Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Vintage Touring Groups

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Vintage Touring Groups

Old 08-06-13, 05:27 AM
  #1  
cs1
Senior Member
Thread Starter
 
cs1's Avatar
 
Join Date: Feb 2004
Location: Clev Oh
Posts: 7,091

Bikes: Specialized, Schwinn

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 24 Times in 22 Posts
Vintage Touring Groups

If your were going to put together a vintage touring group what would you use? By vintage I mean friction shifting and threaded freewheels. That should include many now deceased parts other than your typical Campy and Shimano. Personally, I've got a nice set of Campy Record hubs laced to some Mavic CXP30 rims and an old TA/Mafac/Suntour group from about 1982.
cs1 is offline  
Old 08-06-13, 05:44 AM
  #2  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
I've ridden SunTour Cyclone Mark II. Nice looking and light weight. The shifting for 3x7 was very good.

There was a recent thread about vintage touring derailleurs. The Deore XT "stag's head" has fans. I had a nice set, but sold them without having tried them in a build. Looking back, that was a shame.
Phil_gretz is offline  
Old 08-06-13, 07:09 AM
  #3  
oddjob2
Still learning
 
oddjob2's Avatar
 
Join Date: May 2012
Location: North of Canada, Adirondacks
Posts: 11,620

Bikes: Still a garage full

Mentioned: 92 Post(s)
Tagged: 2 Thread(s)
Quoted: 847 Post(s)
Liked 66 Times in 44 Posts
Suntour Cyclone GT II works great on my recently acquired Super Sport.
Also, consistantly smooth shifting on Huret Rival on my PGN10.

Both were OEM on the respective bikes.
oddjob2 is offline  
Old 08-06-13, 08:17 AM
  #4  
The Golden Boy 
Extraordinary Magnitude
 
The Golden Boy's Avatar
 
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,640

Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT

Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2597 Post(s)
Liked 1,678 Times in 926 Posts
I'm kind of building this right now with my Voyageur.

My wheels are 36h Avocet hubs on Wolber Super Champion rims and a Suntour (something like) 14-34 Freewheel. Crank is a Takagi Tourney XT 48-38-28. Pedals are Union beartrap clones- need some Cristophe toe clips. Bars and stem are 3TTT- if those are too new, I'd like to get an SR stem and SR "Randnner" bars. The brake levers are the slotted Superbe (with Mirrycle Mirror) and if I had the brakes I wanted, they'd be the Shimano MC-70. I really like the Sachs/Huret ratcheting downtube shifters they feel so nice and smooth- and they're not very common. Since we're talking friction era... I can't use what's on the Voyageur now... so I'll go with a Suntour VGT Luxe rear (because I've never used one, but they seem to be well loved) and a Suntour AG Tech in the front. Saddle- I really like the San Marco touring, but it doesn't have bag loops on it (for some reason), so I might go for the Avocet Touring II.

If I could find a source for a new version of these Specialized Expedition tires... I've got 1 1/4 in the front and 1 3/8 in the back. They're fantastic. But they're 30 years old...

__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*

Commence to jigglin’ huh?!?!

"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
The Golden Boy is offline  
Old 08-06-13, 03:10 PM
  #5  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,725

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2912 Post(s)
Liked 2,837 Times in 1,461 Posts
What era? '80s? '60s?
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Old 08-06-13, 03:18 PM
  #6  
jimmuller 
What??? Only 2 wheels?
 
jimmuller's Avatar
 
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,452

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times in 232 Posts
If vintage means anything from the 80's or earlier, I'd go with a VGT Luxe RD, a 14-32 or 14-34 freewheel, either 5 or 6, and a compact double, like 48-34. That's about what I'd put on a road bike anyway, except pairing a 14-28 freewheel to those chainrings.

Of course it also depends on the terrain. Are you crossing New England or Illinois?
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Old 08-06-13, 03:42 PM
  #7  
Cougrrcj
Senior Member
 
Cougrrcj's Avatar
 
Join Date: Jul 2011
Location: NE Ohio
Posts: 3,891

Bikes: A few...

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 620 Post(s)
Liked 370 Times in 256 Posts
My '75 Fuji was originally a 10-speed (2x5) with the ubiquitous SunTour 14-28 out back and Sugino Maxy 51/39 crainrings. Over the years it has turned into an 18-spd (3x6). The crankset now is a Sakae SX 48/38/28 and it now wears a 13-26 6-spd Suntour Winner Ultra freewheel (just took off the 13-21 Ultra). Derailleurs are currently SunTour Compe-V front and a long cage MD(?) MTB rear (bought when my VGT-Luxe ate a pulley several years ago)... Never had a problem shifting at all. No really steep hills around here so the 28/26 is kinda overkill, but I want to try some loaded touring in the OH/PA/WV region.
Cougrrcj is offline  
Old 08-06-13, 03:57 PM
  #8  
jimmuller 
What??? Only 2 wheels?
 
jimmuller's Avatar
 
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,452

Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10

Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times in 232 Posts
Originally Posted by Cougrrcj
...but I want to try some loaded touring in the OH/PA/WV region.
You may want to swap that 13-26 for a 14-28 or bigger! WV has got to be the biggest state in the Union when you flatten it out! OH and PA aren't far behind.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
jimmuller is offline  
Old 08-06-13, 04:17 PM
  #9  
Cougrrcj
Senior Member
 
Cougrrcj's Avatar
 
Join Date: Jul 2011
Location: NE Ohio
Posts: 3,891

Bikes: A few...

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 620 Post(s)
Liked 370 Times in 256 Posts
If I was traveling other areas - say through WV - yes I'd gear myself a bit differently.

My plan is to ride the perimeter of the state of Ohio - so the only hilly sections would be along the OH/PA line from Lake Erie to the Ohio River, and from the Ohio River valley in Cincy up to the Dayton area. Everthing else is flat-flat-flat! Flat along the Lake Erie shoreline, flat following the Ohio River from East Liverpool all the way to Cincy, and flat from Dayton on north along the OH/IN border.

Another of my 'bucket rides' is the GAP and C&O from Pittsburgh to D.C., but that is also following railbeds for the most part - flat again!

"A man has got to know his limitations!"
Cougrrcj is offline  
Old 08-06-13, 06:37 PM
  #10  
cs1
Senior Member
Thread Starter
 
cs1's Avatar
 
Join Date: Feb 2004
Location: Clev Oh
Posts: 7,091

Bikes: Specialized, Schwinn

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 225 Post(s)
Liked 24 Times in 22 Posts
Originally Posted by Bianchigirll
What era? '80s? '60s?
I'm thinking 80's. I've used Suntour and Shimano Deerhead on some of my vintage MTBs and they work great. As far as brakes, hubs and the rest of the group that's up in the air. If it came off of an 80's MTB then I probably have it in my parts box.
cs1 is offline  
Old 08-06-13, 07:27 PM
  #11  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Vintage Touring Groups

I'd go Huret derailleurs, Mafac brakes, TA triple, Maillard hubs, Berthet pedals, Ideale 92, ... Not per se a group, but all classic!
Road Fan is offline  
Old 08-06-13, 09:21 PM
  #12  
Velognome 
Get off my lawn!
 
Velognome's Avatar
 
Join Date: Nov 2010
Location: The Garden State
Posts: 6,253

Bikes: 1917 Loomis, 1923 Rudge, 1930 Hercules Renown, 1947 Mclean, 1948 JA Holland, 1955 Hetchins, 1957 Carlton Flyer, 1962 Raleigh Sport, 1978&81 Raleigh Gomp GS', 2010 Raliegh Clubman

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 93 Post(s)
Likes: 0
Liked 98 Times in 48 Posts
How about a Shimano Arabesque Group with a long cage RD ?
Velognome is offline  
Old 08-06-13, 09:35 PM
  #13  
Standalone 
The Drive Side is Within
 
Standalone's Avatar
 
Join Date: Dec 2007
Location: New Haven, CT, USA
Posts: 3,398

Bikes: Road, Cargo, Tandem, Etc.

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 120 Post(s)
Liked 42 Times in 27 Posts
I dunno, but it would probably have half step + granny gearing. I got to really liking that on my Alyeska touring in fairly flat Connecticut and Massachusetts.
__________________
The bicycle, the bicycle surely, should always be the vehicle of novelists and poets. Christopher Morley
Standalone is offline  
Old 08-07-13, 06:26 AM
  #14  
djkashuba 
Senior Member
 
djkashuba's Avatar
 
Join Date: Aug 2010
Location: Monte Rio CA
Posts: 1,129

Bikes: Motobecane Le Champion, Raleigh International, Bertin, Raleigh DL-1 1980, Colnago Super,Follis, Bianchi Competizione, Brompton M6L, Black Mountain Monstercros

Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 125 Post(s)
Liked 839 Times in 151 Posts

Specialized Expedition by djk762, on Flickr

Just replaced the original Mountech on this Expedition with V-GT Lux controlled by Riv Silvers on the bar ends. Very nice.

-D
djkashuba is offline  
Old 08-08-13, 11:19 PM
  #15  
balindamood
Wrench Savant
 
balindamood's Avatar
 
Join Date: Mar 2006
Location: 61 Degrees North
Posts: 2,306

Bikes: Yes

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 93 Times in 38 Posts
It may be a bit late, but I thought I would add that the Shimano Deore DX group ('89-92, I think) is probably one of the best values out there. 95% of Deore XT, and most people won't even give it s 2nd-look. I have it on My daily commuter, a touring bike, my wife's touring bike, and the kid-hauling tandem and the stuff just works great.
balindamood is offline  
Old 08-08-13, 11:37 PM
  #16  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
I'm building up a vintage touring bike. I'm using campy tipo hubs laced onto mavic ma-2 rims and cyclone long reach brakes. I haven't decided on the derailleurs yet but I may end up going with deore xt. The crank will either be a suntour triple or a deore xt. I took a few pics of the bike (a custom Melton touring bike) before tearing it down for this build:

Attached Images
File Type: jpg
P1010147.jpg (101.7 KB, 149 views)
bikemig is offline  
Old 08-09-13, 12:53 AM
  #17  
cyclotoine
Senior Member
 
cyclotoine's Avatar
 
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,775
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times in 14 Posts
If you search this forum you will find that I attach 600 again and again and again. I hate the stamped parallelogram plates and the blatant flop of an attempt to appeal to the cache of nuovo record. It's also a straight parallogram so for touring the performance is not competitive with suntour.

I agree with the sentiment that shimano SIS 7/8 speed are the best touring derailleurs out there, but they are not as vintage. The XT 739 (8 speed) rear derailleur has to be the single best touring derailleur because it is robust, works beautiful, is compatible with new 8speed shimano bar-cons and cheep shimano HG 8 speed chains and cassettes work perfectly with it. It is ubiquitous enough to be okay for a touring bike (m900 I would have a hard time using on a touring bike)... and my favorite you can rob a lightweight upper pivot bolt from a broken down 9 speed XT, XTR, ultegra, dura-ace and later slx derailleurs and replace the heavy solid original one to save a few grams....
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
cyclotoine is offline  
Old 08-09-13, 01:13 AM
  #18  
Sixty Fiver
Bicycle Repair Man !!!
 
Sixty Fiver's Avatar
 
Join Date: Sep 2007
Location: YEG
Posts: 27,272

Bikes: See my sig...

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 128 Times in 95 Posts
Originally Posted by balindamood
It may be a bit late, but I thought I would add that the Shimano Deore DX group ('89-92, I think) is probably one of the best values out there. 95% of Deore XT, and most people won't even give it s 2nd-look. I have it on My daily commuter, a touring bike, my wife's touring bike, and the kid-hauling tandem and the stuff just works great.
The DX group is beautiful... and works brilliantly.
Sixty Fiver is offline  
Old 08-09-13, 01:19 AM
  #19  
Sixty Fiver
Bicycle Repair Man !!!
 
Sixty Fiver's Avatar
 
Join Date: Sep 2007
Location: YEG
Posts: 27,272

Bikes: See my sig...

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 128 Times in 95 Posts
Originally Posted by cyclotoine
If you search this forum you will find that I attach 600 again and again and again. I hate the stamped parallelogram plates and the blatant flop of an attempt to appeal to the cache of nuovo record. It's also a straight parallogram so for touring the performance is not competitive with suntour.
I love the 600 Arabesque group and all of it's respective components except the rear derailleur... the springs are weak and wear prematurely and it is primitive compared to the Suntour derailleurs that it was supposed to have been competing against.

There is no comparison between a V series Suntour and the 600 Arabesque when it comes to design, build quality, and shifting proficiency.

Mind you, no-one else made a friction derailleur as well as Suntour and once they sorted out their indexing issues their groups were every but as good as Shimano but it was already too late as they failed to outsource production and their production costs rendered them non competitive in the OEM market.
Sixty Fiver is offline  
Old 08-09-13, 01:48 AM
  #20  
cyclotoine
Senior Member
 
cyclotoine's Avatar
 
Join Date: Jul 2004
Location: Yukon, Canada
Posts: 8,775
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 113 Post(s)
Likes: 0
Liked 16 Times in 14 Posts
Originally Posted by Sixty Fiver
I love the 600 Arabesque group and all of it's respective components except the rear derailleur... the springs are weak and wear prematurely and it is primitive compared to the Suntour derailleurs that it was supposed to have been competing against.

There is no comparison between a V series Suntour and the 600 Arabesque when it comes to design, build quality, and shifting proficiency.

Mind you, no-one else made a friction derailleur as well as Suntour and once they sorted out their indexing issues their groups were every but as good as Shimano but it was already too late as they failed to outsource production and their production costs rendered them non competitive in the OEM market.
I never really liked the 600 brakes either. The levers were barely a step up from the ubiquitous dia-compe of the early 70s and the caliper arms were flimsy especially compared to most of the dia-compe offerings at the time. For a second tier group the brakes were also behind the competitors in my opinion.
__________________
1 Super Record bike, 1 Nuovo Record bike, 1 Pista, 1 Road, 1 Cyclocross/Allrounder, 1 MTB, 1 Touring, 1 Fixed gear
cyclotoine is offline  
Old 08-09-13, 09:52 AM
  #21  
cooperryder
Senior Member
 
cooperryder's Avatar
 
Join Date: Oct 2006
Location: Dallas / Ft Worth
Posts: 1,152
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 211 Post(s)
Liked 1,402 Times in 399 Posts
Originally Posted by djkashuba

Specialized Expedition by djk762, on Flickr

Just replaced the original Mountech on this Expedition with V-GT Lux controlled by Riv Silvers on the bar ends. Very nice.

-D
That is a terrific looking Expedition,
from a former 83 Expedition owner.
cooperryder is offline  
Old 08-09-13, 11:08 AM
  #22  
Sixty Fiver
Bicycle Repair Man !!!
 
Sixty Fiver's Avatar
 
Join Date: Sep 2007
Location: YEG
Posts: 27,272

Bikes: See my sig...

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 128 Times in 95 Posts
Originally Posted by cyclotoine
I never really liked the 600 brakes either. The levers were barely a step up from the ubiquitous dia-compe of the early 70s and the caliper arms were flimsy especially compared to most of the dia-compe offerings at the time. For a second tier group the brakes were also behind the competitors in my opinion.
My mileage may vary as a fairly lightweight rider... always found that the 600 brakes stopped me well enough.

Sixty Fiver is offline  
Old 08-09-13, 11:29 AM
  #23  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
The Rolling Stones came to mind when I read the thread title.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 08-09-13, 12:19 PM
  #24  
Sixty Fiver
Bicycle Repair Man !!!
 
Sixty Fiver's Avatar
 
Join Date: Sep 2007
Location: YEG
Posts: 27,272

Bikes: See my sig...

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 128 Times in 95 Posts
Just finished working on my Cascade... pulled the SRAM X5 and opted to reinstall the Cyclone GT as the Vx I have needs a little love before it goes back on anything.

That old Cyclone is still crisp as chips and changes gears like it is indexed.
Sixty Fiver is offline  
Old 08-09-13, 01:35 PM
  #25  
sykerocker 
Senior Member
 
sykerocker's Avatar
 
Join Date: Dec 2005
Location: Ashland, VA
Posts: 4,420

Bikes: The keepers: 1958 Raleigh Lenton Grand Prix, 1968 Ranger, 1969 Magneet Sprint, 1971 Gitane Tour de France, 1973 Raleigh Tourist, 3 - 1986 Rossins, and a '77 PX-10 frame in process.

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 237 Times in 129 Posts
My tourer is a 1969 Magneet Sprint:



Derailleurs are the old, early 70's Sun Tour combination: V-GT and Compe-V front with the rachet handlebar shifters. Yeah, they're a little heavier than some of the suggestions already made as they're entirely steel. However, that rear is strong enough to pound tent pegs, and on a loaded touring bike weight doesn't mean ****, reliability is everything. The crank is a Stronglight 99 triple, which I really love. About the only thing I'd warn you against is the Weinmann centerpulls. They're ok, but you can do better under load.

You're going to find that there's a rather strong school of thought that nobody has ever made a better touring derailleur than Sun Tour. I have a difficult time disagreeing with that sentiment.
__________________
Syke

“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”

H.L. Mencken, (1926)

sykerocker is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.