$20 "Clang-Find", 1984 Schwinn High Sierra
#1
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
$20 "Clang-Find", 1984 Schwinn High Sierra
I bought this bike a couple months ago for $20, after BF'er Clang featured it in the "Are you looking for one of these!?" Part II' thread.
It's been sitting in the back of my van ever since, until this morning when I thought I should do my initial assessment. I need to see if the bike that has been building itself in my head will, in fact, be doable.
Because of the obvious signs of heavy use, I have named her "Lotta Myles". This name used to be reserved for certain professional ladies, usually mama-sans, in the brothels on various Pacific islands I visited while in the `Corps. It's time to make her respectable, don't ya think? So I'm building her into a sort of Beer Truck 2.0.
Here she is:
The first thing I checked, of course, was whether the seat and stem were free to be removed. No problems with either of them. Then I started looking at the various non-stock decals, clamps, and accessories that would have to be removed. The P.O. was a big fan of license decals, apparently:
Heat gun and Goo-Gone should take care of those. It appears this guy was also a Data-Driven Cyclist (DDC), judging by the sensors mounted both fore and aft:
Those will have to go. The drivetrain will need some serious attention as well. The FD is toast, and the RD will need to be completely overhauled if I want to use it on this build. I may just replace it with something newer, since this is a custom build anyway. I've decided to strip this bike all the way down to the frame/fork, do some rust treatment, sanding, and touch-up painting. I might even rent a bore-scope to inspect the inside of the frame for rust. Then all bearings will get some nice Phil grease before being reassembled.
I will definitely be using these excellent Suntour friction shifters. Just one of these is worth the price I paid for the whole bike!
The wheels are a bit wobbly, though the sealed hubs still spin freely. I have another 26" wheelset in this O.L.D. that I built up last winter. I'm mounting some seriously cool, fatter tires on those for this project.
For cargo hauling, it will be getting the rack/basket setup from Beer Truck 1.0:
I have a Brooks-style leather saddle ready to go, and the handlebar treatment is still sort-of up-in-the-air. Pedals will be swapped for something nicer, and that's where we are at for the moment. I'll update this thread as I make progress. This should be fun!
*
*
*
It's been sitting in the back of my van ever since, until this morning when I thought I should do my initial assessment. I need to see if the bike that has been building itself in my head will, in fact, be doable.
Because of the obvious signs of heavy use, I have named her "Lotta Myles". This name used to be reserved for certain professional ladies, usually mama-sans, in the brothels on various Pacific islands I visited while in the `Corps. It's time to make her respectable, don't ya think? So I'm building her into a sort of Beer Truck 2.0.
Here she is:
The first thing I checked, of course, was whether the seat and stem were free to be removed. No problems with either of them. Then I started looking at the various non-stock decals, clamps, and accessories that would have to be removed. The P.O. was a big fan of license decals, apparently:
Heat gun and Goo-Gone should take care of those. It appears this guy was also a Data-Driven Cyclist (DDC), judging by the sensors mounted both fore and aft:
Those will have to go. The drivetrain will need some serious attention as well. The FD is toast, and the RD will need to be completely overhauled if I want to use it on this build. I may just replace it with something newer, since this is a custom build anyway. I've decided to strip this bike all the way down to the frame/fork, do some rust treatment, sanding, and touch-up painting. I might even rent a bore-scope to inspect the inside of the frame for rust. Then all bearings will get some nice Phil grease before being reassembled.
I will definitely be using these excellent Suntour friction shifters. Just one of these is worth the price I paid for the whole bike!
The wheels are a bit wobbly, though the sealed hubs still spin freely. I have another 26" wheelset in this O.L.D. that I built up last winter. I'm mounting some seriously cool, fatter tires on those for this project.
For cargo hauling, it will be getting the rack/basket setup from Beer Truck 1.0:
I have a Brooks-style leather saddle ready to go, and the handlebar treatment is still sort-of up-in-the-air. Pedals will be swapped for something nicer, and that's where we are at for the moment. I'll update this thread as I make progress. This should be fun!
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Last edited by DQRider; 09-18-22 at 09:56 AM.
Likes For DQRider:
#2
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,803
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2439 Post(s)
Liked 3,122 Times
in
1,964 Posts
Clang finds the best deals for sure.
i need him searching in Charleston!
i need him searching in Charleston!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
#3
Senior Member
Join Date: Mar 2021
Location: SoCal
Posts: 2,296
Bikes: Cuevas Custom, Cimmaron, 1988 "Pinalized Rockma", 1984 Trek 510, Moulton custom touring, Raleigh Competition GS, Bridgestone Mb-2 & 3, 1980's Peugeot - US, City, & Canyon Express (6)
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1096 Post(s)
Liked 3,738 Times
in
1,836 Posts
#4
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,658
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1609 Post(s)
Liked 2,590 Times
in
1,224 Posts
Owned one of these. Does it have the saddle quick release adjustment?
Likes For curbtender:
#5
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4511 Post(s)
Liked 6,378 Times
in
3,667 Posts
Likes For merziac:
#6
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,038
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4511 Post(s)
Liked 6,378 Times
in
3,667 Posts
@DQRider
HD should have a Ryobi borescope for about $100, mine works pretty well for this.
And many other options as well, many far less expensive.
https://www.google.com/search?q=ryob...nt=firefox-b-1
HD should have a Ryobi borescope for about $100, mine works pretty well for this.
And many other options as well, many far less expensive.
https://www.google.com/search?q=ryob...nt=firefox-b-1
#7
Senior Member
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,925
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1819 Post(s)
Liked 1,693 Times
in
974 Posts
I like the Cannondale water bottle holder in photo #3. Those things were great on bikes without water bottle bosses although I don't know how well it would hold the bottle on the seat tube. I had the Rhode gear cageless water bottle holder on My Raleigh Pro
#8
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
#9
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
#10
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,255 Times
in
1,311 Posts
Hey- glad I could be of some service. It's fun for me to post the deals I find.
Tell me if the heat gun works on those bike licenses. For me, they're usually a weird combination of brittle and tenacious, where they come away chip by chip instead of peeling off all at once.
I do like stripping away cycling computer detritus. It's like clipping vines that have overgrown the bike.
I think Curbtender was talking about the setback seatposts with a fore/aft QR that sometimes came on these High Sierras.
Like so:
Tell me if the heat gun works on those bike licenses. For me, they're usually a weird combination of brittle and tenacious, where they come away chip by chip instead of peeling off all at once.
I do like stripping away cycling computer detritus. It's like clipping vines that have overgrown the bike.
I think Curbtender was talking about the setback seatposts with a fore/aft QR that sometimes came on these High Sierras.
Like so:
Likes For Clang:
#11
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
Hey- glad I could be of some service. It's fun for me to post the deals I find.
Tell me if the heat gun works on those bike licenses. For me, they're usually a weird combination of brittle and tenacious, where they come away chip by chip instead of peeling off all at once.
I do like stripping away cycling computer detritus. It's like clipping vines that have overgrown the bike.
I think Curbtender was talking about the setback seatposts with a fore/aft QR that sometimes came on these High Sierras.
Like so:
Tell me if the heat gun works on those bike licenses. For me, they're usually a weird combination of brittle and tenacious, where they come away chip by chip instead of peeling off all at once.
I do like stripping away cycling computer detritus. It's like clipping vines that have overgrown the bike.
I think Curbtender was talking about the setback seatposts with a fore/aft QR that sometimes came on these High Sierras.
Like so:
No, this bike did not come with one of those.
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
#12
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
I replaced my seat post quick release with a hex key bolt to slow down thieves. The alternative, which I have done in the past, is to take the saddle with me when I leave the bike.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#13
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Likes For Chris Chicago:
#15
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
It's Mockup Time!
One of the most crucial steps in my custom/restoration process is a mockup of the finished product. I do this even before cleaning the dirt off the frame and removing all the hardware. It alerts me to anything that isn't going to fit, parts I may be missing, but most importantly, it motivates me for the rest of the build. Today, I learned several things about this build, but first, here's a photo:
Typical DS view. Remember, this bike's primary mission is to replace Betty Bleu in the Beer Truck role. Plenty of cargo capacity, and big, cushy tires to reduce the jolts and vibrations which cause excess "head" - if you get my drift.
The rack I used for the mockup won't go on the final build. For that, I'll be using one of my custom wooden-deck jobs from another bike that I'm retiring for now. That's a 700c frame, and the brackets will bolt right up in a position where they straddle the brake cable, rather than running under the bridge.
One of the things I learned today, that I wouldn't have if I had skipped the mockup, is that the rear axle on the wheelset I'm using (original to my 84 Dawes Ranger) uses the same Whitworth threads that came on those old British 3-speeds. One of the axle nuts was missing, so I scavenged one from my British bike parts bin.
I'm not sure about the handlebar, I'll have to test-ride it in order to make that decision. Also, I'll need a front brake cable stop that is independent of the stem. I've seen them on other bikes, so I know they're out there. Since I don't typically make beer or grocery runs in the rain, I think I can omit fenders. The saddle will be the black Gyes leather with copper rivets from my Bianchi (Bianchi is getting a Brooks Pro),
Other details to follow as I think of them... you know how I am.
