More junk from my trunk
11-13-22, 10:57 AM
#1
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
More junk from my trunk
Cleaning up from the summer and this is a duplicate tool in the shop. Var tool 7 (cotter press) that should go to another C&V enthusiast. Asking $250 shipped to lower 48. It has been powder coated to protect the finish and has been cleaned and lubricated. PM me, fist to reply is first in line. Smiles, MH Pics:
tool number on handle
complete tool
This item has been claimed12-08-22
tool number on handle
complete tool
This item has been claimed12-08-22
Last edited by Mad Honk; 12-08-22 at 04:39 PM.
Likes For Mad Honk:
12-01-22, 10:58 PM
#2
Senior Member
Join Date: Oct 2020
Location: Phoenix, AZ
Posts: 906
Bikes: 1964(?) Frejus Tour de France, 1967(?) Dawes Double Blue, 1979 Trek 710, 1982 Claud Butler Dalesman, 1983 Schwinn Paramount Elite, 2014 Brompton, maybe a couple more
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 310 Post(s)
Liked 677 Times
in
329 Posts
The 600 bits seem like a deal, but too new for me. I am not sure you are getting full exposure by adding things that are not listed in the thread title, but I will keep watching in case you list something I want.
12-04-22, 01:04 PM
#3
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Today while cleaning the bottom drawer of the tool box I found this hub and rings. Sachs Maillard 36 hole flip flop hub, with matching fixed track ring and ACC freehub. Has the correct track lock-ring attached. $50 shipped to lower48. Smiles, MH
This one has been in the toolbox drawer for probably the last 35 years, and I don't think I'll be using it.
This one has been in the toolbox drawer for probably the last 35 years, and I don't think I'll be using it.
12-07-22, 10:37 AM
#4
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
A bit more cleaning yielded this pair of hubs. Flage Piccole 24 hole hubs from Italy (at this point are they very rare?) road model. I doubt at 200 lbs. I will be riding them. They are new, but not in the correct box so we won't be able to have 200 posts on whether to open the box or leave it closed. I am thinking they are worth about $210 because Flea Bay prices are over the moon (think $600 plus) .
Also a pair of brake calipers I picked up for a project bike last year and never used them. Asking $75 shipped. Pics:
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
Also a pair of brake calipers I picked up for a project bike last year and never used them. Asking $75 shipped. Pics:
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
12-07-22, 11:17 AM
#5
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,795
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2436 Post(s)
Liked 3,119 Times
in
1,962 Posts
A bit more cleaning yielded this pair of hubs. Flage Piccole 24 hole hubs from Italy (at this point are they very rare?) road model. I doubt at 200 lbs. I will be riding them. They are new, but not in the correct box so we won't be able to have 200 posts on whether to open the box or leave it closed. I am thinking they are worth about $210 because Flea Bay prices are over the moon (think $600 plus) .
Also a pair of brake calipers I picked up for a project bike last year and never used them. Asking $75 shipped. Pics:
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
Also a pair of brake calipers I picked up for a project bike last year and never used them. Asking $75 shipped. Pics:
Hubs and box as found in the trunk. Some of the glue for the box has disappeared and it is not in the best of shape.
A close look at the hubs. Rear still in original wrapper and matching front out of wrapper. Newer style QR mechanisms. Spaced for 5 speed FW.
This set of NIB calipers, Shimano BR-R451. Front and rear models shipping will take a larger Flat rate box.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
12-07-22, 12:49 PM
#7
I don't know.
Join Date: May 2003
Location: South Meriden, CT
Posts: 2,011
Bikes: '90 B'stone RB-1, '92 B'stone RB-2, '89 SuperGo Access Comp, '03 Access 69er, '23 Trek 520, '14 Ritchey Road Logic, '09 Kestrel Evoke, '08 Windsor Tourist, '17 Surly Wednesday, '89 Centurion Accordo, '15 CruX, '17 Ridley X-Night, '89 Marinoni
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 316 Post(s)
Liked 852 Times
in
445 Posts
sending a PM for the three Shimano 600 bits.
12-07-22, 01:35 PM
#8
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Alex,
A quick check with the caliper shows 126mm. They came from the Schwinn shop on East Tenth street when Tully Shaw owned it. It was likely before your time in Bloomington, but it was at the corner of Tenth and the Bypass right next to the Shushi Bar. The Sushi Bar property is currently being sold and IU will probably end up with the piece. They will then own every corner of the bypass properties. More junk from my trunk to come...
A quick check with the caliper shows 126mm. They came from the Schwinn shop on East Tenth street when Tully Shaw owned it. It was likely before your time in Bloomington, but it was at the corner of Tenth and the Bypass right next to the Shushi Bar. The Sushi Bar property is currently being sold and IU will probably end up with the piece. They will then own every corner of the bypass properties. More junk from my trunk to come...
Last edited by Mad Honk; 12-07-22 at 01:42 PM.
12-11-22, 12:25 PM
#9
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Today I un-earthed two (new old stock) Campy high flange rear hubs. 28 hole spaced for 5 speed, complete with matching skewers. Both available, asking $100each shipped to lower 48. Possible discount if you want both. I got them as part of a deal from WCC when they closed the Chicago warehouse in1986. Smiles, MH
NOS complete hub
NOS complete hub
12-15-22, 02:57 PM
#10
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Trying to find the top of my workbench is like going to and archaeologic dig site! Todays find is a pair of Low Flange Campy hubs. 36 hole, 127mm rear over-nut dimension. Asking $125 shipped to lower 48. PM me, Smiles, MH
Newer style skewers. Looks like English FW threads.
Newer style skewers. Looks like English FW threads.
12-22-22, 07:44 AM
#11
Keener splendor
If that's junk, I'd like to see the rest of your trunk, and the unskunked, defunked hunk that you think is a slam dunk.
12-22-22, 10:22 AM
#12
Senior Member
Thread Starter
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,945
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 116 Post(s)
Tagged: 0 Thread(s)
Quoted: 1303 Post(s)
Liked 1,908 Times
in
1,139 Posts
Likes For Mad Honk:
12-22-22, 10:35 AM
#13
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,526
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1506 Post(s)
Liked 3,469 Times
in
1,131 Posts
@Mad Honk
Dear Professor, you're going to overload the Wayback Machine if you keep bringing back treasure troves like that!
Sherman
Dear Professor, you're going to overload the Wayback Machine if you keep bringing back treasure troves like that!
Sherman
Likes For obrentharris:
