How much air goes from the tire to the pump when you plug it on the valve?
#51
Senior Member
Join Date: Jul 2006
Location: Jacksonville, FL
Posts: 6,865
Bikes: Trek Domane SLR 7 AXS, Trek CheckPoint SL7 AXS, Trek Emonda ALR AXS, Trek FX 5 Sport
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 760 Post(s)
Liked 1,717 Times
in
1,003 Posts
I am trying to figure out how much air my tires lose between rides by using my floor pump's pressure gauge. I was always told it could be between 0 to 20PSI, but I have never verified.
The thing is that there is a loss of pressure inside the tire as soon as I connect the head on the valve (physics ) so the reading is not accurate. I am trying to figure out how much pressure is lost during the connection. Google wasn't helpful. Just in case, I know I can buy a gauge to read the pressure directly at the valve.
Has anyone ever wondered / found the answer or am I the only bored cyclist in the world who has time to think about these things? I know it will vary based on the length of the pump's air hose and surely a few other factors, but there should be a known average, right?
The thing is that there is a loss of pressure inside the tire as soon as I connect the head on the valve (physics ) so the reading is not accurate. I am trying to figure out how much pressure is lost during the connection. Google wasn't helpful. Just in case, I know I can buy a gauge to read the pressure directly at the valve.
Has anyone ever wondered / found the answer or am I the only bored cyclist in the world who has time to think about these things? I know it will vary based on the length of the pump's air hose and surely a few other factors, but there should be a known average, right?
Likes For eduskator:
Likes For Dean V:
#54
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,251
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8261 Post(s)
Liked 8,996 Times
in
4,455 Posts
I guess I have to drill out all of my bikes wheels and convert them to Schrader because the minutia of Presta valves is to complex for me to grasp. I'm not worthy.
Likes For big john:
#55
Senior Member
Join Date: Mar 2010
Location: Seattle, WA
Posts: 23,208
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 18883 Post(s)
Liked 10,646 Times
in
6,054 Posts
Likes For Seattle Forrest:
Likes For eduskator:
#58
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,251
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8261 Post(s)
Liked 8,996 Times
in
4,455 Posts
#59
Senior Member
Join Date: Sep 2015
Posts: 598
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 389 Post(s)
Liked 255 Times
in
165 Posts
Good idea. I worked for a trucking company, that for a while, transported helium. 40 foot trailer with about 20 long tanks on it. It weighed 5000 LESS when it was fully loaded.
#60
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,251
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8261 Post(s)
Liked 8,996 Times
in
4,455 Posts
#61
Senior Member
Join Date: May 2020
Posts: 490
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 252 Post(s)
Liked 67 Times
in
48 Posts
Thing is that if the attachment is depressing the valve stem, then you also loose some air pressure from the tire when you detach the hose or can lose a lot unless you really pull it off fast without any fumbling, not always easy to do.
Also, sticky valves is when you fill up at much longer intervals, like on bikes with bigger tires that run at lower pressures. I top up my 700x23s once a week but really should do that every three days or two if I was more picky.
Last edited by vane171; 04-20-21 at 09:30 AM.
#62
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,620
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,178 Times
in
769 Posts
Doesn't matter. That and the pressure gauge on the pump will never be the same as a hand pressure gauge because none of them are very accurate. What's more important is precision, not accuracy.
Pick one gauge and one pressure you like and stick with it.
#63
Senior Member
Thread Starter
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 582 Times
in
438 Posts
You should always push the pump hose attachment on the valve only partly, not all the way that it may go (that is, unless you the good pump as you pointed out). It is attached wrongly when the air escapes into the pump hose. When that happens to me (my pump is not of the good sort), I re-attach the hose, sometimes need to do that twice before it is seated properly. But I agree that some pumps are constructed better way to prevent that to happen. With those other ones, you need to have a good sense not to push the hose head on the valve too deeply.
Thing is that if the attachment is depressing the valve stem, then you also loose some air pressure from the tire when you detach the hose or can lose a lot unless you really pull it off fast without any fumbling, not always easy to do.
Also, sticky valves is when you fill up at much longer intervals, like on bikes with bigger tires that run at lower pressures. I top up my 700x23s once a week but really should do that every three days or two if I was more picky.
Thing is that if the attachment is depressing the valve stem, then you also loose some air pressure from the tire when you detach the hose or can lose a lot unless you really pull it off fast without any fumbling, not always easy to do.
Also, sticky valves is when you fill up at much longer intervals, like on bikes with bigger tires that run at lower pressures. I top up my 700x23s once a week but really should do that every three days or two if I was more picky.
Likes For eduskator:
#64
Administrator
Join Date: Apr 2005
Location: Hudson Valley, NY
Posts: 32,978
Bikes: Merlin Cyrene '04; Bridgestone RB-1 '92
Mentioned: 325 Post(s)
Tagged: 2 Thread(s)
Quoted: 11952 Post(s)
Liked 6,602 Times
in
3,466 Posts
That's typical forums for ya.
I love the guys who exclaim "This is not that interesting". Ok fine, you're not interested, you can leave without bothering to say anything.
I love the guys who exclaim "This is not that interesting". Ok fine, you're not interested, you can leave without bothering to say anything.
__________________
See, this is why we can't have nice things. - - smarkinson
Where else but the internet can a bunch of cyclists go and be the tough guy? - - jdon
#65
Senior Member
Thread Starter
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 582 Times
in
438 Posts
Makes me wonder if there should be a rule about not commenting on the form/manner, but rather on the substance.
Likes For eduskator:
#66
Senior Member
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,620
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2975 Post(s)
Liked 1,178 Times
in
769 Posts
I am always surprised when people ask such silly questions. Makes me wonder how they function and get through day to day life.
Of all the forums I'm a member on (I participate in some fishing, kayaking and car enthusiasts forums) this place takes the cake with the craziest comments and questions I've ever seen. One thing I've learned on this forum is that common sense isn't so common. I'm left scratching my head 70% of the time.
Of all the forums I'm a member on (I participate in some fishing, kayaking and car enthusiasts forums) this place takes the cake with the craziest comments and questions I've ever seen. One thing I've learned on this forum is that common sense isn't so common. I'm left scratching my head 70% of the time.
#67
Senior Member
Thread Starter
Join Date: Aug 2019
Location: Québec, Canada
Posts: 2,108
Bikes: SL8 Pro, TCR beater
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 981 Post(s)
Liked 582 Times
in
438 Posts
I am always surprised when people ask such silly questions. Makes me wonder how they function and get through day to day life.
Of all the forums I'm a member on (I participate in some fishing, kayaking and car enthusiasts forums) this place takes the cake with the craziest comments and questions I've ever seen. One thing I've learned on this forum is that common sense isn't so common. I'm left scratching my head 70% of the time.
Of all the forums I'm a member on (I participate in some fishing, kayaking and car enthusiasts forums) this place takes the cake with the craziest comments and questions I've ever seen. One thing I've learned on this forum is that common sense isn't so common. I'm left scratching my head 70% of the time.
#70
Senior Member
Join Date: Feb 2018
Posts: 567
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Liked 232 Times
in
153 Posts
#71
Senior Member
Join Date: Sep 2005
Location: In the foothills of Los Angeles County
Posts: 25,251
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 8261 Post(s)
Liked 8,996 Times
in
4,455 Posts
I get my N2 cartridges here: Redrock Minnesota
- Not for use with whip cream
Likes For big john:
#73
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,631
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4729 Post(s)
Liked 1,531 Times
in
1,002 Posts
Funny post. Get a gauge.
I inflate my tires, verify with gauge. All my floor pumps read differently vs the gauge. Specialized Air Tool, Lezyne steel, and the third, just got can't remember the model.
Lexzene always reads low so I inflate a bit more. Check with gauge. Checking with my gauge doesn't lose air vs attaching pumps. Though, if I am real careful and steady attaching, no air loss. Pull head straight off after inflation, just a hint of a hiss. No biggie.
I inflate my tires, verify with gauge. All my floor pumps read differently vs the gauge. Specialized Air Tool, Lezyne steel, and the third, just got can't remember the model.
Lexzene always reads low so I inflate a bit more. Check with gauge. Checking with my gauge doesn't lose air vs attaching pumps. Though, if I am real careful and steady attaching, no air loss. Pull head straight off after inflation, just a hint of a hiss. No biggie.
FYI, I think no matter how careful you are attaching your pump, you'll lose some air into at the least the pump's hose -- I think that's unavoidable, unless you're talking about a minipump that attaches right at the base of the pump and has no hose.
#74
Senior Member
Join Date: Feb 2018
Posts: 567
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 241 Post(s)
Liked 232 Times
in
153 Posts
#75
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,631
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4729 Post(s)
Liked 1,531 Times
in
1,002 Posts