Comments and suggestions are always welcome. I think we're off to a good start!
*
*
*
Typical DS view. Remember, this bike's primary mission is to replace Betty Bleu in the Beer Truck role. Plenty of cargo capacity, and big, cushy tires to reduce the jolts and vibrations which cause excess "head" - if you get my drift.
The rack I used for the mockup won't go on the final build. For that, I'll be using one of my custom wooden-deck jobs from another bike that I'm retiring for now. That's a 700c frame, and the brackets will bolt right up in a position where they straddle the brake cable, rather than running under the bridge.
One of the things I learned today, that I wouldn't have if I had skipped the mockup, is that the rear axle on the wheelset I'm using (original to my 84 Dawes Ranger) uses the same Whitworth threads that came on those old British 3-speeds. One of the axle nuts was missing, so I scavenged one from my British bike parts bin.
I'm not sure about the handlebar, I'll have to test-ride it in order to make that decision. Also, I'll need a front brake cable stop that is independent of the stem. I've seen them on other bikes, so I know they're out there. Since I don't typically make beer or grocery runs in the rain, I think I can omit fenders. The saddle will be the black Gyes leather with copper rivets from my Bianchi (Bianchi is getting a Brooks Pro),
Other details to follow as I think of them... you know how I am.
Comments and suggestions are always welcome. I think we're off to a good start!
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Likes For DQRider:
#16
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Standard issue headset-mounted cable stop (usu. takes the place of the washer between the top cup and the locknut) should fit the bill for the front brake, no? Given how long the head tube is, and that the stem might be "slammed", you might wanna look for one with a fair amount of "drop", so the housing doesn't take a tight turn downward..
Likes For madpogue:
#17
Senior Member
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 4,122
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1119 Post(s)
Liked 2,255 Times
in
1,311 Posts
There's another '84 on the local market and I'm tempted but it's five times the price- scandalous! I'm surprised you're not using the bullmoose bars yours came with, DQRider.
Last edited by Clang; 09-29-22 at 12:28 PM.
Likes For Clang:
#18
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
I can understand. My only bullmoose is on a chrome Ross Mt. Something, it's a conversation starter, but it's very wide for someone with narrow shoulders, and HEAVY. Fine for a special-occasion bike, but for a daily driver, I can imagine more practical options.
#19
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
Now, I know that I could probably polish this thing up and get a pretty penny for it on CL, but if you do buy this other HS, I'll give you my address and you can come pick it up. Let's call it an unsolicited finder's fee!
Just PM me if you are interested.
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Likes For DQRider:
#20
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
Progress Report
The entire frameset has been cleaned, and stupid license decals removed. This actually didn't prove to be much of a struggle. The heat gun worked very well, along with a plastic paint scraper which had to be sharpened a few times during the process with a straight file. Just heat up a section and go at it with the scraper. Rinse and repeat until all the decal material was gone, then go over the area with Goo-gone and a tooth brush, wipe it up with shop towels, and then I washed the entire bike.
I've fitted a brand new Shimano Altus derailleur, because I had it lying around from who knows what. It should work perfectly with the 6-speed freewheel. I'm keeping the original crankset, but replacing two of the chainrings with newer ones. Tonight, I am picking up a rack-basket for the rear ($10 CL find).
This will make it my best Beer Truck Bike ever. I've got black bear-trap pedals ready to go, and I'll probably get new cables tonight as well. This bike should be on the road by the end of the weekend! I'm stoked...
*
*
I've fitted a brand new Shimano Altus derailleur, because I had it lying around from who knows what. It should work perfectly with the 6-speed freewheel. I'm keeping the original crankset, but replacing two of the chainrings with newer ones. Tonight, I am picking up a rack-basket for the rear ($10 CL find).
This will make it my best Beer Truck Bike ever. I've got black bear-trap pedals ready to go, and I'll probably get new cables tonight as well. This bike should be on the road by the end of the weekend! I'm stoked...
Hah! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Jinxed myself RIGHT THERE!
**
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Last edited by DQRider; 09-30-22 at 06:44 PM.
#21
Senior Member
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,395
Bikes: Too many to list
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1765 Post(s)
Liked 1,124 Times
in
746 Posts
I
I will definitely be using these excellent Suntour friction shifters. Just one of these is worth the price I paid for the whole bike!
The wheels are a bit wobbly, though the sealed hubs still spin freely. I have another 26" wheelset in this O.L.D. that I built up last winter. I'm mounting some seriously cool, fatter tires on those for this project.
