Can you really ride a Domane as fast as a race bike?
#1
Senior Member
Thread Starter
Join Date: Jul 2015
Location: New York, NY
Posts: 78
Bikes: 2015 Cervelo R3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Can you really ride a Domane as fast as a race bike?
Okay, so I have a question for someone more experienced than me. I'm looking around at new bikes, and I keep asking myself the same question. I've read all the marketing lingo about the Domane and the Roubaix. (But let's focus on the Domane to make this simple.) All the marketing, promotional stuff, and reviews say you can ride the Domane as fast as any other race bike. I can understand if they're talking about a 50+ mile ride, where fatigue may slow a rider over distance on a less comfortable bike.
--> But what about sprints, or 10-20 mile rides where fatigue isn't the defining factor? Is the claim still true?
Given how high the head tubes are, all things being equal the aero drag will be much greater on a Domane than a regular road racer, like a Madone H1, and I bet it would be more fatiguing to keep yourself in a lower aero position on the Domane than the Madone, where the fit is naturally low with longer reach. I realize that you can ride ANY bike faster if you can put down more power, but my question is about comparing the same rider on different bikes.
Curious to hear how much of the marketing buzz is true. Thanks!
--> But what about sprints, or 10-20 mile rides where fatigue isn't the defining factor? Is the claim still true?
Given how high the head tubes are, all things being equal the aero drag will be much greater on a Domane than a regular road racer, like a Madone H1, and I bet it would be more fatiguing to keep yourself in a lower aero position on the Domane than the Madone, where the fit is naturally low with longer reach. I realize that you can ride ANY bike faster if you can put down more power, but my question is about comparing the same rider on different bikes.
Curious to hear how much of the marketing buzz is true. Thanks!
#2
Senior Member
Join Date: Jul 2015
Location: Ottawa, Canada
Posts: 118
Bikes: Surly Cross-Check, Rescued early 1990s Frankenbike (Univega frame; mix of found Centaur and Daytona parts); mid-1990s Casati, Linus Gaston
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Of course it will make you go faster.
On a side note, I am selling an all-natural herbal product which is guaranteed to be 3 times more effective than Viagra. Interested?
On a side note, I am selling an all-natural herbal product which is guaranteed to be 3 times more effective than Viagra. Interested?
Likes For geehue:
#3
Junior Member
Join Date: Jul 2015
Location: Vancouver BC
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Really unless you are a top pro it's more about the engine then the bike. A couple of guys I ride with are on Roubaix an they certainly are faster than I am on my Emonda.
#4
Senior Member
Join Date: Apr 2013
Location: SoCal
Posts: 6,496
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 276 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
There is a guy I follow on Strava that has a Roubaix S Works and he regularly does 50 mile rides with approx 3000 feet of climbing and averages 17 mph. And he's probably in his late 50s and that's on solo rides. So if you are a strong rider a "fast" endurance bike shouldn't slow you down and I'm sure there are people that benefit from them and are faster than they would be on a more aggressive bike.
#5
Senior Member
Thread Starter
Join Date: Jul 2015
Location: New York, NY
Posts: 78
Bikes: 2015 Cervelo R3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Makes sense. What about for the same rider?
For example, with my stem up vs slammed on my only bike I gain an extra roughly 1.2 - 1.5 mph in speed with the same perceived effort in the same gear just from aerodynamic advantage.
#6
Senior Member
Thread Starter
Join Date: Jul 2015
Location: New York, NY
Posts: 78
Bikes: 2015 Cervelo R3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#7
Senior Member
Thread Starter
Join Date: Jul 2015
Location: New York, NY
Posts: 78
Bikes: 2015 Cervelo R3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Incidentally, I figured I knew the answer to the question. However, I was curious to hear others' opinions.
#8
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
Ask Spartacus. It does not appear to be holding him back
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#9
ka maté ka maté ka ora
Join Date: Oct 2008
Location: wessex
Posts: 4,423
Bikes: breezer venturi - red novo bosberg - red, pedal force cg1 - red, neuvation f-100 - da, devinci phantom - xt, miele piste - miche/campy, bianchi reparto corse sbx, concorde squadra tsx - da, miele team issue sl - ultegra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
#10
Senior Member
Thread Starter
Join Date: Jul 2015
Location: New York, NY
Posts: 78
Bikes: 2015 Cervelo R3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I get it, but Cancellera rides a custom Domane in the classics, which has an "H1" fit or more aggressive. It has the same IsoSpeed decoupler, but it doesn't have the same geometry as the normal Domane the rest of us ride. (With one exception, which is that there is a higher-end version called the Domane Classics Edition with a "pro" fit that is probably similar to his.) His bike is inevitably going to be quicker, as his bike's fit will yield a more aero position than the upright position the rest of the Domanes share.
