Lights for Shimano Steps
#1
Newbie
Thread Starter
Join Date: Jul 2013
Location: Stavanger, Norway
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
Lights for Shimano Steps
I'm trying to find a light for my e-bike that has a Shimano 5000 motor on it. I have a free port on my terminal underneath the head unit, would be neat to just plug it in there in stead of hard wiring, and trying to get a cable trough the frame down to the motor. The only light I've found which does that is Lupine, but for a cheaper commuter bike that is way beyond what I wanna spend on the convenience of not having to charge my front light. Is there any clever solutions?
Edit: And if I do find out that I wanna wire through the frame and down to the crank and motor, anything I need to connect front and rear lights?
Edit: And if I do find out that I wanna wire through the frame and down to the crank and motor, anything I need to connect front and rear lights?
Last edited by Vingleik Vaagal; 08-08-22 at 10:20 AM.
Likes For Vingleik Vaagal:
#2
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,394
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,695 Times
in
2,517 Posts
I don't know about the 5000, but the 6100 has lights as an option
Likes For unterhausen:
#3
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,505
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4348 Post(s)
Liked 3,985 Times
in
2,661 Posts
You might have to solder in a connection but Supernova or Busch and Müller would be my top choices. A commuter bike without lights is really not a commuter bike and while the parts on it might be cheap lights should not as they are an important safety feature and have good lights with a good beam pattern is quite important and worth spending money on. The new Trelock lights also look nice but haven't had a chance to test them out but again it comes down to a good beam pattern and some decent brightness but brightness should be second to beam pattern. Plus if you do have a really good set of lights you can move them to a new bike when you upgrade and just solder in new connections as needed.
Likes For veganbikes:
#4
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,262
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 881 Post(s)
Liked 820 Times
in
620 Posts
For my wife and me, (but probably in the minority), there are many great self-contained light systems (we use Lezyne). We ride only off road at night and these have an excellent pattern. For whatever reason, charging them separately isn't a problem (well, that and we ride MTB). I suggest that you look into one if you're unable to find something that hooks up easily.
#5
Newbie
Thread Starter
Join Date: Jul 2013
Location: Stavanger, Norway
Posts: 58
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I got a few different Lezyne lights, front and rear, that I've used on both my road and gravel bike the last couple of years. Just wanted something that I dont have to charge up, something that just plugs into the bike. Found a decent one from Lezyne which is Shimano compatible, and it seems like an easy installation down by the motor, plug and screw. The only issues is pulling the wire through the frame. Done it a couple of times on my road bike, but then it was stripped, don't know if I wanna deal with the hassle on my electric hence why I'm looking for a light that plugs directly into the free port underneath the head unit.
Likes For Vingleik Vaagal:
#6
Senior Member
Join Date: Jul 2014
Location: socal
Posts: 4,262
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 881 Post(s)
Liked 820 Times
in
620 Posts
Thank you for your reply. Good luck with the system. It''s really neat to have wires that go through the frame, but not without other challenges.
#7
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,394
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,695 Times
in
2,517 Posts
I want to put a front rack on my wife's Steps bike, so I'll have to move the light. I'll try to remember this thread when I look at it
#8
S'Cruzer
I'm trying to find a light for my e-bike that has a Shimano 5000 motor on it. I have a free port on my terminal underneath the head unit, would be neat to just plug it in there in stead of hard wiring, and trying to get a cable trough the frame down to the motor. The only light I've found which does that is Lupine, but for a cheaper commuter bike that is way beyond what I wanna spend on the convenience of not having to charge my front light. Is there any clever solutions?
Edit: And if I do find out that I wanna wire through the frame and down to the crank and motor, anything I need to connect front and rear lights?
Edit: And if I do find out that I wanna wire through the frame and down to the crank and motor, anything I need to connect front and rear lights?
That third connector on display unit is not for lighting, I'm not sure what its for.
The light connection is down on the motor unit, and require a Shimano SM-DUE01 adapter, that plugs into a block on the mid drive, and provides two screws you can connect your front and rear lights to. Nothing I've found yet tells me how many volts this outputs (my last ebike used 6V LED lamps, it was a random hub motor kit).