Disk brake noise that baffles me
07-21-19, 05:50 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2007
Posts: 2,591
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 607 Post(s)
Liked 348 Times
in
223 Posts
Disk brake noise that baffles me
I know, it is hard to describe noises on the internet but I will try. I have XTR disk brakes and they work great. My problem is when I go down a hill fast, brake hard, I hear a repetitive pinging sound that goes away after about 30 seconds. It sounds like playing cards on the spokes.
First thing I did was tighten the center lock disk down, it was loose. No changes
Second thing, was have the spokes retensioned by one of our own here on BF. No changes.
Sorry about the wind noise but this is the sound on YouTube
Stan's Crest Carbon rims, White Industries CLD hubs, 12 mm through axle. Only happens on the front, not the rear. BTW this is a road bike.
Any thoughts?
First thing I did was tighten the center lock disk down, it was loose. No changes
Second thing, was have the spokes retensioned by one of our own here on BF. No changes.
Sorry about the wind noise but this is the sound on YouTube
Stan's Crest Carbon rims, White Industries CLD hubs, 12 mm through axle. Only happens on the front, not the rear. BTW this is a road bike.
Any thoughts?
Last edited by blakcloud; 07-21-19 at 06:10 PM. Reason: Added file
07-21-19, 07:40 PM
#2
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
Pull out your brake pads. Are they wearing evenly across the pad--or has a lip developed at the top?
07-22-19, 05:57 AM
#3
Full Member
Join Date: Sep 2017
Location: Maryland
Posts: 368
Bikes: Diamondback Haanjo Trail, Fuji Team Road
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 160 Post(s)
Liked 68 Times
in
46 Posts
I have a similar noise with my disc brakes if I brake hard and/or long on downhills. I think the disc warps from the heat, rubs on the pads causing the noise, and then return to their original shape (and the noise goes away) after they cool off.
07-22-19, 05:39 PM
#4
Senior Member
Thread Starter
Join Date: Aug 2007
Posts: 2,591
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 607 Post(s)
Liked 348 Times
in
223 Posts
Someone else suggested this to me yesterday so it might be the problem. Thanks for your insight.
07-23-19, 06:49 AM
#5
bike whisperer
Join Date: Dec 2009
Location: Melbourne, Oz
Posts: 9,517
Bikes: https://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=152015&p=1404231
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1513 Post(s)
Liked 707 Times
in
501 Posts
Yeah, the caliper alignment might look good enough on the stand, but add some warping, and hey presto. I'd try to ensure the gaps are as even as possible.
__________________
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
Sheldon Brown's bike info ~~~ Park Tools repair help
Half-step triple, using double gear ~~~ 6400 STI rebuild walkthrough ~~~ Want 8/9/10s @126mm OLD? OCR. ~~~ Shimano cassette body overhaul ~~~ Ergopower Escape wear repair ~~~ PSA: drivetrain wear
List of US/Canada bike co-ops ~~~ Global list
07-23-19, 07:13 AM
#6
Senior Member
Join Date: Jul 2018
Location: USA
Posts: 2,192
Bikes: Ti, Mn Cr Ni Mo Nb, Al, C
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 942 Post(s)
Liked 526 Times
in
349 Posts
A pinging sound? you sure it's not your spokes under stress and pinging from where they connect to the hub?
