ISO and for trade thread part 5
05-15-20, 07:57 PM
#2476
Senior Member
Andy, thanks for the offer, which I might yet take you up on. But since I had never heard of Normandy hubs with oilers, I did a search and came up with this old BF thread:
https://www.bikeforums.net/classic-v...oil-ports.html
A link within the thread seems to suggest that those particular hubs were manufactured for only a very short period of time and are perhaps sought after and somewhat valuable. I wanted to mention that since I'm basically looking for a good-quality but not necessarily super high-end wheelset. If those Normandy hubs are collector's items, you might want to hang onto them. JV
https://www.bikeforums.net/classic-v...oil-ports.html
A link within the thread seems to suggest that those particular hubs were manufactured for only a very short period of time and are perhaps sought after and somewhat valuable. I wanted to mention that since I'm basically looking for a good-quality but not necessarily super high-end wheelset. If those Normandy hubs are collector's items, you might want to hang onto them. JV
05-15-20, 08:41 PM
#2477
Senior Member
Have: nice black first gen DA downtube shifters, banded.
Want: same in silver. For my Sekine project.
Thanks!
Want: same in silver. For my Sekine project.
Thanks!
05-16-20, 08:53 AM
#2478
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,409
Bikes: https://www.theheadbadge.com
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 4,099 Times
in
2,015 Posts
ISO this particular Origin8 chain tensioner or any knockoff of it. Seems to be out of stock/gone everywhere, but it's one of the few of this design that has a non-sprung upper pivot.
-Kurt
-Kurt
__________________
05-16-20, 09:49 AM
#2479
Junior Member
Join Date: Oct 2017
Location: Chicago, IL
Posts: 79
Bikes: 1988 Ross Centaur, 2010 Fuji Connoisseur, 2015 Raleigh Tamland 1, 2017 Raleigh Carlton, 1987 Team Miyata, 2012 Soma Stanyan, 2015 Cinelli Supercorsa, 1984 Miyata 1000, [2009 Scattante SSR], [1988 Falcon Competitor 105], [2016 Soma Wolverine]
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Likes: 0
Liked 12 Times
in
10 Posts
05-16-20, 09:01 PM
#2480
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,409
Bikes: https://www.theheadbadge.com
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 4,099 Times
in
2,015 Posts
did you check out Problem Solvers?
https://problemsolversbike.com/produ...sioner_-_27543
https://problemsolversbike.com/produ...sioner_-_27543
Found it at ModernBike...$54 bucks! Nutty price for a $25 tensioner.
-Kurt
__________________
05-16-20, 10:04 PM
#2481
Junior Member
Trading a trek 660 if anyone's interested. Lovely bike but slightly too big, and i'm looking for a bicycle 53-55cm this time. The trek 660 is 22.5"/57 center to top of seat lug, ~56.5 c-c top tube.
Local to NYC. Don't hesitate to reach out.
Local to NYC. Don't hesitate to reach out.
05-17-20, 07:03 AM
#2482
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
I checked Velobase, I think it would work. I will take a pic tonight.
Found them. Band stinks, levers ok...ish. see pics. Can swap just levers, if they work for you.
Well isn't that nice, uploading works for me again... (:
Last edited by Last ride 76; 05-17-20 at 07:29 AM.
05-17-20, 08:56 AM
#2483
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 5,484
Bikes: Panasonic PT-4500
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1732 Post(s)
Liked 2,143 Times
in
1,293 Posts
Update - Got a set
Probably more for purchase. Looking for 40 spoke rear hub, either freewheel or cassette will work but prefer idea of a cassette hub. Looks don't matter as long as interior not rough. I'm told that a tandem hub will work for a touring bike if I replace or shorten the axle.
should've said for frame with 130mm spacing
Probably more for purchase. Looking for 40 spoke rear hub, either freewheel or cassette will work but prefer idea of a cassette hub. Looks don't matter as long as interior not rough. I'm told that a tandem hub will work for a touring bike if I replace or shorten the axle.
should've said for frame with 130mm spacing
Last edited by WGB; 05-22-20 at 07:22 AM.
05-17-20, 09:35 AM
#2484
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,935
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
For trade/sail/available: LONG steerer tube fork, Ishiwata tubing, from a Team Fuji. Pics here:
https://www.flickr.com/photos/560928...7714305264633/
I'm still looking for a nice condition 36h Campagnolo Record low flange front hub.
Would also trade for greenbacks (just realize that the fork can be cheap, the shipping is going to be costly).
https://www.flickr.com/photos/560928...7714305264633/
I'm still looking for a nice condition 36h Campagnolo Record low flange front hub.
Would also trade for greenbacks (just realize that the fork can be cheap, the shipping is going to be costly).
Last edited by Last ride 76; 05-17-20 at 09:49 AM.
05-17-20, 11:31 PM
#2485
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,409
Bikes: https://www.theheadbadge.com
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 4,099 Times
in
2,015 Posts
I've come to realize that the double brake lever that Sunlite sells has an inherent flaw - if one cable breaks, you lose all braking.
As such, I'm checking around to see if anyone has a Paul Duplex lever kicking about. Black, preferably.
-Kurt
As such, I'm checking around to see if anyone has a Paul Duplex lever kicking about. Black, preferably.
