Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

1988/89 Litespeed Titanium

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

1988/89 Litespeed Titanium

Old 04-18-21, 02:09 PM
  #1  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts
1988/89 Litespeed Titanium

Here it is, my unnecessary pandemic purchase. A 1988 (or possibly '89) Litespeed "Titanium". As far as I'm aware, this is the first Litespeed branded bicycle, which was superseded in 1990 by the "Road" model.




Non-drive side internal cable routing and shifter pod

Everything on these very early bikes is pretty rough. There are hand-filing marks everywhere, and it was likely also hand-polished.

The only documentation I've been able to find on this model is in the May 1988 Bicycle Guide. They built their test model with six-speed 600 SIS, with the most fancy feature being the wheels laced with Litespeed ti spokes. The review of the bike was overall positive (rough aesthetic details notwithstanding), and suggested that the sloping top tube wasn't aggressive enough to prevent leisurely, all-day rides (ah the 80s). There are a few differences between the BG test bike and my frame: the BG bike's dropouts are not drilled with lightening holes and it lacks a pump peg.
I can upload more pictures if anyone is interested in details. Dave Levy at Ti Cycles had plenty to say about the frame, mostly about how close to a working prototype it appeared to be. The left and right dropouts were cut from different pieces of Ti plate and are different widths, for example. I had Dave check out the frame to make sure it didn't have any hair-line cracks and had the alignment straightened for good measure as well.

I'd like to outfit the frame with the correct Vitus 979 fork so tomorrow I'm going to go take a look at a cheap Vitus posted nearby. Looks like the steer tube will be too long since the Vitus is a 56cm with standard geometry while mine has a short head tube on top of being a 53/54, so I will likely have to have it threaded down and cut, unless that's considered too sacrilegious, in which case I can try to trade it for a properly sized fork.

As for the rest of the build, I'd like to go with something fancy and (mostly) period-correct, so either 6 or 7 speed 126mm stuff. Either Dura Ace or Superbe Pro would be fun. I'm not exactly sure what to do about the shifter pod though, since most everything I've been able to find has standard concave shifter washers meant for down tube placement. I've heard that Shimano made flat shifter mount plates for this purpose, but I can't find any. If I was rich I'd go with a Mavic SSC build and use the composite 821 shifters with flat mount surfaces... What do folks think?
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com



Last edited by 3dvvitch; 04-18-21 at 07:28 PM.
3dvvitch is offline  
Old 04-18-21, 03:08 PM
  #2  
AMDG
Junior Member
 
Join Date: Apr 2021
Location: Montreal
Posts: 11

Bikes: 1977 Busana (Oscar Simonato), 1984 Giuseppe Villata, 1981 Giuseppe Limongi (track), 1981 Rossin Record

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Liked 6 Times in 4 Posts
That's a real beauty! I look forward to seeing it built!
AMDG is offline  
Likes For AMDG:
Old 04-18-21, 06:05 PM
  #3  
SpeedofLite 
Senior Member
 
SpeedofLite's Avatar
 
Join Date: Aug 2010
Location: Central Florida, USA
Posts: 2,011

Bikes: Litespeed (9); Slingshot (9); Specialized (3); Kestrel (2); Cervelo (1); FELT (1); Trek (2)

Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 431 Post(s)
Liked 3,397 Times in 983 Posts
Originally Posted by 3dvvitch
Here it is, my unnecessary pandemic purchase. A 1988 (or possibly '89) Litespeed "Titanium". As far as I'm aware, this is the first Litespeed branded bicycle, which was superseded in 1990 by the "Road" model.



The only documentation I've been able to find on this model is in the May 1988 Bicycle Guide.
You made me look for it. I'll probably post this separately in the months ahead, but it deserves a spot here too.





__________________
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.














SpeedofLite is offline  
Likes For SpeedofLite:
Old 04-18-21, 07:25 PM
  #4  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts
Originally Posted by SpeedofLite
You made me look for it. I'll probably post this separately in the months ahead, but it deserves a spot here too.
Thank you for the scans!
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com


3dvvitch is offline  
Old 04-18-21, 09:18 PM
  #5  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 13,317

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 659 Post(s)
Liked 595 Times in 313 Posts
That is an awesome frame! I have seen only one Litespeed in our area, they just don’t seem to exist up here in cold country. Would love to have one some day. Enjoy that beast!
OldsCOOL is offline  
Old 04-18-21, 09:43 PM
  #6  
Jeff Wills
Insane Bicycle Mechanic
 
Jeff Wills's Avatar
 
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,811
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 788 Post(s)
Liked 688 Times in 367 Posts
Originally Posted by 3dvvitch

As for the rest of the build, I'd like to go with something fancy and (mostly) period-correct, so either 6 or 7 speed 126mm stuff. Either Dura Ace or Superbe Pro would be fun. I'm not exactly sure what to do about the shifter pod though, since most everything I've been able to find has standard concave shifter washers meant for down tube placement. I've heard that Shimano made flat shifter mount plates for this purpose, but I can't find any. If I was rich I'd go with a Mavic SSC build and use the composite 821 shifters with flat mount surfaces... What do folks think?
They are identical to the plates used on Vitus and Cannondale frames and the bar-end shifters. I hope that helps.

OTOH, all Mavic SSC would be totally cool.
__________________
Jeff Wills

Comcast nuked my web page. It will return soon..
Jeff Wills is offline  
Old 04-18-21, 11:01 PM
  #7  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts
Originally Posted by Jeff Wills
They are identical to the plates used on Vitus and Cannondale frames and the bar-end shifters. I hope that helps.
Oh that's great- sounds like I was just looking in the wrong places!
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com


3dvvitch is offline  
Old 04-26-21, 08:57 PM
  #8  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts

Weekend update: I found this listed in the region for a basically reasonable price and grabbed it as a potential donor bike. The problem (aside from the lack of usable shifters) is that the starfish era ssc stuff is much more representative of the early 90s than the late 80s. So, now I have to decide whether to dispense with period correctness and transfer the parts, or just keep them on standby for a different project and continue my search...
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com


3dvvitch is offline  
Likes For 3dvvitch:
Old 04-26-21, 09:43 PM
  #9  
Jeff Wills
Insane Bicycle Mechanic
 
Jeff Wills's Avatar
 
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,811
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 788 Post(s)
Liked 688 Times in 367 Posts
Originally Posted by 3dvvitch
Weekend update: I found this listed in the region for a basically reasonable price and grabbed it as a potential donor bike. The problem (aside from the lack of usable shifters) is that the starfish era ssc stuff is much more representative of the early 90s than the late 80s. So, now I have to decide whether to dispense with period correctness and transfer the parts, or just keep them on standby for a different project and continue my search...
Screw "period correctness"! Make up a story if you like:
"The frame hung around in the back room of a bike shop before someone decided to build it. At that point the Mavic SSC parts were cool and exotic and the new owner like the way the gray anodization played off the titanium frame."
__________________
Jeff Wills

Comcast nuked my web page. It will return soon..
Jeff Wills is offline  
Likes For Jeff Wills:
Old 04-26-21, 10:00 PM
  #10  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,825

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4743 Post(s)
Liked 3,860 Times in 2,509 Posts
Cool! I rode a Merlin MTB for a quick ride a year or two after that was built. I knew instantly that a road version was, for me, it! Also that it would have to be custom, cost ~$4000 and I simply didn't have the cash. Most of two decades later I landed "the job". Living in Portland it was a no-brainer to go to Dave Levy. (He'd already built me several stems, I'd been to his shop a few times, seen his raw work and knew the shop owner that sold his frames. You got your frame checked by the guy I'd go to.)

He's now built me two ti bikes, both with steel forks. I love the rides.
79pmooney is online now  
Likes For 79pmooney:
Old 04-27-21, 04:53 AM
  #11  
top506
Death fork? Naaaah!!
 
top506's Avatar
 
Join Date: Nov 2005
Location: The other Maine, north of RT 2
Posts: 5,313

Bikes: Seriously downsizing.

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 555 Post(s)
Liked 615 Times in 275 Posts
Originally Posted by 3dvvitch

Weekend update: I found this listed in the region for a basically reasonable price and grabbed it as a potential donor bike. The problem (aside from the lack of usable shifters) is that the starfish era ssc stuff is much more representative of the early 90s than the late 80s. So, now I have to decide whether to dispense with period correctness and transfer the parts, or just keep them on standby for a different project and continue my search...


I had no qualms about mixing and matching Mavic of different periods:




Love the starfish!

Top
__________________
You know it's going to be a good day when the stem and seatpost come right out.

(looking for a picture and not seeing it? Thank the Photobucket fiasco.PM me and I'll link it up.)
top506 is offline  
Likes For top506:
Old 05-01-21, 10:31 AM
  #12  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts
Ok here's an issue: I don't think I can chamfer the bottom bracket housing on my frame in order to make the Mavic unit fit (nor would I really want to), and there are scattered reports of Mavic cranks requiring ISO spindles rather than JIS. What BB should I use then?

EDIT: I looked again and found this post: https://www.bikeforums.net/20557141-post34.html

Sounds like I need a Campy Victory bb for the starfish
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com



Last edited by 3dvvitch; 05-04-21 at 12:08 AM.
3dvvitch is offline  
Old 05-06-21, 09:10 PM
  #13  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts


Couldn't help but do a bit of partial mocking up today 😎

Now I can't decide whether to use the correct but scratched vitus fork I was able to scrounge, or use the grey anodized fork (Kinesis?) that's on the donor cdale... I feel like the darker fork might help mediate between the polished ti and the black bits?
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com


3dvvitch is offline  
Old 05-07-21, 06:32 AM
  #14  
thinktubes 
weapons-grade bolognium
 
thinktubes's Avatar
 
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,335

Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 2,353 Times in 882 Posts
thinktubes is offline  
Likes For thinktubes:
Old 05-07-21, 09:03 AM
  #15  
romperrr 
Pedal to the medal
 
Join Date: Sep 2012
Location: The Arsenal of Democracy
Posts: 1,348

Bikes: 1991 Team Miyata Track, 1992 Lemond Alpe d'Huez, 19?? Schwinn High Serra, 1982 Trek 614, 198X Raleigh Alyeska

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 286 Post(s)
Liked 198 Times in 127 Posts
Using the C'dale fork as a mediator between the polished Ti at black parts sounds promising to these ears.
romperrr is offline  
Old 07-10-21, 03:59 PM
  #16  
3dvvitch 
Junior Wingnut
Thread Starter
 
3dvvitch's Avatar
 
Join Date: Nov 2020
Posts: 92

Bikes: 1988 Litespeed, some Lemond, Slingshot 650c, blah blah

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 31 Post(s)
Liked 42 Times in 16 Posts
Update




The Mavic stuff is lovely but I decided to leave that for a different build and take the Litespeed in a different direction. Call me vain, but I love a mockup. Now I need the right wheels to go with the Sugino75 road groupset...
__________________
https://early-titanium-archive.neocities.org
early_titanium87@aol.com


3dvvitch is offline  
Likes For 3dvvitch:
Old 07-10-21, 05:40 PM
  #17  
cycleheimer
Senior Member
 
cycleheimer's Avatar
 
Join Date: Nov 2008
Location: New York Metro Area
Posts: 4,249

Bikes: '02 Litespeed, '99 Bianchi Alfana. '91 Fuji Saratoga, '84 Peugeot Canyon Express, '82 Moto GR, '81 Fuji America, '81 Fuji Royale; '78 Bridgestone Diamond Touring, '76 Fuji America, plus many more!

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 178 Post(s)
Liked 222 Times in 126 Posts
Hoping to be out on my Litespeed tomorrow!
cycleheimer is offline  
Old 07-10-21, 06:08 PM
  #18  
Rocket-Sauce 
Port
 
Rocket-Sauce's Avatar
 
Join Date: Jan 2008
Location: Boston
Posts: 9,496

Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 1,802 Times in 1,037 Posts
That Sugino 75 groupset is dead sexy.
Subscribed.

Last edited by Rocket-Sauce; 07-10-21 at 06:19 PM.
Rocket-Sauce is offline  
Likes For Rocket-Sauce:
Old 07-10-21, 06:27 PM
  #19  
thinktubes 
weapons-grade bolognium
 
thinktubes's Avatar
 
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,335

Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 2,353 Times in 882 Posts
Was Sugino 75 made by Suntour? Looks a lot like some of their later stuff.
thinktubes is offline  
Likes For thinktubes:
Old 07-11-21, 08:55 AM
  #20  
WaveyGravey
Full Member
 
Join Date: Jul 2018
Posts: 300
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 105 Post(s)
Liked 75 Times in 58 Posts
Anyone have info on the Litespeed Tuscany? Thanks
WaveyGravey is offline  
Old 07-11-21, 09:37 AM
  #21  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 2,652

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 560 Post(s)
Liked 546 Times in 396 Posts
Originally Posted by WaveyGravey
Anyone have info on the Litespeed Tuscany? Thanks
You will get better info than I can give as I only had one for a few weeks as I decided it was a little small. I liked the shaped tubes even though I am clearly a C&V guy. Not polished like the lovely OP's bike, much more modern in appearance but did have nicer welds. It tracked well and I always take a bike to a serious decline near me to see how stable and controlled we are at more speed than I am comfortable with and I can say w/o a doubt it was a stable ride.
easyupbug is offline  
Old 07-11-21, 09:41 AM
  #22  
thinktubes 
weapons-grade bolognium
 
thinktubes's Avatar
 
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,335

Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 984 Post(s)
Liked 2,353 Times in 882 Posts
wavygravy start a new thread if you're looking for Tuscany info
thinktubes is offline  
Old 07-12-21, 07:22 AM
  #23  
Rocket-Sauce 
Port
 
Rocket-Sauce's Avatar
 
Join Date: Jan 2008
Location: Boston
Posts: 9,496

Bikes: 2022 Soma Fog Cutter, 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 971 Post(s)
Liked 1,802 Times in 1,037 Posts
Originally Posted by thinktubes
Was Sugino 75 made by Suntour? Looks a lot like some of their later stuff.
Yup.
https://www.disraeligears.co.uk/site...railleurs.html
Rocket-Sauce is offline  
Likes For Rocket-Sauce:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.