For cargo hauling, it will be getting the rack/basket setup from Beer Truck 1.0:
I have a Brooks-style leather saddle ready to go, and the handlebar treatment is still sort-of up-in-the-air. Pedals will be swapped for something nicer, and that's where we are at for the moment. I'll update this thread as I make progress. This should be fun!
*
*
*
I will definitely be using these excellent Suntour friction shifters. Just one of these is worth the price I paid for the whole bike!
The wheels are a bit wobbly, though the sealed hubs still spin freely. I have another 26" wheelset in this O.L.D. that I built up last winter. I'm mounting some seriously cool, fatter tires on those for this project.
For cargo hauling, it will be getting the rack/basket setup from Beer Truck 1.0:
I have a Brooks-style leather saddle ready to go, and the handlebar treatment is still sort-of up-in-the-air. Pedals will be swapped for something nicer, and that's where we are at for the moment. I'll update this thread as I make progress. This should be fun!
*
*
*
Argggghhhhhh ---- i remember throwing away a couple of sets of these - probably over 20 years ago - but who knows what will be worth something someday, when all you see in front of you is just a box of dusty old obsolete parts - and perhaps more disturbing , i cant find a set of XC Comp thumbies that i know i actually kept! Ce'st La Vie
Likes For DMC707:
#22
Señor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
I don't think they make tires large enough to properly fit the clearances on that frame. You could almost mount a water bottle under the fork crown.
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
#23
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
#24
Old Boy
Thread Starter
Join Date: Jan 2016
Location: Minnesota
Posts: 2,127
Bikes: Mostly 1st-generation, top-of-the-line, non-unicrown MTBs/ATBs: All 1984 models: Dawes Ranger, Peugeot Canyon Express, Ross Mt. Whitney (chrome), Schwinn High Sierra, and a 1983 Trek 850.
Mentioned: 134 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 1,715 Times
in
611 Posts
SCORE! Odyssee Triple-Trap Pedals and More Progress
A very good friend of mine put these up for sale on CL (NOT the beer, the pedals!):
I took one look and realized I must have them for this build. He gave me his "bike buddy discount", and I ended up scoring them for thirty bucks. The text balloon is NOT advertising! Just bragging on a local legend.
Lotta Myles is coming together nicely. The black leather w/copper rails and rivets Gyes saddle works a treat on this bike.
Still a bit of a mockup, I'm waiting on new chainrings, and the basket which will mate with this rack. That deal is still on, but there's been a delay due to the seller's work schedule. See my red "jinx" remark on the previous post.
Another view:
... and another:
I was walking `round the back of the bike, and noticed this view as well, so here it is:
I feel good about this build. It is coming together like it was meant to be. She will be getting something I have wanted to try, but haven't yet: a shellacked-twine-wrapped chainstay. There are other interesting items coming out of the idea factory between my ears, and I'm sure some will be realized, but that's all I'll say for the moment. Still not sure about the handlebar choice, but we'll see how she rides before I make a final decision on that. Stay tuned...
*
*
*
I took one look and realized I must have them for this build. He gave me his "bike buddy discount", and I ended up scoring them for thirty bucks. The text balloon is NOT advertising! Just bragging on a local legend.
Lotta Myles is coming together nicely. The black leather w/copper rails and rivets Gyes saddle works a treat on this bike.
Still a bit of a mockup, I'm waiting on new chainrings, and the basket which will mate with this rack. That deal is still on, but there's been a delay due to the seller's work schedule. See my red "jinx" remark on the previous post.
Another view:
... and another:
I was walking `round the back of the bike, and noticed this view as well, so here it is:
I feel good about this build. It is coming together like it was meant to be. She will be getting something I have wanted to try, but haven't yet: a shellacked-twine-wrapped chainstay. There are other interesting items coming out of the idea factory between my ears, and I'm sure some will be realized, but that's all I'll say for the moment. Still not sure about the handlebar choice, but we'll see how she rides before I make a final decision on that. Stay tuned...
*
*
*
__________________
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
Roulez pour la joie, jamais pour la douleur.
USMC 1981-1991 Semper Fi!
#25
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,803
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2439 Post(s)
Liked 3,122 Times
in
1,964 Posts
Do you find the chain to be lightweight...?
Hee hee.
Looks fantastic. Are you keeping the patina on the pinch bolt. If it is Suntour, those guys do great in evaporust.
Hee hee.
Looks fantastic. Are you keeping the patina on the pinch bolt. If it is Suntour, those guys do great in evaporust.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Last edited by jdawginsc; 10-01-22 at 02:50 PM.
Likes For jdawginsc: