreading the legs wider just means you'd trip over them.
By the way, of interest for those questioning the methods used by nose hang/rope from ceiling mechanics: a number of the top bike repair shops in Europe are known to use the rope hang method. They use heavy-duty jigs for building frames but apparently never saw the need for super-heavy repair stands, maybe because 50-plus-pound balloon-tire bikes never caught on there.
#14
Newbie
Join Date: Jul 2017
Posts: 29
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 13 Times
in
11 Posts
I purchased this off of Amazon. It costs $83 and I am very happy with it. I haven't seen the Aldi stands in the stores by me for quite sometime. I would have purchased that if it was available. Heard good things about the stand.
https://www.amazon.com/CXWXC-Mechani.../dp/B08KLDN46C
https://www.amazon.com/CXWXC-Mechani.../dp/B08KLDN46C
#15
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
Edit: the link above is incorrect. The link above is for the cheaper stand. The PCS-4-1 is the stand with the best clamp. It’s more expensive but worth the cost.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Last edited by cyccommute; 08-17-22 at 01:05 PM.
Likes For cyccommute:
#16
Method to My Madness
Join Date: Nov 2020
Location: Orange County, California
Posts: 3,648
Bikes: Trek FX 2, Cannondale Synapse, Cannondale CAAD4, Santa Cruz Stigmata GRX
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 1,464 Times
in
1,013 Posts
I've been using a Feedback Sports Ultralight stand for a couple of years...works great. I picked mine up lightly used off ebay for @ $180 shipped.
Ultralight Bike Repair Stand | Feedback Sports
Ultralight Bike Repair Stand | Feedback Sports
The Park Tool stands have slightly better clamps, but the Feedback Sports stands are lighter and more portable.
#17
Full Member
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 353
Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 122 Post(s)
Liked 221 Times
in
140 Posts
Good on you billmc40. Having even a cheapo bike stand, and the Park stands are several cuts above that, will change the drudgery of doing bike repairs into something that is just downright fun and oh so rewarding. It will change your life (your bicycle life anyways ).
#18
Full Member
Join Date: Jun 2022
Location: San Diego, California USA
Posts: 353
Bikes: 1974 Masi GC, 1982 Trek 728 (aka 720), 1992 Trek Multitrack 750
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 122 Post(s)
Liked 221 Times
in
140 Posts
I purchased one of these from Home Depot last year. Has been more than adequate. 81 USD
https://www.homedepot.com/p/Bicycle-...1TDI/314111906
https://www.homedepot.com/p/Bicycle-...1TDI/314111906
#19
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
After a number of years I finally bought a work stand. There are a few aspects that I would consider; ease of use including clamping and stability/stoutness.
I do not have a Park stand but my impression is that it is a tough durable stand that is quite stable.
I bought a Feedback Sports stand and for me it works well. I don’t think it is a tough/stable as a Park stand, but it is light and easy to setup and clamp/unclamp. For higher torque work; i.e. bottom brackets I use a wheel on the ground to add stability.
Personally I’d stay away from cheap stands. If a stand is a pain to use, it won’t be used except when necessary.
For example, I don’t need a stand to lube a chain, but it sets up so quickly that there is little lost time and it does make it easier. And it makes it nice to do a once over on the bike without going through a production.
John
Edit added: Clamping a top tube is considered a no-no. But I do it all the time since I can lightly dial in the pressure with the clamp. If I had to remove the seatpost and use a dummy post everytime, I would prop the bike against something and not use the stand except when absolutely necessary.
I do not have a Park stand but my impression is that it is a tough durable stand that is quite stable.
I bought a Feedback Sports stand and for me it works well. I don’t think it is a tough/stable as a Park stand, but it is light and easy to setup and clamp/unclamp. For higher torque work; i.e. bottom brackets I use a wheel on the ground to add stability.
Personally I’d stay away from cheap stands. If a stand is a pain to use, it won’t be used except when necessary.
For example, I don’t need a stand to lube a chain, but it sets up so quickly that there is little lost time and it does make it easier. And it makes it nice to do a once over on the bike without going through a production.
John
Edit added: Clamping a top tube is considered a no-no. But I do it all the time since I can lightly dial in the pressure with the clamp. If I had to remove the seatpost and use a dummy post everytime, I would prop the bike against something and not use the stand except when absolutely necessary.
Last edited by 70sSanO; 08-17-22 at 08:18 AM.
#20
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
I’ve used the newer type of clamp shown in the link and can’t figure out how to make it ratchet like the old one. I usually end up unscrewing the clamp while holding the bike and there is a lot of unscrewing to do. Even more fiddly.
The Park clamp is just a lever that only needs a slight pull to fully release the bike and a slight push to securely clamp the bike.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#21
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
Edit added: Clamping a top tube is considered a no-no. But I do it all the time since I can lightly dial in the pressure with the clamp. If I had to remove the seatpost and use a dummy post everytime, I would prop the bike against something and not use the stand except when absolutely necessary.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#22
Senior Member
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,805
Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1943 Post(s)
Liked 2,164 Times
in
1,323 Posts
Clamping the top tube with the clamp pressure set too high is a no-no. The beauty of the Park clamp is that it is very adjustable. I clamp the top tube of my tandem (carefully!) because clamping a seatpost on that bike makes the stand unstable. Everything else is clamp on the seatpost, however.
I am not as familiar with the Park stands. A neighbor had one with a lever (cam) clamp and that seemed like an easy way to destroy a frame tube. He rode mtb’s and always clamped on the seatpost.
I don’t think the folding Park stands use that clamp. The reasons I got the Ultralight stand were stand weight and the speed knob (?).
John
#23
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
I purchased one of these from Home Depot last year. Has been more than adequate. 81 USD
https://www.homedepot.com/p/Bicycle-...1TDI/314111906
https://www.homedepot.com/p/Bicycle-...1TDI/314111906
#24
Senior Member
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,683
Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 645 Post(s)
Liked 797 Times
in
446 Posts
Thanks. That’s good to know.
I am not as familiar with the Park stands. A neighbor had one with a lever (cam) clamp and that seemed like an easy way to destroy a frame tube. He rode mtb’s and always clamped on the seatpost.
I don’t think the folding Park stands use that clamp. The reasons I got the Ultralight stand were stand weight and the speed knob (?).
John
I am not as familiar with the Park stands. A neighbor had one with a lever (cam) clamp and that seemed like an easy way to destroy a frame tube. He rode mtb’s and always clamped on the seatpost.
I don’t think the folding Park stands use that clamp. The reasons I got the Ultralight stand were stand weight and the speed knob (?).
John
#25
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,359
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6218 Post(s)
Liked 4,215 Times
in
2,362 Posts
Thanks. That’s good to know.
I am not as familiar with the Park stands. A neighbor had one with a lever (cam) clamp and that seemed like an easy way to destroy a frame tube. He rode mtb’s and always clamped on the seatpost.
I don’t think the folding Park stands use that clamp. The reasons I got the Ultralight stand were stand weight and the speed knob (?).
John
I am not as familiar with the Park stands. A neighbor had one with a lever (cam) clamp and that seemed like an easy way to destroy a frame tube. He rode mtb’s and always clamped on the seatpost.
I don’t think the folding Park stands use that clamp. The reasons I got the Ultralight stand were stand weight and the speed knob (?).
John
The Park cam clamp isn't ideal - mine offers three settings for three tube width ranges - fortunately two of the settings work OK for my oversize Ti tubing and my narrower steel tubing, respectively. This would be less than ideal with a CF frame, but it doesn't hurt the metal frames, apart from trashing one decal high on the seat tube
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!