-Kurt
__________________
05-18-20, 03:38 PM
#2486
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,570
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Motobecane(2), Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 589 Post(s)
Likes: 0
Liked 629 Times
in
297 Posts
WTT: I have a very nice Campagnolo NR rear derailleur PAT 84 that I would like to trade for same PAT 77 or 78. Photos on request.
05-18-20, 06:46 PM
#2487
Senior Member
Join Date: May 2019
Location: Bloomington, IN
Posts: 2,710
Bikes: Paramount, Faggin, Ochsner, Ciocc, Basso
Mentioned: 107 Post(s)
Tagged: 0 Thread(s)
Quoted: 1191 Post(s)
Liked 1,614 Times
in
996 Posts
It looks like I will put it on the race cleaner to make it get back to mirror finish.
05-18-20, 08:19 PM
#2488
Full Member
Looking for something very specific.
Need an 1 1/8" quill stem with a 31.8" clamp. Black. With a 30-45 degree rise. Length of about 90mm would be great. Oh, and a removable faceplate.
Can trade money or various parts if you have those diamond in the rough.
Thanks
Need an 1 1/8" quill stem with a 31.8" clamp. Black. With a 30-45 degree rise. Length of about 90mm would be great. Oh, and a removable faceplate.
Can trade money or various parts if you have those diamond in the rough.
Thanks
05-18-20, 09:41 PM
#2489
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,409
Bikes: https://www.theheadbadge.com
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 4,099 Times
in
2,015 Posts
ISO: The rear triangle of something steel, C&V, quality, but overbuilt. Frames with front end crash damage would do. Want to make a home-brew bakfiets cargo bike.
-Kurt
-Kurt
__________________
05-19-20, 04:10 PM
#2490
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,605
Bikes: Indeed!
Mentioned: 91 Post(s)
Tagged: 0 Thread(s)
Quoted: 1450 Post(s)
Liked 3,146 Times
in
1,053 Posts
Wanted - Campagnolo Gran Sport front and rear derailleurs. I have Record and Nuovo Record items to trade. See photo.
Brent
Brent
05-20-20, 11:18 AM
#2491
Senior Member
Join Date: Jun 2009
Location: Brooklyn, NY
Posts: 547
Bikes: 1970s Coppi/Fiorelli beater, 1973 Raleigh Competition, 1972 Bob Jackson, 1970 Cilo Sprint-X, 1985 Fuji Touring Series IV, 1969 Legnano Roma
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 212 Post(s)
Liked 193 Times
in
127 Posts
WTT:
I have a 0.833/21.1mm quill stem, 120mm reach, "SR Forged" from 1977 in decent shape. will share pics if interested
Hoping to trade for similar reach, quality & condition, but in regular ol' 22.2mm...
I have a 0.833/21.1mm quill stem, 120mm reach, "SR Forged" from 1977 in decent shape. will share pics if interested
Hoping to trade for similar reach, quality & condition, but in regular ol' 22.2mm...
Likes For malcala622:
05-21-20, 02:29 AM
#2494
Member
I have a bunch of parts from some Peugeot projects:
All parts and fork from UO 8 mid 70s (Mafac brakes, wheels, etc.)
Parts from 1985 P8
Will trade for parts I can use on a future project
All parts and fork from UO 8 mid 70s (Mafac brakes, wheels, etc.)
Parts from 1985 P8
Will trade for parts I can use on a future project
05-21-20, 04:48 AM
#2495
Industry guy
What brand and vintage of spindle are you looking for?
Likes For 100bikes:
05-21-20, 10:21 AM
#2497
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,520
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1861 Post(s)
Liked 1,781 Times
in
1,010 Posts
Gardin stem for trade
I have this Gardin 100mm stem that came on a small Trek 715 I'm building for my daughter.
Looking for the missing Dia Compe NGC 500 rear brake calipers and GC non Aero levers, or Shimano 600 cranks in 170 length.
Pretty sure it is 26mm.
Looking for the missing Dia Compe NGC 500 rear brake calipers and GC non Aero levers, or Shimano 600 cranks in 170 length.
Pretty sure it is 26mm.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
05-21-20, 01:42 PM
#2498
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,409
Bikes: https://www.theheadbadge.com
Mentioned: 119 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 4,099 Times
in
2,015 Posts
ISO for a friend: An older Cannondale ST600 frame or frameset in 60cm to 62cm. He's pretty flexible about condition and it doesn't necessarily need the original fork.
-Kurt
-Kurt
__________________
05-21-20, 06:49 PM
#2499
Senior Member
Join Date: Feb 2020
Posts: 2,717
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 1029 Post(s)
Likes: 0
Liked 1,196 Times
in
711 Posts
Want campy pedal cap
Not a GS/NR/SR one, instead want the plastic 4-sided one, like this:
And if you have two, let me know; function first, form follows.
And if you have two, let me know; function first, form follows.
05-21-20, 11:24 PM
#2500
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,256
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1174 Post(s)
Liked 1,229 Times
in
681 Posts
ISO: Campagnolo BB spindle 70-115 for thick/rifled cups. Also need bearing set
FOUND
FOUND
__________________
2015 Bianchi Intenso
2015 Bianchi Intenso
Last edited by malcala622; 07-16-20 at 02:15 PM.
