Cross Chain Gears
#1
Senior Member
Thread Starter
Cross Chain Gears
I was noticing during the time trial stage of the TDF that some of the Pro Tour riders seem to use the big - big gear surprisingly often. Today I have been watching Tadej Pogačar climb like an angel in the big - big gear, It makes me wonder if we have oversold the otthodoxy regarding cross chaining or is modern race bike technology more tolerant? If is just a matter of chain wear I guess the pros don't care how quickly they wear out. They certainly care about efficiency, even if it is a tiny bit of difference.
For touring, I'd think we all care about both.
For touring, I'd think we all care about both.
Last edited by staehpj1; 07-03-21 at 09:50 AM.
#2
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,182
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3454 Post(s)
Liked 1,454 Times
in
1,133 Posts
Zinn has written a few times about the reduced friction on bigger chainrings and sprockets because the chain links rotate on the chain pins by a smaller angle compared to the friction on smaller sprockets and chainrings. And when you are on a bigger chainring, there is less tension on the chain. Here is an example of some of his comments.
https://www.velonews.com/gear/gear-i...x-drivetrains/
So, maybe the coaches tell them to avoid smaller chainrings? Or, maybe in the heat of competition, that is the last thing he thought about.
Many of us tour on 9 speed chains, I tour on 8 speed chains. I suspect that the wider 8 or 9 speed chains do not appreciate cross chaining very much but the pros are using a lot more gears than 8 or 9 speed cassettes and have narrower chains. I would expect those narrower chains to withstand cross chaining better than the wider chains. And like you say, they probably don't care about chain life like the rest of us do.
One of the reasons that I prefer bar end shifters for my derailleur touring bikes is that when I feel my hand on the lever, I get immediate feedback that tells me if my rear derailleur is on the small sprockets or big sprockets, and that helps me avoid cross chaining.
My rando bike has a brifter for the rear, my road bike has brifters for both front and rear. I get no feedback from the shifter to warn me if I am cross chained or not. And I find I often cross chain on those bikes because I am not specifically thinking about avoiding it.
https://www.velonews.com/gear/gear-i...x-drivetrains/
So, maybe the coaches tell them to avoid smaller chainrings? Or, maybe in the heat of competition, that is the last thing he thought about.
Many of us tour on 9 speed chains, I tour on 8 speed chains. I suspect that the wider 8 or 9 speed chains do not appreciate cross chaining very much but the pros are using a lot more gears than 8 or 9 speed cassettes and have narrower chains. I would expect those narrower chains to withstand cross chaining better than the wider chains. And like you say, they probably don't care about chain life like the rest of us do.
One of the reasons that I prefer bar end shifters for my derailleur touring bikes is that when I feel my hand on the lever, I get immediate feedback that tells me if my rear derailleur is on the small sprockets or big sprockets, and that helps me avoid cross chaining.
My rando bike has a brifter for the rear, my road bike has brifters for both front and rear. I get no feedback from the shifter to warn me if I am cross chained or not. And I find I often cross chain on those bikes because I am not specifically thinking about avoiding it.
#3
Senior Member
Join Date: Sep 2015
Location: Left Coast, Canada
Posts: 5,126
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2236 Post(s)
Liked 1,314 Times
in
707 Posts
Maybe with the advances in 1x drivetrains they've worked out some of the kinks and have migrated to 2x systems (pun intended).
I know that the main problem I have with cross chaining is binding the derailer or very slack chains as I often swap out narrow range clusters for more wider range cassettes. The chain length difference between small small and big big is just too great.
I know that the main problem I have with cross chaining is binding the derailer or very slack chains as I often swap out narrow range clusters for more wider range cassettes. The chain length difference between small small and big big is just too great.
#4
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,605
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1659 Post(s)
Liked 1,808 Times
in
1,053 Posts
The first derailleurs had complicated mechanisms to keep the chainline straight - but the chains of the day wouldn't really flex out of line.
https://www.disraeligears.co.uk/site...railleurs.html
Time marches on; clever folks invent clever things. One hundred and twenty-five years later we have amazingly flexible chains. The tests I've read on driveline efficiency say any increased friction from lateral chain deflection is down in the test data noise (when making use of modern, high quality poly-gear chains, natch).
That was my thinking: Rohloff 56x21. Should help with chain life, too.
https://www.disraeligears.co.uk/site...railleurs.html
Time marches on; clever folks invent clever things. One hundred and twenty-five years later we have amazingly flexible chains. The tests I've read on driveline efficiency say any increased friction from lateral chain deflection is down in the test data noise (when making use of modern, high quality poly-gear chains, natch).
Zinn has written a few times about the reduced friction on bigger chainrings and sprockets because the chain links rotate on the chain pins by a smaller angle compared to the friction on smaller sprockets and chainrings. And when you are on a bigger chainring, there is less tension on the chain.
Last edited by tcs; 07-05-21 at 07:00 AM.
Likes For tcs:
#5
Senior Member
Join Date: Jan 2010
Posts: 39,217
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18398 Post(s)
Liked 15,494 Times
in
7,317 Posts
Riders have been crossing for a long time. Quintana was doing it while in the lead group in today’s alpine stage. Including over one HC climb.
#6
Senior Member
Thread Starter
Yeah, I have been noticing it a lot in recent times and more often than just that it is likely to be a lack of care in shifting. These guys are pros and are selecting the big big for long climbs and long sections on time trials where efficiency would really matter. So I suspect they are after reduced friction of larger diameters mentioned in MSM's post.
#7
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,182
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3454 Post(s)
Liked 1,454 Times
in
1,133 Posts
Yeah, I have been noticing it a lot in recent times and more often than just that it is likely to be a lack of care in shifting. These guys are pros and are selecting the big big for long climbs and long sections on time trials where efficiency would really matter. So I suspect they are after reduced friction of larger diameters mentioned in MSM's post.
#8
Senior Member
As stae said, there's the heat of the action going on, one less thing to deal (front shift) so time saved, no chance of dropping a chain with a front shift
And add in all the tech advances of chain technology and race doubles,and it just must not be a watt losing issue, or they wouldn't be doing it.
but Joe Public we see doing it have no clue, don't clean their drivetrains, and either accept or are surprised and complaining when a bike store tells them they need a new chain and cassette.
And or don't understand why their chains dislodge or jam when back pedalling or moving their bike around in the big big.
oh Stae, I also noticed the big big stuff going on while catching up on stage news so far.
Keen eyed bike nerds need only apply
And add in all the tech advances of chain technology and race doubles,and it just must not be a watt losing issue, or they wouldn't be doing it.
but Joe Public we see doing it have no clue, don't clean their drivetrains, and either accept or are surprised and complaining when a bike store tells them they need a new chain and cassette.
And or don't understand why their chains dislodge or jam when back pedalling or moving their bike around in the big big.
oh Stae, I also noticed the big big stuff going on while catching up on stage news so far.
Keen eyed bike nerds need only apply
Likes For djb:
#9
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,605
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1659 Post(s)
Liked 1,808 Times
in
1,053 Posts
#10
Senior Member
did that happen at one of his two recent stage wins?
I've never heard commentators mention this before with sprint finishes, but that certainly doesn't mean it doesn't happen.
PS looked up and read some stuff about these incidents.
yup, pretty neat and curious combination of quick events doing this.
Last edited by djb; 07-05-21 at 07:16 AM.
#11
Senior Member
Thread Starter
that's pretty neat.
did that happen at one of his two recent stage wins?
I've never heard commentators mention this before with sprint finishes, but that certainly doesn't mean it doesn't happen.
PS looked up and read some stuff about these incidents.
yup, pretty neat and curious combination of quick events doing this.
did that happen at one of his two recent stage wins?
I've never heard commentators mention this before with sprint finishes, but that certainly doesn't mean it doesn't happen.
PS looked up and read some stuff about these incidents.
yup, pretty neat and curious combination of quick events doing this.
https://www.businessinsider.com/fast...ing-off-2021-7
#12
Senior Member
Join Date: Aug 2010
Location: Madison, WI
Posts: 11,182
Bikes: 1961 Ideor, 1966 Perfekt 3 Speed AB Hub, 1994 Bridgestone MB-6, 2006 Airnimal Joey, 2009 Thorn Sherpa, 2013 Thorn Nomad MkII, 2015 VO Pass Hunter, 2017 Lynskey Backroad, 2017 Raleigh Gran Prix, 1980s Bianchi Mixte on a trainer. Others are now gone.
Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 3454 Post(s)
Liked 1,454 Times
in
1,133 Posts
If I backpedal my folding bike with the chain on one of the bigger sprockets, it will drop the chain. Folding bikes have short chainstays, thus the side angle on the chain is more extreme when cross chained and also my chainline is a bit off. Most common when I come to a stop at a stop light and then backpedal to put my pedal in a downstroke position for when the light changes.