Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

MTB Drop conversion search continues

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

MTB Drop conversion search continues

Old 03-18-20, 02:58 PM
  #1  
jpjpjp
Member
Thread Starter
 
Join Date: Feb 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 4 Posts
MTB Drop conversion search continues

As a "quarantine" project I've decided to try to find a cheap older and rigid MTB to convert to drop bars, to be used mainly for gravel and light singletrack, but also for grocery runs/light touring. In short, a flexible beater. And while I'm not new to riding bikes, I'm relatively new to building them out/modifying them, so I'm looking for your suggestions/recommendations/wisdom.

Here is what I've found in my area (Baltimore, MD):

-Specialized Hard Rock COMP https://baltimore.craigslist.org/bik...091019719.html
-Bridgestone MB5 Trail Blazer https://www.facebook.com/marketplace...6051264305456/
-Specialized Cross Road https://www.facebook.com/marketplace...8138341158889/

Ideally, I talk the seller down to as close to 100 as I can get them.

Thanks for the input in advance!
jpjpjp is offline  
Old 03-18-20, 03:46 PM
  #2  
Korina
Happy banana slug
 
Korina's Avatar
 
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,752

Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1524 Post(s)
Liked 1,513 Times in 906 Posts
Originally Posted by jpjpjp
As a "quarantine" project I've decided to try to find a cheap older and rigid MTB to convert to drop bars, to be used mainly for gravel and light singletrack, but also for grocery runs/light touring. In short, a flexible beater. And while I'm not new to riding bikes, I'm relatively new to building them out/modifying them, so I'm looking for your suggestions/recommendations/wisdom.

Here is what I've found in my area (Baltimore, MD):

-Specialized Hard Rock COMP https://baltimore.craigslist.org/bik...091019719.html
-Bridgestone MB5 Trail Blazer https://www.facebook.com/marketplace...6051264305456/
-Specialized Cross Road https://www.facebook.com/marketplace...8138341158889/

Ideally, I talk the seller down to as close to 100 as I can get them.

Thanks for the input in advance!
I like that Crossroad, but it's a hybrid not a mtb., and the one I favor. It should do what you want. IMO, of course.
Korina is offline  
Old 03-18-20, 06:12 PM
  #3  
jpjpjp
Member
Thread Starter
 
Join Date: Feb 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 4 Posts
Originally Posted by Korina
I like that Crossroad, but it's a hybrid not a mtb., and the one I favor. It should do what you want. IMO, of course.
Yeah, you know... it's the one I lean towards, for those 700's, too.
jpjpjp is offline  
Likes For jpjpjp:
Old 03-19-20, 03:23 AM
  #4  
100bikes
Industry guy
 
Join Date: Nov 2007
Location: Minnesota
Posts: 353

Bikes: To many to name - I ride a custom built steel frame.

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 115 Post(s)
Liked 80 Times in 48 Posts
Brakes:
Watch out for compatibility issues with the pull rate on the levers and calipers.
Old school levers and v-brakes can be a problem.
New levers and old cantilevers should be ok, but always check the action.

Shifters:
What are you planning for shifters?
Brifters, down tube clamp on style or perhaps a Suntour command shifter?

Mixing brands and vintages( of index type systems) can be a problem.
Friction stuff generally works with mixed brands.

This may be the more difficult aspect of your project.

Good luck.
rusty
100bikes is offline  
Old 03-19-20, 05:24 AM
  #5  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,716

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2910 Post(s)
Liked 2,830 Times in 1,457 Posts
Which one fits? They all look like different sizes, especially that Hard Rock.

You might want to be sure you are buying a full ChroMoly frame and fork.
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk
Bianchigirll is offline  
Old 03-19-20, 05:33 AM
  #6  
due ruote 
Senior Member
 
due ruote's Avatar
 
Join Date: Dec 2006
Posts: 7,707
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 903 Post(s)
Liked 524 Times in 318 Posts
Of those, I like the Crossroads too, if it fits. It’s a small bike.
Keep your eyes open for a Rockhopper. They are a step up from Hard Rock but below Stumpjumpers. Fairly plentiful and often priced well.
due ruote is offline  
Old 03-19-20, 05:37 AM
  #7  
jpjpjp
Member
Thread Starter
 
Join Date: Feb 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 4 Posts
Originally Posted by Bianchigirll
Which one fits? They all look like different sizes, especially that Hard Rock.

You might want to be sure you are buying a full ChroMoly frame and fork.
I haven’t met with sellers yet, but I’m about 6’ 1’’, so I think they should all be in my range.

Originally Posted by 100bikes
Brakes:
Watch out for compatibility issues with the pull rate on the levers and calipers.
Old school levers and v-brakes can be a problem.
New levers and old cantilevers should be ok, but always check the action.

Shifters:
What are you planning for shifters?
Brifters, down tube clamp on style or perhaps a Suntour command shifter?

Mixing brands and vintages( of index type systems) can be a problem.
Friction stuff generally works with mixed brands.

This may be the more difficult aspect of your project.

Good luck.
rusty
I’m thinking brifters right now. Derailleurs are Shimano and all of these look like they have triggers, so I’m banking on compatibility.
jpjpjp is offline  
Old 03-19-20, 06:23 AM
  #8  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times in 165 Posts
At 6' 1" the MB5 and Crossroads will be too small for you. The Hardrock may fit. Crossroads frames in your size will look like this. Notice the length/space at the back of the head tube. A good place to check with a quick glance to determine size on a vintage (horizontal top tube) steel bike.

Road bikes in your size will show 1.5 to 2x the amount of space shown at the back of the head tube. Of course this will always vary according to the geometry and proportions of a given frame, but it will at least give you a rough idea when perusing ads that don't give any dimensions.
__________________
"My only true wisdom is in knowing I have none" -Socrates

Last edited by Hudson308; 03-19-20 at 07:05 AM.
Hudson308 is offline  
Old 03-19-20, 07:24 AM
  #9  
jpjpjp
Member
Thread Starter
 
Join Date: Feb 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 4 Posts
Originally Posted by Hudson308
At 6' 1" the MB5 and Crossroads will be too small for you. The Hardrock may fit. Crossroads frames in your size will look like this. Notice the length/space at the back of the head tube. A good place to check with a quick glance to determine size on a vintage (horizontal top tube) steel bike.

Road bikes in your size will show 1.5 to 2x the amount of space shown at the back of the head tube. Of course this will always vary according to the geometry and proportions of a given frame, but it will at least give you a rough idea when perusing ads that don't give any dimensions.
Hmm.. I see. Just found a Rockhopper that looks to be in good condition and that looks to be that size. Will try to get it test ridden soon.
jpjpjp is offline  
Old 03-19-20, 12:48 PM
  #10  
Chr0m0ly 
Senior Member
 
Chr0m0ly's Avatar
 
Join Date: Apr 2014
Location: Back in Lincoln Sq, Chicago...🙄
Posts: 1,681

Bikes: '84 Miyata 610 ‘91 Cannondale ST600,'83 Trek 720 ‘84 Trek 520, 620, ‘91 Miyata 1000LT, '79 Trek 514, '78 Trek 706, '73 Raleigh Int. frame.

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 678 Post(s)
Liked 362 Times in 217 Posts
Is there a list, era, or brand of mountain bike with shorter top tubes? Every time I’ve tried this I run into the top tube length issue. Every time being two times...
Chr0m0ly is offline  
Old 03-19-20, 12:59 PM
  #11  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times in 165 Posts
Originally Posted by Chr0m0ly
Is there a list, era, or brand of mountain bike with shorter top tubes? Every time I’ve tried this I run into the top tube length issue. Every time being two times...
Heh. I always run into the opposite problem with road bikes. All the MTBs I come across have longer top tubes w/resp to seat tube length. I've only come across two road bikes with top tubes (slightly) longer than the seat tube.
One compromise I was surprised to find is this Trek '91 750 Multitrack. 22.5 x 22.5, center-to-center. I suspect the smaller ones have a long top tube/short seat tube though.
EDIT: I verified that the smaller Multitracks have a short seat tube/long top tube. I have the next size down in a 730, and it measures 21.5" seat tube (C2C), and 22.5 TT (C2C).
__________________
"My only true wisdom is in knowing I have none" -Socrates

Last edited by Hudson308; 03-19-20 at 02:03 PM.
Hudson308 is offline  
Old 03-19-20, 03:51 PM
  #12  
Clang
Senior Member
 
Join Date: Nov 2013
Location: South of the Twin Cities, MN
Posts: 5,806
Mentioned: 29 Post(s)
Tagged: 1 Thread(s)
Quoted: 1115 Post(s)
Liked 2,230 Times in 1,303 Posts
This is likely to be too large (though top tube clearance is less important on a conversion than it would be for a mtb ridden off-road).

GT Karakoram - $75 (Ellicott City)

https://baltimore.craigslist.org/sea...0&min_price=10

Clang is offline  
Old 03-19-20, 06:41 PM
  #13  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times in 165 Posts
Originally Posted by Clang
This is likely to be too large (though top tube clearance is less important on a conversion than it would be for a mtb ridden off-road).

GT Karakoram - $75 (Ellicott City)

https://baltimore.craigslist.org/sea...0&min_price=10

DANG Clang... you psyched me out!!! I thought that was local to us!!!
That's a good deal.
__________________
"My only true wisdom is in knowing I have none" -Socrates
Hudson308 is offline  
Old 03-19-20, 07:39 PM
  #14  
mechanicmatt
Hoards Thumbshifters
 
mechanicmatt's Avatar
 
Join Date: Jul 2010
Location: Signal Mountain, TN
Posts: 1,173

Bikes: '23 Black Mtn MC, '87 Bruce Gordon Chinook, '08 Jamis Aurora, '86 Trek 560, '97 Mongoose Rockadile, & '91 Trek 750

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 245 Post(s)
Liked 322 Times in 189 Posts
Originally Posted by jpjpjp
As a "quarantine" project I've decided to try to find a cheap older and rigid MTB to convert to drop bars, to be used mainly for gravel and light singletrack, but also for grocery runs/light touring. In short, a flexible beater. And while I'm not new to riding bikes, I'm relatively new to building them out/modifying them, so I'm looking for your suggestions/recommendations/wisdom.

Here is what I've found in my area (Baltimore, MD):

-Specialized Hard Rock COMP https://baltimore.craigslist.org/bik...091019719.html
-Bridgestone MB5 Trail Blazer https://www.facebook.com/marketplace...6051264305456/
-Specialized Cross Road https://www.facebook.com/marketplace...8138341158889/

Ideally, I talk the seller down to as close to 100 as I can get them.

Thanks for the input in advance!
I like the crossroads. You should look for a 58CM road frame, and 19-21" MTB and Hybrid frame, in theory that would be your size. Early 90's hybrids have basically touring geometry. I've known several people who have taken Crossroads and converted to drops. Trek Multitracks, especially the lugged variety like others are saying, have close to 520 geometry and frame clearance for 700c x 42c (maybe larger, I just happen to have one).

Geometry is everything though, doesn't matter if the bike is cheap or expensive, got to have a frame to fit. That Hardrock looks to be in the best shape of what you have shown.
mechanicmatt is offline  
Old 03-20-20, 06:55 AM
  #15  
jpjpjp
Member
Thread Starter
 
Join Date: Feb 2020
Posts: 37
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Liked 5 Times in 4 Posts
After consideration and further searching, I'm now looking at this Rockhopper, which I believe is a '96.... But it's hard to know exactly based on color scheme alone. Seller is pretty unresponsive as far as details go. Will need to switch out a good number of parts, but seller is willing to come down to 50, maybe lower...


jpjpjp is offline  
Old 03-20-20, 07:06 AM
  #16  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,093

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times in 165 Posts
I would guess that will fit the bill perfectly!
__________________
"My only true wisdom is in knowing I have none" -Socrates
Hudson308 is offline  
Old 03-20-20, 07:33 AM
  #17  
wrk101
Thrifty Bill
 
wrk101's Avatar
 
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,570

Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more

Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 957 Times in 624 Posts
My advice is always the same, look for a higher end model with higher end parts. I have found several MTBs in the last few weeks with XT components.

Typically when you find high end parts, it will also have higher end frame materials.


A MTB that originally sold for $900 might be available for $100, while one that originally sold for $250 might be available for $75.


FB marketplace can be a very good place to find bikes, as sellers are using it more and more, while buyers aren't. I've seen some incredible deals on FB marketplace.
wrk101 is offline  
Old 03-20-20, 12:02 PM
  #18  
Chris Chicago
Senior Member
 
Chris Chicago's Avatar
 
Join Date: May 2009
Location: near north side
Posts: 1,348
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 83 Post(s)
Liked 31 Times in 20 Posts
that rockhopper at 50 is the way to go. great frame, nice shape, great price. and it should fit you being a taller frame. I wouldn't hesitate to aquire it if I was looking to start a drop bar mtb project.

make sure the stem and seat post arent stuck
Chris Chicago is offline  
Likes For Chris Chicago:
Old 03-20-20, 12:53 PM
  #19  
Classtime 
Senior Member
 
Classtime's Avatar
 
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,672

Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1924 Post(s)
Liked 1,954 Times in 1,086 Posts
Nice one for 50 bucks.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Classtime is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.