The Most Elegant and Swiftest City Bike?
#1
Junior Member
Thread Starter
The Most Elegant and Swiftest City Bike?
I found the starting point on eBay. When the 1971 Raleigh International arrived, it’s condition exceeded my expectations. I wanted to stick to period, and as many British/Euro parts as possible… or at least a period appearance. The wheels, handle bars, and stem, while decent components, weren’t appropriate for my plan and were bartered to a small LBS. The brakes had been replaced with Gran Compes. Other factory components… bottom bracket, headset, seat post, derailleurs and crank are Campagnolo, as they should be.
Of course, before the conversion began, I had to ride it right away, a very old spare set of wheels with an old set of MTB pedals. It immediately struck me as comfortable and quick. I was thrilled.
First I searched for alloy upright bars… a set of engraved Dawes were located. Didn’t know the era, but they’re British, and upright.
Hadn’t come up with good, interesting looking, center pull brakes. The Gran Compes, while new, are impressive, and would certainly do for now. I’ll keep looking.
Weinmann levers, not upscale, but period-ish. The leather wraps are from Walnut in Oregon. The cool end plugs are by Berthoud Cycles in France. I went for better contrast with black cable housings.
Details, details. I like to avoid plastic, or… nylon, when possible. Swapped in some 70’s ferrules from a thrift store purchase.
The sprung Brooks Saddle, bought used, weighs a ton more than the performance ones. But it’s cool, and for upright riding around town… perfect. Still has the Carlton branded seat post fasteners.
The bike came without pedals. As it’s a city bike I hadn’t planned on toe clips. I wanted Campy, but I don’t think Campagnolo made symmetrical pedals. MKS Campy-ish pedals look the part. I may yet go with vintage style half-toe clips.
From the outset I planned swapping to the, very sexy, Super Record chainrings. And went with a slightly smaller inner just so it would be clearly visible. Silly, I know, but elegant.
The result, the bike is elegant(I think so) and an absolute joy to ride, comfortable and quick, for a 50 year old bicycle. The upright position is ideal, for swiftly cruising the town, for this 67 year old. The factory chartreuse paint, and classic details ensures it stands out from the crowd. Of the six bikes I have, it is my favorite, and I routinely ride 50 to 90+ miles a week on it. I have a set of period Campy Record high flange hubs to be built up. In the meantime I’m using my spare, 40 year old, set of Miche hubs w/Rigida rims with Specialized Turbo Cotton 700x24 tires. Actually the low flange hubs are gaining my affection… a clean appearance? Maybe a set of Campy low flange hubs are in my future. And I’m still contemplating improvements.
Of course, before the conversion began, I had to ride it right away, a very old spare set of wheels with an old set of MTB pedals. It immediately struck me as comfortable and quick. I was thrilled.
First I searched for alloy upright bars… a set of engraved Dawes were located. Didn’t know the era, but they’re British, and upright.
Hadn’t come up with good, interesting looking, center pull brakes. The Gran Compes, while new, are impressive, and would certainly do for now. I’ll keep looking.
Weinmann levers, not upscale, but period-ish. The leather wraps are from Walnut in Oregon. The cool end plugs are by Berthoud Cycles in France. I went for better contrast with black cable housings.
Details, details. I like to avoid plastic, or… nylon, when possible. Swapped in some 70’s ferrules from a thrift store purchase.
The sprung Brooks Saddle, bought used, weighs a ton more than the performance ones. But it’s cool, and for upright riding around town… perfect. Still has the Carlton branded seat post fasteners.
The bike came without pedals. As it’s a city bike I hadn’t planned on toe clips. I wanted Campy, but I don’t think Campagnolo made symmetrical pedals. MKS Campy-ish pedals look the part. I may yet go with vintage style half-toe clips.
From the outset I planned swapping to the, very sexy, Super Record chainrings. And went with a slightly smaller inner just so it would be clearly visible. Silly, I know, but elegant.