My question really was a scientific inquiry and I should have worded it differently: what is the average speed delta between a Madone and a Domane for the same 6' tall rider who can apply 230 Watt FTP over the same flat course over, say, 30 minutes, where long-term fatigue is not a variable? There WILL be a delta due to the aerodynamic differences inherent in an upright vs a low position.
Last edited by bigcicero; 08-12-15 at 06:44 PM.
#11
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
^ so, his frame tends to set up with a lower position.
I'm willing to bet that the vast majority of people can set up an off the rack Domane as aero as they need to be, or can handle, with the right stem, frame size, spacers.
So if you actually "get it". the answer to your question is simple: given the geometry, most notably head tube length, can I fit on a Domane with the amount of seat to bar drop I need?
If the answer is yes, then yes, if its no (which I doubt) then no.
The answer is found in actually swinging a leg over the top tube.
I'm willing to bet that the vast majority of people can set up an off the rack Domane as aero as they need to be, or can handle, with the right stem, frame size, spacers.
So if you actually "get it". the answer to your question is simple: given the geometry, most notably head tube length, can I fit on a Domane with the amount of seat to bar drop I need?
If the answer is yes, then yes, if its no (which I doubt) then no.
The answer is found in actually swinging a leg over the top tube.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#12
ka maté ka maté ka ora
Join Date: Oct 2008
Location: wessex
Posts: 4,423
Bikes: breezer venturi - red novo bosberg - red, pedal force cg1 - red, neuvation f-100 - da, devinci phantom - xt, miele piste - miche/campy, bianchi reparto corse sbx, concorde squadra tsx - da, miele team issue sl - ultegra
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
actually, for the OP, it isn't going to make a perceptible difference.
#13
Senior Member
Join Date: Apr 2010
Location: So Cal
Posts: 1,657
Bikes: Cervelo S2, Workswell 062, Banshee Spitfire
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
There are always ways to get lower. Like run a -17 (If you need lower, Syntace, FSA, Deda all have stems that go lower), run a traditional bend bar where there is a deeper drop and the hoods sit lower on the bar, or even go one size down on the frame.
#16
Senior Member
Join Date: Sep 2013
Location: SW ONTARIO
Posts: 525
Bikes: P1 Domane Di2, SLR Emonda Di2, Trek Farley 9 Fatbike
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I own both a Domane Project 1 - Di2 Ultegra and a Emonda SLR Di2 DA. Both run same Continental 4000s11 x25 aired up to 95 on front and 105 on rear. Wheels are different, Domane has Bontragger RXLTLR and Emonda has DA C35. Emonda is 3.5 #'s lighter. I have cross checked all my Garmin data as I ride both bikes frequently averaging 400 to 500 kms per week. My average speed remains the same on both bikes with no noticeable difference. For sure the lighter bike is quicker on the climbs but my average week would see 1500 to 2000 ft of climbing, flat land here. That is best example I can give you that the Domane is not slower by design.
#17
Serious Cyclist
Join Date: Aug 2011
Location: RVA
Posts: 9,308
Bikes: Emonda SL6
Mentioned: 97 Post(s)
Tagged: 1 Thread(s)
Quoted: 5721 Post(s)
Liked 261 Times
in
99 Posts
I get it, but Cancellera rides a custom Domane in the classics, which has an "H1" fit or more aggressive. It has the same IsoSpeed decoupler, but it doesn't have the same geometry as the normal Domane the rest of us ride. (With one exception, which is that there is a higher-end version called the Domane Classics Edition with a "pro" fit that is probably similar to his.) His bike is inevitably going to be quicker, as his bike's fit will yield a more aero position than the upright position the rest of the Domanes share.
My question really was a scientific inquiry and I should have worded it differently: what is the average speed delta between a Madone and a Domane for the same 6' tall rider who can apply 230 Watt FTP over the same flat course over, say, 30 minutes, where long-term fatigue is not a variable? There WILL be a delta due to the aerodynamic differences inherent in an upright vs a low position.
My question really was a scientific inquiry and I should have worded it differently: what is the average speed delta between a Madone and a Domane for the same 6' tall rider who can apply 230 Watt FTP over the same flat course over, say, 30 minutes, where long-term fatigue is not a variable? There WILL be a delta due to the aerodynamic differences inherent in an upright vs a low position.
