Campagnolo cassette cog spacer order.
03-14-15, 08:51 AM
#1
Senior Member
Thread Starter
Campagnolo cassette cog spacer order.
I've must have messed up the order of the spacers on my 10 speed cassette. It has 2 thick black big spacers, one yellowish clear thick spacer and one big thin spacer. And the other 4 are small thick round spacers. Where ever I put the thin spacer the chain skips on that cog. What is the order of the spacers, where does the thin spacer go? Thanks
__________________
Semper fi
Semper fi
03-14-15, 09:38 AM
#2
Full Member
Here you go - you'll find the spacers have the identifier marked on them, though it is sometimes hard to read.
A set of verniers, if you have them, will let you measure, if you can't read the identifier ...
Don't forget that the lockring torque, contrary to widely-held opinion *does matter* so please ensure it's locked down to 40 nm
HTH
Graeme
Velotech Cycling Ltd
Cmapagnolo main UK Technical and Service Centre
A set of verniers, if you have them, will let you measure, if you can't read the identifier ...
Don't forget that the lockring torque, contrary to widely-held opinion *does matter* so please ensure it's locked down to 40 nm
HTH
Graeme
Velotech Cycling Ltd
Cmapagnolo main UK Technical and Service Centre
03-14-15, 10:02 AM
#3
Junior Member
Join Date: Jan 2010
Location: On the Road
Posts: 15
Bikes: No name carbon frame w/full Campy Record components
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Last edited by langedp; 03-14-15 at 10:08 AM.
03-14-15, 11:01 AM
#4
Senior Member
Thread Starter
Thank you!
__________________
Semper fi
Semper fi
