Frame Identification
11-25-22, 05:12 AM
#1
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 467
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 324 Times
in
171 Posts
Frame Identification
Hiya Folks,
spotted an old frame on Ebay and I've got no idea what it is but it looks quite interesting.
https://www.ebay.co.uk/itm/374367117...Bk9SR7aF--aVYQ
It's frame number "0265" (on forks and BB) with "BR" under that on BB.
In my (limited) experience I've never seen a head tube like it:
And here's the BB
Anybody have an idea what it is ?
spotted an old frame on Ebay and I've got no idea what it is but it looks quite interesting.
https://www.ebay.co.uk/itm/374367117...Bk9SR7aF--aVYQ
It's frame number "0265" (on forks and BB) with "BR" under that on BB.
In my (limited) experience I've never seen a head tube like it:
And here's the BB
Anybody have an idea what it is ?
Likes For Aardwolf:
11-25-22, 06:45 AM
#2
Senior Member
Join Date: Jan 2016
Posts: 2,753
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 1,554 Times
in
899 Posts
I’m not too sure but it looks very similar to some Hetchins bikes I’ve seen. Someone with more knowledge should be able to help out. That is a very ornate looking frame.
11-25-22, 07:47 AM
#3
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 467
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 324 Times
in
171 Posts
Looking a Google images Hetchins lugs are even more ornate.
Another thing I spotted is the cable fittings at the top of the down tube.
Seems to be too high for a DT shifter, maybe it's for an internal gear rear hub with handlebar mounted changer ?
Another thing I spotted is the cable fittings at the top of the down tube.
Seems to be too high for a DT shifter, maybe it's for an internal gear rear hub with handlebar mounted changer ?
11-25-22, 08:22 AM
#4
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 10,591
Bikes: Yes, please.
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 2033 Post(s)
Liked 3,491 Times
in
1,443 Posts
Looks like the frame was built for bar end shifters. They were popular in late fifties and early sixties.
I'd be looking for a former (British?) pro with the initials BR, who liked bar end shifters and was active in the 1965 season.
I'd be looking for a former (British?) pro with the initials BR, who liked bar end shifters and was active in the 1965 season.
Likes For non-fixie:
11-25-22, 09:04 AM
#5
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 12,998
Mentioned: 376 Post(s)
Tagged: 1 Thread(s)
Quoted: 3293 Post(s)
Liked 2,246 Times
in
1,560 Posts
-----
certainly appears British from somewhere between the mid nineteensixties and very early nineteen seventies
one house which did bespokes such as this was Condor
-----
certainly appears British from somewhere between the mid nineteensixties and very early nineteen seventies
one house which did bespokes such as this was Condor
-----
11-25-22, 09:56 AM
#6
Wheelman
Thread Starter
Join Date: Aug 2021
Location: Putney, London UK
Posts: 467
Bikes: 1982 Holdsworth Avanti (531), 1961 Holdsworth Cyclone
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 156 Post(s)
Liked 324 Times
in
171 Posts
It's not a 'standard' Condor I think, could be bespoke though.
I almost bought a 1960 Condor No 1 on Wednesday (outbid in last 10 secs)
https://www.ebay.co.uk/itm/Vintage-C...p2047675.l2557
I almost bought a 1960 Condor No 1 on Wednesday (outbid in last 10 secs)
https://www.ebay.co.uk/itm/Vintage-C...p2047675.l2557
11-25-22, 10:48 AM
#7
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 12,998
Mentioned: 376 Post(s)
Tagged: 1 Thread(s)
Quoted: 3293 Post(s)
Liked 2,246 Times
in
1,560 Posts
It's not a 'standard' Condor I think, could be bespoke though.
I almost bought a 1960 Condor No 1 on Wednesday (outbid in last 10 secs)
https://www.ebay.co.uk/itm/Vintage-C...p2047675.l2557
I almost bought a 1960 Condor No 1 on Wednesday (outbid in last 10 secs)
https://www.ebay.co.uk/itm/Vintage-C...p2047675.l2557
the only reason mentioned Condor was that they did do bespoke
BICYCLING! magazine did a feature on them BITD and they showed one done for a rock musician decorated with musical notes and instruments
they showed another done for a history professor which had a Battle of Hastings 1066 theme
no wish to assert an identity...mentioned only as a possibility
---
lug manufacturers offered blanks so that framebuilders could design and cut their own patterns
in the case of a hand-cut pattern it is possible it might be a "one-off" with no other like it in existence...or it could be a design used by a framebuilder to produce a number of frames...
-----
Last edited by juvela; 11-25-22 at 11:14 AM. Reason: addition
Likes For juvela:
11-25-22, 12:45 PM
#8
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,467
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 1231 Post(s)
Liked 766 Times
in
594 Posts
headlugs bear some similarity to Gillott "Fleur de Lis" model but also differences, and you'd expect the forkcrown to be equally "fancy" and not this bog-plain Davis or Haden "Cinelli style".
So likely made as an homage to the Fleur de Lis by a custom (bespoke) builder.
If "BR" are owner's initials then that's going to be a real scavenger hunt, but if they are the builder's then might be a little easier...but maybe not.
Here's one pretty bad clue: "...named after Gillott worker Ron Brown"
So likely made as an homage to the Fleur de Lis by a custom (bespoke) builder.
If "BR" are owner's initials then that's going to be a real scavenger hunt, but if they are the builder's then might be a little easier...but maybe not.
Here's one pretty bad clue: "...named after Gillott worker Ron Brown"
Last edited by unworthy1; 11-26-22 at 01:09 PM.
11-25-22, 03:24 PM
#9
Full Member
Join Date: Mar 2004
Location: Glendora, CA
Posts: 258
Bikes: Merlin Extralight '94 & Cannondale Supersix '15
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 157 Post(s)
Liked 192 Times
in
108 Posts
This build would make a fun project. Go for it!
That "hit" to the drive-side bottom bracket shell looks troublesome to me.
Especially since the seller did not provide a proper photo.
One must wonder why it got sand or bead blasted, only to let the surface rust return.
At least take a few minutes to hit it with some rattle can primer!
So it will require another bead blast. (It probably got sand-blasted, judging by some metal removal.)
That "hit" to the drive-side bottom bracket shell looks troublesome to me.
Especially since the seller did not provide a proper photo.
One must wonder why it got sand or bead blasted, only to let the surface rust return.
At least take a few minutes to hit it with some rattle can primer!
So it will require another bead blast. (It probably got sand-blasted, judging by some metal removal.)
11-25-22, 03:30 PM
#10
Senior Member
Join Date: Jun 2006
Posts: 18,420
Mentioned: 122 Post(s)
Tagged: 0 Thread(s)
Quoted: 2772 Post(s)
Liked 1,848 Times
in
1,348 Posts
This is a find that one shares AFTER it is bought and in hand.
Likes For repechage:
11-25-22, 03:31 PM
#11
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 12,453
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 245 Post(s)
Tagged: 0 Thread(s)
Quoted: 3920 Post(s)
Liked 4,830 Times
in
2,838 Posts
This build would make a fun project. Go for it!
That "hit" to the drive-side bottom bracket shell looks troublesome to me.
Especially since the seller did not provide a proper photo.
One must wonder why it got sand or bead blasted, only to let the surface rust return.
At least take a few minutes to hit it with some rattle can primer!
So it will require another bead blast. (It probably got sand-blasted, judging by some metal removal.)
That "hit" to the drive-side bottom bracket shell looks troublesome to me.
Especially since the seller did not provide a proper photo.
One must wonder why it got sand or bead blasted, only to let the surface rust return.
At least take a few minutes to hit it with some rattle can primer!
So it will require another bead blast. (It probably got sand-blasted, judging by some metal removal.)
Can't imagine that being life threatening in any way.
11-25-22, 04:59 PM
#12
Senior Member
Join Date: Aug 2017
Location: Germany
Posts: 1,030
Bikes: 80s Alan Super Record, 79' Somec Special, 90s Rossin(?) Columbus Ego Triathlon, previously: Bianchi SBX Reparto Corse (stolen) and so on...
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 362 Post(s)
Liked 751 Times
in
577 Posts
Bill Hurlow (who built for Condor) comes to my mind, but no 100% match... worth googling more
Hurlow Main
- Lattz
Hurlow Main
- Lattz
11-26-22, 01:20 PM
#13
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,467
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 1231 Post(s)
Liked 766 Times
in
594 Posts
Bill Hurlow popped to mind for me, too, but I decided there was not enough in the OP's example to make it a good match. Hurlow certainly did use a plain full-sloping crown along with very ornate lugs, and some had no headbadge holes (used head decals instead) but...the extremely high quality he generally exhibited is not present in these lugs, IMO.
Of course he built for so many others as contractor, (Holdsworth Shop, Freddie Grubb, Claud Butler, Mal Rees, and Condor) I'm sure he made plenty that were not the gleaming jewels he built under his own brand.
But I wonder if "RB" could have been an apprentice to him, in one of those contact shop deals?
Of course he built for so many others as contractor, (Holdsworth Shop, Freddie Grubb, Claud Butler, Mal Rees, and Condor) I'm sure he made plenty that were not the gleaming jewels he built under his own brand.
But I wonder if "RB" could have been an apprentice to him, in one of those contact shop deals?
