Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Survivors

Old 06-10-20, 07:30 PM
  #1  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Survivors

I'm just getting finished up on these his-n-hers early-'70's Western Flyer 5-speeds, warehouse finds from up in Centralia. I know it's like finding a pair of pristine AMC Gremlins, but that's what these bikes are. Millions were sold, very few remain, having mostly rusted into dust. These had been in a heated warehouse for at least 20 years, and literally all I had to do was clean them and lube them. New tires and brake pads, but everything else is original, probably sold from the old Western Auto store in Centralia. This one is the 26-inch men's Lightweight 5-speed, 22" frame; the twist-grip, twin-cable Lark-W derailleur dates the bikes to '71-'74. The 19" women's is in identical condition. The ride takes me back to my childhood; I rode several of those '60's-'70's Western Flyers right into the ground. These 5-speeds are also pretty rare; everyone bought 3-speeds or 10-speeds. I know, they're nothing special, but they are a part of American cycling that is vanishing. In the classic car world, these would be called "survivors." They're going to be great riding around the campgrounds.









Last edited by Duxrule; 06-10-20 at 07:34 PM.
Duxrule is offline  
Old 06-10-20, 08:36 PM
  #2  
Cougrrcj
Senior Member
 
Cougrrcj's Avatar
 
Join Date: Jul 2011
Location: NE Ohio
Posts: 3,478

Bikes: A few...

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 620 Post(s)
Liked 370 Times in 256 Posts
OH, ABSO-FREAKING LOVELY! I really liked my Sears Free Spirit three-speed that i had from '70-74 -- why only four-five years? Because I rode it in the Rustbelt winters, too, with all of that nasty road salt.... The frame literally rusted away, despite me detail-'rebuilding' it every year at Christmas break down to the smallest components.. I hit a ice clod/clinker on the side of the road and the toptube broke at the seatpost. I had it welded, but it only lasted a couple of weeks before it broke again right next to the weld - the tubing was rotted out from the inside and very thin... That Spring I got my first derailleur-equipped 10-speed - an all-steel '74 Fuji Special Tourer...
Cougrrcj is offline  
Likes For Cougrrcj:
Old 06-10-20, 09:09 PM
  #3  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times in 165 Posts
WOW that thing looks NOS!!!
__________________
"My only true wisdom is in knowing I have none" -Socrates
Hudson308 is offline  
Likes For Hudson308:
Old 06-10-20, 09:17 PM
  #4  
lasauge 
Pedalin' Erry Day
 
lasauge's Avatar
 
Join Date: Jun 2011
Location: Newbury Park, CA
Posts: 1,144
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 754 Post(s)
Liked 365 Times in 196 Posts
A couple of days ago I had the pleasure experience of wrenching on nearly the same bike except that it had a Firestone headbadge and had been left outside under a deck for the last 20 years. It's neat to see what one of these would have looked like new, thanks for posting it!
lasauge is offline  
Likes For lasauge:
Old 06-11-20, 12:18 PM
  #5  
ascherer 
Senior Member
 
ascherer's Avatar
 
Join Date: Jul 2007
Location: Manhattan & Woodstock NY
Posts: 2,736

Bikes: 1987 Mercian Pro, 1985 Shogun 500, early '70s Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Raleigh International, 1971 Peugeot PX-10, 1970 Raleigh Professional Mk1

Mentioned: 109 Post(s)
Tagged: 0 Thread(s)
Quoted: 937 Post(s)
Liked 2,909 Times in 972 Posts
Very cool to see, even though I wouldn't have been caught dead on one when they were new!
__________________
1987 Mercian Pro, 1985 Shogun 500, 197? Falcon San Remo, 1972 Peugeot PX-10, 1972 Schwinn Paramount P13-9, 1971 Peugeot PX-10, 1971 Raleigh International, 1970 Raleigh Professional Mark I
Curator/Team Mechanic: 2016 Dawes Streetfighter, 1984 Lotus Eclair, 1975 Motobecane Jubile Mixte, 1974 Raleigh Sports, 1973 Free Spirit Ted Williams, 1972 Raleigh Super Course, 1971 Philips Sport





ascherer is offline  
Likes For ascherer:
Old 06-11-20, 02:48 PM
  #6  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Not NOS, original. It was like working on brand-new bikes. Nothing broken, bent or missing, only grime and a tiny bit of surface rust. All I had to do was pack the bearings and adjust the cables. It was actually kind of surreal.
Duxrule is offline  
Old 06-11-20, 02:49 PM
  #7  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Well, we couldn't afford Schwinns, but we could get enough money together to get one of these and get mobile. Millions of American kids rode billions of miles on bikes like these.
Duxrule is offline  
Likes For Duxrule:
Old 06-11-20, 02:53 PM
  #8  
jackbombay
Senior Member
 
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times in 270 Posts
Its beautiful!

I've not seen a double cable rear derr like that before, how does it shift?