#18
Senior Member
Join Date: Dec 2009
Location: Houston, TX
Posts: 28,682
Bikes: 1990 Romic Reynolds 531 custom build, Merlin Works CR Ti custom build, super light Workswell 066 custom build
Mentioned: 109 Post(s)
Tagged: 1 Thread(s)
Quoted: 6556 Post(s)
Likes: 0
Liked 58 Times
in
36 Posts
So really this boils down to how much H1 vs H2 geometry affects things (so head tube height, not really Domane vs. Madone necessarily). Assuming the same stack height and stem, how much of a difference is there between H1 and H2, height-wise? It's probably less than the difference between riding on the hoods vs drops on any other road bike as far as body positioning goes. You can probably find an analytical tool to estimate the difference in speed for a given effort, it's probably quite small (less than .2 or .3 MPH).
#19
SuperGimp
Horses for courses. If you want to do crits, get a crit bike. if you want to do long road races, the possibilities expand.
#20
Voice of the Industry
Join Date: May 2007
Posts: 12,572
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
I was waiting for someone to mention what exactly came to mind when I read the OP's question. No surprise you got it Merlin.
The Domane and not the Madone was Cancellara's only race bike. Endurance all the time.
For the vast majority of riders who are low CAT or pro's an endurance geometry will be faster and more comfortable with less fatigue later into the ride. I have two older CAT2 friends that are on Roubaixs. Its about the rider and his/her preference.
The Domane and not the Madone was Cancellara's only race bike. Endurance all the time.
For the vast majority of riders who are low CAT or pro's an endurance geometry will be faster and more comfortable with less fatigue later into the ride. I have two older CAT2 friends that are on Roubaixs. Its about the rider and his/her preference.
#21
Voice of the Industry
Join Date: May 2007
Posts: 12,572
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
There is stack and reach of the frame, and then there is drop and reach of the complete bike. What others were saying is that similar aize frames intended for different applications with different stack and reach (but close as in Emonda and Domane) can usually be run with the same drop from saddle to bar and reach from saddle to bar as finished bikes. It is just a matter of stem and spacer choices. Often the endurance frame has other attributes besides stack and reach that make it more comfy over the long haul such as elastomeric couplings between the rear triangle and main frame. Those won't slow your down in a sprint, but will make the long ride more comfy. So an endurance bike set up more aggressvely can be a very good all purpose solution.
Last edited by Campag4life; 08-13-15 at 05:35 AM.
#22
Member
Join Date: Jan 2015
Posts: 26
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
All that matters is you body position on the bike. If you ride with your elbows locked and arms straight, then a higher hand position - from stack, spacers, stem, bars, ergo position - will translate into a more upright position, more drag, and less speed.
If like most people you can bend your elbows and lean forward, you'll be able to reach a similar position on almost any road bike that fits you, and will thus be able to reach the same speed.
Comfort has been shown to depend mosty on tire quality and pressure, with frame compliance being only a very small factor.
If like most people you can bend your elbows and lean forward, you'll be able to reach a similar position on almost any road bike that fits you, and will thus be able to reach the same speed.
Comfort has been shown to depend mosty on tire quality and pressure, with frame compliance being only a very small factor.
#23
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,445
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4234 Post(s)
Liked 2,949 Times
in
1,808 Posts
Are you sure its tgat big a difference? When you say up, does it have you sitting bolt upright or something That big a difference would be more likely due to position allowing different muscle use than aero differences.
__________________
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),1990 Concorde Aquila(hit by car while riding), others in build queue "when I get the time"
Bikes: 1996 Eddy Merckx Titanium EX, 1989/90 Colnago Super(issimo?) Piu(?),
#24
Voice of the Industry
Join Date: May 2007
Posts: 12,572
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1188 Post(s)
Likes: 0
Liked 8 Times
in
8 Posts
All that matters is you body position on the bike. If you ride with your elbows locked and arms straight, then a higher hand position - from stack, spacers, stem, bars, ergo position - will translate into a more upright position, more drag, and less speed.
If like most people you can bend your elbows and lean forward, you'll be able to reach a similar position on almost any road bike that fits you, and will thus be able to reach the same speed.
Comfort has been shown to depend mosty on tire quality and pressure, with frame compliance being only a very small factor.
If like most people you can bend your elbows and lean forward, you'll be able to reach a similar position on almost any road bike that fits you, and will thus be able to reach the same speed.
Comfort has been shown to depend mosty on tire quality and pressure, with frame compliance being only a very small factor.
Last edited by Campag4life; 08-13-15 at 11:17 AM.