Nitto Mini-Bullhorn Bar???
04-05-22, 12:10 PM
#1
bironi
Thread Starter
Join Date: Feb 2010
Posts: 266
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Liked 291 Times
in
118 Posts
Nitto Mini-Bullhorn Bar???
Does anyone here have one?
I would like to know a few measurements.
Is the 34cm width c-t-c or os-os?
What is the outside diameter at the bar ends?
What is the length of the straight grip section at bar ends?
Thanks in advance for any useful responses.
Byron
I would like to know a few measurements.
Is the 34cm width c-t-c or os-os?
What is the outside diameter at the bar ends?
What is the length of the straight grip section at bar ends?
Thanks in advance for any useful responses.
Byron
04-05-22, 03:20 PM
#2
Veteran Racer
Join Date: Jul 2009
Location: Ciudad de Vacas, Tejas
Posts: 11,757
Bikes: 32 frames + 80 wheels
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1331 Post(s)
Liked 764 Times
in
431 Posts
No, I don't own one, however, based on this link >>> https://www.bike-components.de/en/NI...lebars-p67072/
1) Width measurement is C-C
2) The OD could be either 22.2mm or 23.8mm
3) The reach is 112mm
1) Width measurement is C-C
2) The OD could be either 22.2mm or 23.8mm
3) The reach is 112mm
04-05-22, 03:30 PM
#3
bironi
Thread Starter
Join Date: Feb 2010
Posts: 266
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Liked 291 Times
in
118 Posts
No, I don't own one, however, based on this link >>> https://www.bike-components.de/en/NI...lebars-p67072/
1) Width measurement is C-C
2) The OD could be either 22.2mm or 23.8mm
3) The reach is 112mm
1) Width measurement is C-C
2) The OD could be either 22.2mm or 23.8mm
3) The reach is 112mm
I went ahead and ordered one, crossing my fingers for the 23.8mm OD.
Likes For Bianchi pc:
04-05-22, 06:14 PM
#5
Quixote
Join Date: Jun 2019
Location: New York
Posts: 164
Bikes: Bianchi Pista Concept 05, Level 2014
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 78 Times
in
60 Posts
Nitto Rb 030 (38cm) Nitto b 264 (34cm) Unauthorized reproduction of Scott 100k bar
Nitto b 264
Some context and the measurements asked for.
Last edited by Bianchi pc; 04-05-22 at 06:21 PM.
Likes For Bianchi pc:
04-18-22, 11:05 PM
#9
bironi
Thread Starter
Join Date: Feb 2010
Posts: 266
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Liked 291 Times
in
118 Posts
Thanks again Bianchi PC.
I ended up with bars that look similar to your hall shot.
I'm no where near to your slammed stem, but that's what works for me.
70 yrs here, and you?
I ended up with bars that look similar to your hall shot.
I'm no where near to your slammed stem, but that's what works for me.
70 yrs here, and you?
04-18-22, 11:58 PM
#10
Quixote
Join Date: Jun 2019
Location: New York
Posts: 164
Bikes: Bianchi Pista Concept 05, Level 2014
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 78 Times
in
60 Posts
No problem
I'm 52
I liked them on top of the stack of spacers too. Where they are in the pic pulls me a little forward and puts a little more weight on my hands.
- both positions work for me now but from looking at the Bike forums c&v threads I suspect that like most people there will be a point for me where either the bike goes up on a wall to look at and not use or... the stem gets raised.
cheers
I'm 52
I liked them on top of the stack of spacers too. Where they are in the pic pulls me a little forward and puts a little more weight on my hands.
- both positions work for me now but from looking at the Bike forums c&v threads I suspect that like most people there will be a point for me where either the bike goes up on a wall to look at and not use or... the stem gets raised.
cheers
04-20-22, 09:17 PM
#11
bironi
Thread Starter
Join Date: Feb 2010
Posts: 266
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Liked 291 Times
in
118 Posts
One more question if I may,
The reverse brake levers I have currently are Tekro RX 4.1
They have an adjustment hex screw to adjust the lever distance from the bar to accommodate different hand sizes.
What I don't like is that there is no nub extension beyond the lever for out of saddle climbing.
I climb on my road bars with my index fingers in front of the levers.
I see that the Cane Creek 2000TT reverse brake levers provide an extending nub that would allow for my index fingers to pull up on to add to overall climbing strength.
I hope that translates?
Has anyone used this Cane Creek model?
If so, do they have the same adjustability hex screw set up?
I like the Tekro's, but want the Cane Creek nub.
Thanks in advance.
Byron
The reverse brake levers I have currently are Tekro RX 4.1
They have an adjustment hex screw to adjust the lever distance from the bar to accommodate different hand sizes.
What I don't like is that there is no nub extension beyond the lever for out of saddle climbing.
I climb on my road bars with my index fingers in front of the levers.
I see that the Cane Creek 2000TT reverse brake levers provide an extending nub that would allow for my index fingers to pull up on to add to overall climbing strength.
I hope that translates?
Has anyone used this Cane Creek model?
If so, do they have the same adjustability hex screw set up?
I like the Tekro's, but want the Cane Creek nub.
Thanks in advance.
Byron
04-22-22, 01:03 PM
#12
Fxxxxr
Join Date: Jan 2017
Location: falfurrias texas
Posts: 1,002
Bikes: wabi classic (stolen & recovered)
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 2671 Post(s)
Liked 1,151 Times
in
872 Posts
the bars are compatable with most anything and are as comfy as a flat bar
__________________
Nothing is true---everything is permitted
Nothing is true---everything is permitted
Likes For jack pot:
04-24-22, 08:49 PM
#13
bironi
Thread Starter
Join Date: Feb 2010
Posts: 266
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 98 Post(s)
Liked 291 Times
in
118 Posts
What brand is your fixed gear?
Are these the same bars I recently installed?
I like the look of your crank.
Thanks much!
Are these the same bars I recently installed?
I like the look of your crank.
Thanks much!
Last edited by bironi; 04-24-22 at 08:50 PM. Reason: stupidity