I'd love to know the storage costs on that bike!
jackbombay is offline  
Old 06-11-20, 02:53 PM
  #9  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Like I said in the other post, it was almost surreal working on these, they were almost like new. That being said, I'm afraid it's been like taking the mummy out of the sarcophagus, and they crumble into dust. You can almost watch them rust. I think I need to work on killing that, and then hit them with some clearcoat, to try and preserve what's left of the paint and steel
.
Duxrule is offline  
Old 06-11-20, 02:54 PM
  #10  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 2,144

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules (sold) : 1966 Schwinn Deluxe Racer (sold)

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1739 Post(s)
Liked 1,014 Times in 696 Posts
I had to check the name of the place you found these. Growing up in PA, there was only one Centralia.
Unca_Sam is offline  
Likes For Unca_Sam:
Old 06-11-20, 02:55 PM
  #11  
jackbombay
Senior Member
 
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times in 270 Posts
Originally Posted by Duxrule
You can almost watch them rust. I think I need to work on killing that, and then hit them with some clearcoat, to try and preserve what's left of the paint and steel
.
3 coats of car wax on the chrome the paint, and everything else except the braking surfaces on the rims?
jackbombay is offline  
Likes For jackbombay:
Old 06-11-20, 03:21 PM
  #12  
Miele Man
Senior Member
 
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624

Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times in 640 Posts
Freaking AWESOME!

Cheers
Miele Man is offline  
Likes For Miele Man:
Old 06-11-20, 03:26 PM
  #13  
nomadmax 
Senior Member
 
Join Date: Jun 2018
Location: SW Ohio
Posts: 2,397
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1104 Post(s)
Liked 1,824 Times in 878 Posts
That's some kind of nice!
nomadmax is offline  
Likes For nomadmax:
Old 06-11-20, 03:40 PM
  #14  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
It's actually pretty cool. My understanding is that there's no spring in the derailleur, and the tension between the two cables is what maintains the parallelogram. It's actually a pretty sweet setup, since you have to find the gears on these as you go, there's no indexing (I think I'm going to get this pretty closely dialed in, though). Instead of having to take your hand off the grip and find a shifter, the whole thing is right there in your palm. You get a lot of feel.
Duxrule is offline  
Old 06-11-20, 03:43 PM
  #15  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Originally Posted by jackbombay
3 coats of car wax on the chrome the paint, and everything else except the braking surfaces on the rims?
I've already started with one coat; I can add more. The thing is, there's orange peeling on the fenders, along with some other breakdowns. Just like the rest of the bike, the paint is not of the highest quality.

Last edited by Duxrule; 06-11-20 at 03:48 PM.
Duxrule is offline  
Old 06-11-20, 03:45 PM
  #16  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Originally Posted by Unca_Sam
I had to check the name of the place you found these. Growing up in PA, there was only one Centralia.
I actually thought about that when I was posting, since I knew there was more than one.
Duxrule is offline  
Old 06-11-20, 04:12 PM
  #17  
uncle uncle
Senior Member
 
Join Date: Aug 2010
Location: south kansas america
Posts: 1,910

Bikes: too many

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 411 Post(s)
Liked 234 Times in 140 Posts
Originally Posted by Unca_Sam
I had to check the name of the place you found these. Growing up in PA, there was only one Centralia.
My birth state has a Centralia too...
https://en.wikipedia.org/wiki/Centralia,_Kansas
uncle uncle is offline  
Likes For uncle uncle:
Old 06-11-20, 04:18 PM
  #18  
uncle uncle
Senior Member
 
Join Date: Aug 2010
Location: south kansas america
Posts: 1,910

Bikes: too many

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 411 Post(s)
Liked 234 Times in 140 Posts
Love 'em. Even though they aren't what most people on this corner of Bike Forums hunt out, I agree with you that they are a part of the bicycling heritage of the USA. One which you don't see to many surviving examples of anymore. Not every bike needs to be fast or efficient or even that good to bring a nostalgic smile to one's face.
uncle uncle is offline  
Likes For uncle uncle:
Old 06-11-20, 05:53 PM
  #19  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Originally Posted by jackbombay
Its beautiful!

I've not seen a double cable rear derr like that before, how does it shift?

I'd love to know the storage costs on that bike!
I'm pretty sure that these were in the back of a warehouse that was family-owned for generations, and the seller said that he was finally cleaning it out. There was way more cool stuff, but I was dialed in on these.
Duxrule is offline  
Old 06-11-20, 06:41 PM
  #20  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,642

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2607 Post(s)
Liked 1,693 Times in 932 Posts
Originally Posted by Duxrule
That being said, I'm afraid it's been like taking the mummy out of the sarcophagus
Ah-Ha! It was YOU who unleashed the mummy's curse to scourge the land! A thousand years of pestilence!!!

Cool bike!
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Likes For The Golden Boy:
Old 06-11-20, 06:47 PM
  #21  
Duxrule
Member
Thread Starter
 
Join Date: Jun 2017
Posts: 37
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 9 Times in 5 Posts
Just wait for the supervolcano.
Duxrule is offline  
Likes For Duxrule:
Old 06-11-20, 06:47 PM
  #22  
Iron Horse
Junior Member
 
Join Date: Jan 2013
Location: South central Kansas
Posts: 87

Bikes: Western Flyer, Schwinn, Rollfast, Gambles, J.C. Higgins, Waverley, Crescent, Hercules, Nishiki, Huffy, Mohawk, AMF, Electra, A ridable replica hi-wheel and a few others.

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 45 Times in 19 Posts
I have a bike almost exactly like that! Only difference is the chain guard on the crank, and the matching "pie plate" on the rear wheel. Not near as pristine, but rides great even with its weight. The handlebars were a little awkward getting used to, but it's a good riding bike. I love the push/pull shifting system. Very easy to get used to. I will try to get it out this weekend, and get some pics.
Iron Horse is offline  
Likes For Iron Horse:
Old 06-11-20, 11:43 PM
  #23  
jackbombay
Senior Member
 
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times in 270 Posts
Originally Posted by uncle uncle
Not every bike needs to be fast or efficient or even that good to bring a nostalgic smile to one's face.
This!!!
jackbombay is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.