Cassette Setup Question
02-17-14, 10:03 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,304
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 657 Post(s)
Liked 584 Times
in
309 Posts
Cassette Setup Question
Doing my first freehub wheel and cassette setup on a new set of wheels. The wheels are Vuelta Corsa's with 130mm spacing and 10-11sp capability.
My question is what will I need for spacers and/or additional parts to install a shimano 7sp HG20 cassette? The hub is shimano-ready.
Thanx!
My question is what will I need for spacers and/or additional parts to install a shimano 7sp HG20 cassette? The hub is shimano-ready.
Thanx!
02-17-14, 10:07 PM
#2
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 37,924
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Mentioned: 134 Post(s)
Tagged: 1 Thread(s)
Quoted: 5366 Post(s)
Liked 1,806 Times
in
1,023 Posts
You may not need any spacers or anything else other than the cassette and lockring. The cassette comes with it's own internal (sprocket to sprocket) and most include lockrings.
However, you may (MAY, not WILL) need a 2mm or so spacer behind the cassette to bring it out so it overhangs the frone of the freehub and th lockring can compress it without bottoming against the freehub. This varies brand to brand, and I never sweat about it, and deal with it if/when I need to.
However, you may (MAY, not WILL) need a 2mm or so spacer behind the cassette to bring it out so it overhangs the frone of the freehub and th lockring can compress it without bottoming against the freehub. This varies brand to brand, and I never sweat about it, and deal with it if/when I need to.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
“Never argue with an idiot. He will only bring you down to his level and beat you with experience.”, George Carlin
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
02-17-14, 10:49 PM
#3
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,304
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 657 Post(s)
Liked 584 Times
in
309 Posts
You may not need any spacers or anything else other than the cassette and lockring. The cassette comes with it's own internal (sprocket to sprocket) and most include lockrings.
However, you may (MAY, not WILL) need a 2mm or so spacer behind the cassette to bring it out so it overhangs the frone of the freehub and th lockring can compress it without bottoming against the freehub. This varies brand to brand, and I never sweat about it, and deal with it if/when I need to.
However, you may (MAY, not WILL) need a 2mm or so spacer behind the cassette to bring it out so it overhangs the frone of the freehub and th lockring can compress it without bottoming against the freehub. This varies brand to brand, and I never sweat about it, and deal with it if/when I need to.
02-18-14, 07:39 AM
#5
Really Old Senior Member
https://www.jensonusa.com/!uqNDA5M7KG...assette-Spacer
My LBS sells them for $2 IF they have them in stock.
My LBS sells them for $2 IF they have them in stock.
02-18-14, 08:02 AM
#6
Senior Member
Thread Starter
Join Date: Jul 2004
Location: northern michigan
Posts: 13,304
Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 657 Post(s)
Liked 584 Times
in
309 Posts
https://www.jensonusa.com/!uqNDA5M7KG...assette-Spacer
My LBS sells them for $2 IF they have them in stock.
My LBS sells them for $2 IF they have them in stock.
02-18-14, 08:46 AM
#7
Really Old Senior Member
You probably didn't get the "correct" wheel.
I'm too ignorant about the 10/11 speed free Hub body dimensions.
The 4.5mm spacer is used to put on a 7 speed cassette on a 8/9/10 speed body.
I "think" the 10/11 speed body is slightly longer yet, but I don't know by how much.
I imagine, using a bit more spacer would work.
The downside-
The longer the FH body is, the greater the amount of dish is required for the wheel.
Note how the DS spokes run "straighter" to the hub than the NDS-
This results in a greater difference between DS & NDS spoke tension.
Your hub should "work" with enough spacing, but the best scenario would have been a "true" 7 speed hub (getting harder to find a wheel set with that) which would have resulted in a more symmetrical wheel.
I'm too ignorant about the 10/11 speed free Hub body dimensions.
The 4.5mm spacer is used to put on a 7 speed cassette on a 8/9/10 speed body.
I "think" the 10/11 speed body is slightly longer yet, but I don't know by how much.
I imagine, using a bit more spacer would work.
The downside-
The longer the FH body is, the greater the amount of dish is required for the wheel.
Note how the DS spokes run "straighter" to the hub than the NDS-
This results in a greater difference between DS & NDS spoke tension.
Your hub should "work" with enough spacing, but the best scenario would have been a "true" 7 speed hub (getting harder to find a wheel set with that) which would have resulted in a more symmetrical wheel.
02-18-14, 09:33 AM
#8
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2025 Post(s)
Likes: 0
Liked 1,089 Times
in
736 Posts
You will certainly need the 4.5 mm spacer required to use a 7-speed cassette on an 8/9/10-speed freehub. You will probably need another 1 or 2 mm of spacers to compensate for the slightly longer 11-speed compatible freehub body.