The result, the bike is elegant(I think so) and an absolute joy to ride, comfortable and quick, for a 50 year old bicycle. The upright position is ideal, for swiftly cruising the town, for this 67 year old. The factory chartreuse paint, and classic details ensures it stands out from the crowd. Of the six bikes I have, it is my favorite, and I routinely ride 50 to 90+ miles a week on it. I have a set of period Campy Record high flange hubs to be built up. In the meantime I’m using my spare, 40 year old, set of Miche hubs w/Rigida rims with Specialized Turbo Cotton 700x24 tires. Actually the low flange hubs are gaining my affection… a clean appearance? Maybe a set of Campy low flange hubs are in my future. And I’m still contemplating improvements.
Last edited by ejw; 06-22-22 at 09:55 PM.
Likes For ejw:
Likes For ollo_ollo:
#3
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 3,658 Times
in
1,677 Posts
Beautiful. My kinda ride too!
Likes For 52telecaster:
#4
Senior Member
Join Date: Oct 2012
Location: Berkeley CA
Posts: 2,533
Bikes: 1981 Ron Cooper, 1974 Cinelli Speciale Corsa, 2000 Gary Fisher Sugar 1, 1986 Miyata 710, 1982 Raleigh "International"
Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 929 Post(s)
Liked 1,289 Times
in
486 Posts
That is a beauty. It is the spitting image of my own International that I toured through Europe and the US on but that was sadly destroyed in a car crash back in 1980. I've always loved the aesthetics of that particular bike and am a bit envious of your find.I guess that I should haunt eBay more often. I would have turned it into a touring bike, but your city bike theme is quite pleasing also. If you ever think about selling (I doubt it), you know where to find me.
Likes For davester:
#5
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,835
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,813 Times
in
1,536 Posts
like like like.... super nice build
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
#6
Senior Member
Join Date: Jun 2021
Posts: 1,683
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,562 Times
in
756 Posts
But can it really be and elegant city bike without...........fenders?
Likes For ehcoplex:
#7
ambulatory senior
Join Date: Dec 2016
Location: Peoria Il
Posts: 5,998
Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.
Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1954 Post(s)
Liked 3,658 Times
in
1,677 Posts
Likes For 52telecaster:
#8
too many bikes
Join Date: Aug 2013
Location: Berkeley, CA
Posts: 64
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 34 Post(s)
Likes: 0
Liked 30 Times
in
16 Posts
I think chain guards on city bike are a classy touch. not easy to do on bikes with rear derailleurs (sans front derailleur), but I also prefer single speed or IGH on city bikes. Fenders are a must even in dry climates. Look forward to seeing this international with more city bike “accoutrements”
Likes For retroshifter:
#9
Senior Member
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,744
Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1
Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 938 Post(s)
Liked 2,923 Times
in
977 Posts
Indeed.
1971 International, Sturmey Archer 8-speed hub city commuter/shopper.
1971 International, Sturmey Archer 8-speed hub city commuter/shopper.
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport
Likes For ascherer:
#10
Junior Member
Thread Starter
Fenders… I have considered shorty wood fenders.
Likes For ejw:
#11
Full Member
Join Date: Aug 2019
Location: Albuquerque
Posts: 227
Bikes: 1st Track bike: 1978 Speedwell titanium 1st Road bike: 2001 Independent Fabrication Crown Jewel
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Liked 116 Times
in
65 Posts
I think chain guards on city bike are a classy touch. not easy to do on bikes with rear derailleurs (sans front derailleur), but I also prefer single speed or IGH on city bikes. Fenders are a must even in dry climates. Look forward to seeing this international with more city bike “accoutrements”
City bike for me would have fenders and a chainguard and MUST have a rack or basket.
A city bike goes to the market, you may commute on it - its gotta have a way to haul stuff.
Gearing would be internal hub or single speed and NOT downtube shifters.
#12
Full Member
Great International build. Looks fast, light, and upright.
Mine's a Super Tourer, not an International, but in the spirit. I love riding this bike around town so much. All the baggage and rackage is employed nearly daily with errandonneuring and joyrides.
Mine's a Super Tourer, not an International, but in the spirit. I love riding this bike around town so much. All the baggage and rackage is employed nearly daily with errandonneuring and joyrides.
Likes For bear_a_bug: