Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

P-clips on Aluminum fork?

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

P-clips on Aluminum fork?

Thread Tools
 
Search this Thread
 
Old 08-07-22, 10:31 AM
  #1  
Piff 
Senior Member
Thread Starter
 
Piff's Avatar
 
Join Date: Nov 2013
Location: Southern California
Posts: 1,455
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 795 Post(s)
Liked 746 Times in 407 Posts
P-clips on Aluminum fork?

I would like to be able to install pclips (these tubus ones: clamp set - Accessories rear carriers - Tubus) on an aluminum fork to install a front rack, the Soma Lucas. The fork is a NOS Sakae Litage. I wouldn't carry any more than 10 pounds on the rack probably.

Okay? Not okay? Would it be alright if I just wrapped the fork blades with copious electrical tape where I mount the pclips?
Piff is offline  
Old 08-08-22, 06:58 AM
  #2  
cyccommute 
Mad bike riding scientist
 
cyccommute's Avatar
 
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,342

Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones

Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,202 Times in 2,358 Posts
Originally Posted by Piff
I would like to be able to install pclips (these tubus ones: clamp set - Accessories rear carriers - Tubus) on an aluminum fork to install a front rack, the Soma Lucas. The fork is a NOS Sakae Litage. I wouldn't carry any more than 10 pounds on the rack probably.

Okay? Not okay? Would it be alright if I just wrapped the fork blades with copious electrical tape where I mount the pclips?
The Tubus clamps are far better than normal vinyl coated P-clamps. They mount very solidly and aren’t likely to move like P-clamps do. They come with a friction tape for the install so use that instead of electrical tape and make sure the clamp is tight enough to keep from moving on the fork blade but not so tight that it causes damage to the blade. As long as the clamp stays in place, you shouldn’t have any issues with damaging the metal.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!



cyccommute is offline  
Likes For cyccommute:
Old 08-08-22, 07:22 AM
  #3  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,056

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4195 Post(s)
Liked 3,837 Times in 2,295 Posts
I'll second not using electrical tape. It will compress and slide between the layers quite easily over time and with stress. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Likes For Andrew R Stewart:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.