Left foot forward
#1
Newbie
Thread Starter
Join Date: May 2022
Posts: 10
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Left foot forward
Hi all, recently built a wheel and noticed it's slightly out of dish, needs pulling over to drive side, I only noticed as I slammed my wheel and saw it. I understand the principle, loosen opposite side spokes half a turn and the tighten other side half a turn to pull rim over. The problem that's confusing me is that it's a crossed laced rim. So which side would I need to tighten/loosen in this case
#2
Hack
Join Date: Sep 2015
Location: Ottawa, Ontario, Canada
Posts: 1,265
Bikes: TrueNorth CX bike, 88 Bianchi Strada (currently Sturmey'd), Yess World Cup race BMX, Pure Cruiser race BMX, RSD Mayor v3 Fatbike
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 189 Times
in
131 Posts
I'm not sure from your post exactly what's confusing you, but I do know where to send you - SheldonBrown.com.
https://www.sheldonbrown.com/wheelbuild.html
Or if you're more for videos than text and pictures, Park Tool YouTube channel.
https://www.sheldonbrown.com/wheelbuild.html
Or if you're more for videos than text and pictures, Park Tool YouTube channel.