Brakes for Raleigh Wyoming
#1
Count Orlok Member
Thread Starter
Brakes for Raleigh Wyoming
I have been slowly upgrading my Raleigh Wyoming:
I recently built up a 700C wheelset. The Dia-Compe 500 sidepulls do have enough reach, but I would like to upgrade. I need about 57mm reach, but I have racks and fenders:
(sorry about the upside down cell pics)
I found a used set of Tektro 539s; they had the reach but didn't clear the fenders on the top and sides. Would Tektro 559s fit? I can't seem to find dimensions. Other recommendations? Or should I throw Kool-Stop pads in my Dia-Compes and call it good?
I recently built up a 700C wheelset. The Dia-Compe 500 sidepulls do have enough reach, but I would like to upgrade. I need about 57mm reach, but I have racks and fenders:
(sorry about the upside down cell pics)
I found a used set of Tektro 539s; they had the reach but didn't clear the fenders on the top and sides. Would Tektro 559s fit? I can't seem to find dimensions. Other recommendations? Or should I throw Kool-Stop pads in my Dia-Compes and call it good?
Last edited by gna; 06-27-19 at 09:03 PM.
#2
Senior Member
Join Date: Sep 2015
Location: Madison, WI
Posts: 2,701
Mentioned: 52 Post(s)
Tagged: 0 Thread(s)
Quoted: 1136 Post(s)
Liked 650 Times
in
336 Posts
I would go with centerpulls. New Dia Compe 610s are fantastic. The forged or CNCed ones are both good. Plenty of power and more fender room than Sidepulls.
It looks like you're using old pads also. Some new salmon Kool Stops will work well. By the way I believe your pad holders are backwards.
It looks like you're using old pads also. Some new salmon Kool Stops will work well. By the way I believe your pad holders are backwards.
#3
Count Orlok Member
Thread Starter
I would go with centerpulls. New Dia Compe 610s are fantastic. The forged or CNCed ones are both good. Plenty of power and more fender room than Sidepulls.
It looks like you're using old pads also. Some new salmon Kool Stops will work well. By the way I believe your pad holders are backwards.
It looks like you're using old pads also. Some new salmon Kool Stops will work well. By the way I believe your pad holders are backwards.
#4
Senior Member
Killa-bike! Looks like the centerpull option might not be do-able with those rack brackets. Not too familiar with the Tectros. New pads for now and more time to look would be my opinion.