V-brakes: LDC Pro vs. Speedline Elite?
#1
BF's Resident Dumbass
Thread Starter
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566
Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,494 Times
in
496 Posts
V-brakes: LDC Pro vs. Speedline Elite?
I'm flying this up the BMX flagpole because these are primarily marketed to the BMX cohort.
Although stopping power is fine, the issue I'm having is flexy V-brake arms that result in somewhat poor feel and modulation at the lever. As you might expect, because of the longer cable and housing, the issue was more prominent in the rear brake than the front. Changing the spiral cable housing to a compressionless type helped a lot, but the problem is now more pronounced; the brake arms just bend more the harder I pull at the lever.
What I'm looking for is stiff brake arms that don't flex (as much) with harder braking. I'm no engineer, but it would seem to me that the design of the LDCs and the Speedlines goes a long way to minimize flex in the V-brake arms.
Given the price difference in favor of the LDC, I wonder what the Speedline has to offer over the LDC. Can those who have experience with either or both share their thoughts? Thanks in advance!
Although stopping power is fine, the issue I'm having is flexy V-brake arms that result in somewhat poor feel and modulation at the lever. As you might expect, because of the longer cable and housing, the issue was more prominent in the rear brake than the front. Changing the spiral cable housing to a compressionless type helped a lot, but the problem is now more pronounced; the brake arms just bend more the harder I pull at the lever.
What I'm looking for is stiff brake arms that don't flex (as much) with harder braking. I'm no engineer, but it would seem to me that the design of the LDCs and the Speedlines goes a long way to minimize flex in the V-brake arms.
Given the price difference in favor of the LDC, I wonder what the Speedline has to offer over the LDC. Can those who have experience with either or both share their thoughts? Thanks in advance!
Likes For sjanzeir:
#2
Live not by lies.
Join Date: Nov 2020
Posts: 1,306
Bikes: BigBox bikes.
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times
in
582 Posts
Have you tried kool stop pads?
One way to reduce flex would be to use a stickier brake pad. Because you aren’t putting as much force in to get the same friction.
One way to reduce flex would be to use a stickier brake pad. Because you aren’t putting as much force in to get the same friction.
Likes For SkinGriz:
#3
BF's Resident Dumbass
Thread Starter
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566
Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,494 Times
in
496 Posts
I haven't tried Kool Stops, but I have considered ordering a set and seeing what happens. I'm just making sure that I'm covering all bases. My original question still stands.
#4
Hack
Join Date: Sep 2015
Location: Ottawa, Ontario, Canada
Posts: 1,265
Bikes: TrueNorth CX bike, 88 Bianchi Strada (currently Sturmey'd), Yess World Cup race BMX, Pure Cruiser race BMX, RSD Mayor v3 Fatbike
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 347 Post(s)
Liked 189 Times
in
131 Posts
Have you looked into a brake booster? Seatstays are often the tubes on a frame with the most flex, while no doubt the arms are flexing a little, frame flex might be contributing as well - that and cable/housing are pretty much why the rear would be worse than the front.
#5
BF's Resident Dumbass
Thread Starter
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566
Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,494 Times
in
496 Posts
Thanks. We've already covered brake boosters in the thread I linked to earlier and I had decided that it wasn't the kind of route that I wanted to go down. I've been able to solve the problem with a compressionless brake outer and Litepro brake arms out of China that are much stiffer than the factory Tektros. Though I'm perfectly happy with the way the rear brake performs and feels now, I am looking into the possibility of brand-name replacements from LDC, Bombshell, Bullseye, and Speedline.
#6
BF's Resident Dumbass
Thread Starter
Join Date: Apr 2016
Location: Jeddah, Saudi Arabia
Posts: 1,566
Bikes: 1990 Raleigh Flyer (size 21"); 2014 Trek 7.6 FX (size 15"); 2014 Trek 7.6 FX (size 17.5"); 2019 Dahon Mu D9; 2020 Dahon Hemingway D9
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 792 Post(s)
Liked 1,494 Times
in
496 Posts
Last edited by sjanzeir; 04-05-23 at 12:41 AM.