Vintage Stronglight crank bolt sourcing
#1
Full Member
Thread Starter
Join Date: Dec 2020
Location: Minnesota
Posts: 301
Bikes: a few
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 91 Post(s)
Liked 367 Times
in
141 Posts
Vintage Stronglight crank bolt sourcing
Hello All,
Just picked up a 1973 Raleigh Super Course this week.
Seems to be all there minus the Brooks saddle.
Looking at the crankset it is made by Stronglight but I need to source one of the 3 bolts that hold the crankset to the chainring.
Does anyone out there have a good parts source for this?
Please PM me if you do and Many Thanks!
Just picked up a 1973 Raleigh Super Course this week.
Seems to be all there minus the Brooks saddle.
Looking at the crankset it is made by Stronglight but I need to source one of the 3 bolts that hold the crankset to the chainring.
Does anyone out there have a good parts source for this?
Please PM me if you do and Many Thanks!
#2
Senior Member
Join Date: Feb 2013
Location: Alta California
Posts: 14,244
Mentioned: 415 Post(s)
Tagged: 1 Thread(s)
Quoted: 3803 Post(s)
Liked 3,324 Times
in
2,170 Posts
-----
thread is 7.0mm X 1.0
no need for an official Stronglight bolt or one through the cycle trade
anyplace which offers metric bolts will suffice...
-----
thread is 7.0mm X 1.0
no need for an official Stronglight bolt or one through the cycle trade
anyplace which offers metric bolts will suffice...
-----
Likes For juvela:
#4
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 777
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 133 Times
in
80 Posts
McMaster-Carr. Not sure how long you need. Also, I don't know what the shipping cost would be.
#5
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Likes For scarlson:
#6
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 777
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 133 Times
in
80 Posts
"Shipping: US $56.80 USPS Priority Mail International Medium Flat Rate BoxTM" !
Likes For John Nolan:
#7
Senior Member
Join Date: Dec 2005
Posts: 17,146
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3803 Post(s)
Liked 6,639 Times
in
2,602 Posts
Hello All,
Just picked up a 1973 Raleigh Super Course this week.
Seems to be all there minus the Brooks saddle.
Looking at the crankset it is made by Stronglight but I need to source one of the 3 bolts that hold the crankset to the chainring.
Does anyone out there have a good parts source for this?
Please PM me if you do and Many Thanks!
Just picked up a 1973 Raleigh Super Course this week.
Seems to be all there minus the Brooks saddle.
Looking at the crankset it is made by Stronglight but I need to source one of the 3 bolts that hold the crankset to the chainring.
Does anyone out there have a good parts source for this?
Please PM me if you do and Many Thanks!
The three on the right are longer than the three on the left and a bit narrower. Could you measure the length of the bolt you need?
Both sets came from cranks in this tub:
There are likely some 116bcd steel Stronglight in that pile, and I can check these bolts on one of those.
Likes For nlerner:
#8
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,845
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2925 Post(s)
Liked 2,921 Times
in
1,489 Posts
where did you look? The big boxes are useless for this you need to go to Ace, Do it Best, or True Value. Maybe a Mom and Pop auto parts place, you know the kind that still has a real machine shop out back.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
Likes For Bianchigirll: