Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

Panaracer pro-tites in 27"

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

Panaracer pro-tites in 27"

Old 04-07-23, 06:17 PM
  #1  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Panaracer pro-tites in 27"

Got a set of these in the mail today cheap from a retailer called "Bikesmith". After getting three flats in the last few months with "Bell" brand tires I decided to get something with flat protection. The Panaracer protite model is supposed to have something in it to help prevent flats so we will give them a try. Threw them on the "LeToaster" today;





beng1 is offline  
Likes For beng1:
Old 04-08-23, 04:09 PM
  #2  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,866

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1854 Post(s)
Liked 661 Times in 504 Posts
Congrats! Baby has some grownup shoes!
Road Fan is offline  
Old 04-09-23, 11:39 AM
  #3  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,627

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times in 1,577 Posts
Looks sharp! Just be careful not to scrape the sidewalls on anything.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Old 04-09-23, 02:56 PM
  #4  
alcjphil
Senior Member
 
alcjphil's Avatar
 
Join Date: Jun 2002
Location: Montreal, Quebec
Posts: 5,921
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1814 Post(s)
Liked 1,693 Times in 974 Posts
I have a set of their predecessor, Pasela Tourguards on my touring bike. Only puncture I have had was a pinch flat jumping up on a curb too fast.
alcjphil is offline  
Old 04-09-23, 04:29 PM
  #5  
bike_tom
Full Member
 
bike_tom's Avatar
 
Join Date: Feb 2018
Location: Arlington, MA
Posts: 289

Bikes: 2022 Trek Checkpoint ALR5, 2014 Cannondale Trail SL1, 1983 Fuji Royale II

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 144 Post(s)
Liked 583 Times in 239 Posts
I have the folding version of these in 27 x 1 on my Fuji. I haven't had a puncture in 1500 miles.
(I do ride mostly on dedicated bike paths, so not as much debris as street riding.)
bike_tom is offline  
Likes For bike_tom:
Old 04-10-23, 07:37 AM
  #6  
ClydeClydeson
Senior Member
 
Join Date: Mar 2019
Posts: 1,606
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 581 Post(s)
Liked 921 Times in 518 Posts
Those are the best tires IMO
ClydeClydeson is offline  
Likes For ClydeClydeson:
Old 04-10-23, 06:53 PM
  #7  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Well I have been riding them around town and not treating them with kid-gloves at all, taking shortcuts where lots of glass and other debris is surely piled up, through parts of town that are largely ignored as far as maintenance and cleaning etc.. So far so good, but since I have ridden many months on Kenda and Cheng-chin tires without getting any flats, they will have a long way to go without flatting before I am impressed with them.
beng1 is offline  
Old 04-12-23, 12:52 PM
  #8  
SurferRosa
señor miembro
 
SurferRosa's Avatar
 
Join Date: Dec 2018
Location: Pac NW
Posts: 6,600

Bikes: '70s - '80s Campagnolo

Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3865 Post(s)
Liked 6,450 Times in 3,190 Posts
Tire labels should be centered over the valve stem.
SurferRosa is offline  
Old 04-13-23, 12:42 PM
  #9  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,866

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1854 Post(s)
Liked 661 Times in 504 Posts
Originally Posted by SurferRosa
Tire labels should be centered over the valve stem.
I'm worried that might mess up his flat protection - Lol!

I have a set of those Paselas on my Rudge club-style bike, waiting for the rest of the refurbishment to get finished.
Road Fan is offline  
Old 04-13-23, 12:46 PM
  #10  
denaffen
Full Member
 
Join Date: Dec 2020
Posts: 288

Bikes: Bianchi Nyala, Bianchi Volpe, Bianchi Campione D'Italia, Trek 640, Luxus folding bike, Schwinn Speedster, Bianchi Torino, KHS Aero Sport, probably something else around here somewhere

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 198 Times in 100 Posts
Paselas are great tires. About the best I’ve found for 27”. There’s no comparing them to cheap Kenda or Cheng Shins.
denaffen is offline  
Old 04-13-23, 03:15 PM
  #11  
denaffen
Full Member
 
Join Date: Dec 2020
Posts: 288

Bikes: Bianchi Nyala, Bianchi Volpe, Bianchi Campione D'Italia, Trek 640, Luxus folding bike, Schwinn Speedster, Bianchi Torino, KHS Aero Sport, probably something else around here somewhere

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 198 Times in 100 Posts
Originally Posted by jeanetonthebike
Kenda and Cheng-chin are both popular tire brands, but from what I see, you're like still waiting to be truly impressed. Have you tried any other tire brands that have stood up to the debris and rough patches in your town? I'm always on the lookout for reliable tires that can handle some abuse, so I'd love to hear your or any others' thoughts on other options...
Kenda and Cheng Shin are popular because they’re cheap, readily available and people don’t know better. They do not even begin to compare with Pasela ride quality.

if you really want tires you can abuse, you can’t go wrong with Schwalbe Marathons. They’re heavy and I prefer Paselas, but Marathons could be shot out of a cannon into the sun without flatting.
denaffen is offline  
Old 04-13-23, 08:18 PM
  #12  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Originally Posted by jeanetonthebike
Kenda and Cheng-chin are both popular tire brands, but from what I see, you're like still waiting to be truly impressed. Have you tried any other tire brands that have stood up to the debris and rough patches in your town? I'm always on the lookout for reliable tires that can handle some abuse, so I'd love to hear your or any others' thoughts on other options...
It takes hundreds or actually thousands of miles to be impressed. I put 2000 miles on a set of Kenda's in 2022 and got one flat, it was the front and I had run a thumb-tack over that hit the tire dead-center. I would have made it home but I screwed up and pulled the tack out. It was not leaking, just making a tapping noise as I went down the street. Then I tried to put the tack back in the hole and made two holes. I don't care how much the tire costs, if I can run around a city over and through all sorts of terrain for nine or ten months and only get one flat they are good in my book. They are Kenda K-35s and they are the ones I used in the TT last July that let me go 19.5mph on the Huffy, so they are fast too.
beng1 is offline  
Old 04-14-23, 09:02 PM
  #13  
greatscott
Senior Member
 
Join Date: Feb 2019
Location: Indiana
Posts: 592

Bikes: 1984 Fuji Club, Suntour ARX; 2013 Lynskey Peloton, mostly 105 with Ultegra rear derailleur, Enve 2.0 fork; 2020 Masi Giramondo 700c, full Deore with TRP dual piston mech disk brakes

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 324 Post(s)
Liked 81 Times in 71 Posts
My experience with Kenda k35 was that they sucked. I put them on my grandson's bike, and he got about 15 flats, and the tire wore out after about 1,200 miles. Never tried the Cheng Shin, nor do I want to! So I got him a set of Panaracer wire beaded Pasela Tourguide tires a while back, and no flats, they have about 1,000 miles on them and they still look newish, probably good for another 3,000 miles. The only problem with the Pasela is on wet pavement, they tend to be a bit slick until you get about 500 miles on them, even after that they're are better tires for the rain, just something to be aware of, not sure if the new version ProTite is better in that respect, even if they are a bit slick, the price plus flat protection plus long miles is worth the price.
greatscott is offline  
Old 04-15-23, 08:26 AM
  #14  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Did 84 miles on the ProTites this week over a lot of glass and gravel and debris and no problems.
beng1 is offline  
Likes For beng1:
Old 04-15-23, 10:44 AM
  #15  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,627

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times in 1,577 Posts
Originally Posted by jeanetonthebike
I'm really shocked to read bad reviews about Kenda((
Like any tire company, Kenda manufacturers a variety of tires at different price points. A lot of the unflattering reviews for Kenda tires come from people comparing a cheap Kenda tire to a much higher-fancier tire from another brand. You generally get what you pay for.

I got a ridiculous number of miles from a pair of Kenda Kwicks a while back, and would definitely buy more tires from the brand if the specs were right.
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Likes For ThermionicScott:
Old 04-17-23, 06:51 AM
  #16  
denaffen
Full Member
 
Join Date: Dec 2020
Posts: 288

Bikes: Bianchi Nyala, Bianchi Volpe, Bianchi Campione D'Italia, Trek 640, Luxus folding bike, Schwinn Speedster, Bianchi Torino, KHS Aero Sport, probably something else around here somewhere

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 117 Post(s)
Liked 198 Times in 100 Posts
ThermionicScott is right, Kenda does make some good tires, and I shouldn't paint all Kendas with such a wide brush. They're best known, however, for tires that are cheap and readily available at Walmart and the like. Those are not the good ones.
denaffen is offline  
Old 04-18-23, 03:55 PM
  #17  
Litho dbh
El Rayo X
 
Join Date: Dec 2020
Location: Portland Oregon
Posts: 31
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 36 Times in 15 Posts
Originally Posted by beng1
Got a set of these in the mail today cheap from a retailer called "Bikesmith". After getting three flats in the last few months with "Bell" brand tires I decided to get something with flat protection. The Panaracer protite model is supposed to have something in it to help prevent flats so we will give them a try. Threw them on the "LeToaster" today;





Tell me about the saddle and post. That looks odd..
Litho dbh is offline  
Old 04-18-23, 07:39 PM
  #18  
Dman1234
Newbie
 
Join Date: Aug 2021
Posts: 20

Bikes: Trek 820/970, trek zector 3, Miyata 1000/610/615

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 7 Post(s)
Liked 7 Times in 4 Posts
Originally Posted by beng1
Got a set of these in the mail today cheap from a retailer called "Bikesmith". After getting three flats in the last few months with "Bell" brand tires I decided to get something with flat protection. The Panaracer protite model is supposed to have something in it to help prevent flats so we will give them a try. Threw them on the "LeToaster" today;


Just put them on my sons bike, they
look good … now that the snow is gone it’s time to put some miles on them
enjoy
Dman1234 is offline  
Likes For Dman1234:
Old 04-18-23, 07:53 PM
  #19  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Originally Posted by Litho dbh
Tell me about the saddle and post. That looks odd..
They are off a Schwinn World Sport. The seat has been moved as far forward as it can go to give a seating position that a more modern racing bicycle might have. A trick to make older frames work like newer ones. An experiment of mine that works great for me.
beng1 is offline  
Likes For beng1:
Old 05-07-23, 08:06 AM
  #20  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
Update, have over 300 miles on these Panaracer pro-tites now with lots of city riding over glass and gravel and who know's what and no flat yet. Rear tire is showing wear as the flash in the very center is gone and the tiny checkering that makes up some of its tread design is getting smooth, and I expect in another 300 miles it may be gone in the center of the rear tire. I will keep an eye on it and think about rotating the tires front to back at some point. Front still looks new. I weigh 200+ pounds so I may be a lot harder on tires than many riders, also it is a coaster-braked bike exclusively and although a very rarely ever get into a situation where I lock up the rear wheel, it does sometimes happen on wet or damp pavement if I have to stop quickly.

So far the tires and bike are doing exactly what I hoped for, letting me ride without a care in the world, although I still always ride with a spare tube, tools and a pump in my messenger bag.....
beng1 is offline  
Old 05-07-23, 08:10 AM
  #21  
Outrider1
Full Member
 
Outrider1's Avatar
 
Join Date: Jun 2020
Location: Central Florida
Posts: 407

Bikes: Trek Emonda ALR 5

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 301 Times in 140 Posts
That's great Ben! Thanks for the update. I may have to order a set.
Outrider1 is offline  
Likes For Outrider1:
Old 05-08-23, 09:22 AM
  #22  
beng1
Banned
Thread Starter
 
Join Date: Feb 2014
Posts: 678
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 790 Post(s)
Liked 348 Times in 195 Posts
I jinxed it. Went out for a ride today and I think going down a desolate sidewalk I picked up a staple-gun staple, both prongs right into the rear tire and it flatted fast. I think this would have flatted just about any tire though, it would be interesting to see how some other high-end tires would have taken the hit. Here are photos of the tires front and back with the staple in the rear, with a bit over 300 miles on them so you can compare the wear front to back. Since I have to take the wheel off I think I am going to rotate them and put some alloy rims on the bike which a friend gave me the other day;





beng1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.