Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Squeaking noise from bottom bracket

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Squeaking noise from bottom bracket

Old 07-25-21, 06:50 PM
  #1  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Squeaking noise from bottom bracket

My 86 Panasonic DX 5000 has developed a squeaking noise that I believe
is coming from the bottom bracket. It doesn't make the noise when coasting
or when it's on a stand. Only when pressure is applied to the pedals. It almost
sounds like squeaking rubber. The person I bought it from earlier this year
told me he had serviced all the bearings
robertj298 is offline  
Old 07-25-21, 07:14 PM
  #2  
Bigbus
Very Senior Member
 
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211

Bikes: Giant Quasar & Fuji Roubaix

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times in 244 Posts
A quick search says that bike came with a sealed bottom bracket set and Shimano 600 EX crank set. Have you tried wiggling a pedal side to side and see if the crank arm has any play in it? I doubt if the person you bought it from serviced the bottom bracket, but hey, I've been wrong before.
Bigbus is offline  
Old 07-25-21, 07:40 PM
  #3  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by Bigbus
A quick search says that bike came with a sealed bottom bracket set and Shimano 600 EX crank set. Have you tried wiggling a pedal side to side and see if the crank arm has any play in it? I doubt if the person you bought it from serviced the bottom bracket, but hey, I've been wrong before.
No play in the crank arm. I did notice one pedal spins more freely than the other.
Could this cause a squeaking noise and could that noise only occur under load?
robertj298 is offline  
Old 07-25-21, 07:50 PM
  #4  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Take the pedals from another bike and put them on the bike that's squeaking. Remember that the left pedal is reverse threaded.
Rolla is offline  
Likes For Rolla:
Old 07-25-21, 08:08 PM
  #5  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,319

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 1438 Post(s)
Liked 1,092 Times in 723 Posts
Originally Posted by Rolla
Take the pedals from another bike and put them on the bike that's squeaking. Remember that the left pedal is reverse threaded.
Clean the pedal and crankarm threads and grease one or the other before assembling and torqueing.
dsbrantjr is offline  
Old 07-25-21, 08:30 PM
  #6  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by Rolla
Take the pedals from another bike and put them on the bike that's squeaking. Remember that the left pedal is reverse threaded.
I changed the pedal on the one that was stiff, Still squeaks. I notice it squeaks
on the downstroke of both pedals.
robertj298 is offline  
Old 07-25-21, 08:53 PM
  #7  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Pull the BB and inspect. You might just re-grease the threads and re-install, but if it's a cartridge unit, it's cheap and easy to replace.
Rolla is offline  
Old 07-26-21, 07:17 AM
  #8  
andrewclaus
Senior Member
 
Join Date: Feb 2012
Location: Golden, CO and Tucson, AZ
Posts: 2,822

Bikes: 2016 Fuji Tread, 1983 Trek 520

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 669 Post(s)
Liked 725 Times in 422 Posts
Of course, if the noise goes away when you stand up out of the saddle and pedal, it's the saddle or clamp. It's amazing how that noise telegraphs to the BB.
andrewclaus is offline  
Likes For andrewclaus:
Old 07-26-21, 08:00 AM
  #9  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,934

Bikes: Several, mostly not name brands.

Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3571 Post(s)
Liked 3,366 Times in 1,915 Posts
Noises like this are notoriously difficult to track down. It could be the bottom bracket or pedals, but also could be shoe cleats, saddle rails, even handlebars or even something else entirely. Change one thing at a time until you can isolate the cause.
JohnDThompson is online now  
Old 07-26-21, 09:18 AM
  #10  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by andrewclaus
Of course, if the noise goes away when you stand up out of the saddle and pedal, it's the saddle or clamp. It's amazing how that noise telegraphs to the BB.
Tried this and still squeaks
robertj298 is offline  
Old 07-26-21, 09:20 AM
  #11  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by Bigbus
A quick search says that bike came with a sealed bottom bracket set and Shimano 600 EX crank set. Have you tried wiggling a pedal side to side and see if the crank arm has any play in it? I doubt if the person you bought it from serviced the bottom bracket, but hey, I've been wrong before.
I know this is supposed to have a sealed bottom bracket but the fittings on the outside look the same as my bikes that have the cup and cone.
Shouldn't it have a different fitting?
robertj298 is offline  
Old 07-26-21, 09:42 AM
  #12  
Bigbus
Very Senior Member
 
Join Date: Mar 2018
Location: Always on the Run
Posts: 1,211

Bikes: Giant Quasar & Fuji Roubaix

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 413 Post(s)
Liked 343 Times in 244 Posts
Originally Posted by robertj298
I know this is supposed to have a sealed bottom bracket but the fittings on the outside look the same as my bikes that have the cup and cone.
Shouldn't it have a different fitting?
No, they'll look the same and both will use square taper cranks. Rolla might have offered the best suggestion with removing the bracket, inspect it for play and resistance and put a little grease on the threads before you re-install. Sometimes that little bit of friction in the threads can cause a noise. Good luck
Bigbus is offline  
Old 07-26-21, 09:57 AM
  #13  
2_i 
Senior Member
 
Join Date: Sep 2005
Location: Michigan
Posts: 3,693

Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 834 Post(s)
Liked 332 Times in 247 Posts
Usually, these are BB cups or arm bolts that are not tightened enough. The previous owner has not tightened them enough and you just follow the path, scared of overtightening.
2_i is offline  
Old 07-26-21, 10:38 AM
  #14  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by 2_i
Usually, these are BB cups or arm bolts that are not tightened enough. The previous owner has not tightened them enough and you just follow the path, scared of overtightening.
I haven’t done anything to them yet
robertj298 is offline  
Old 07-27-21, 01:51 PM
  #15  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by 2_i
Usually, these are BB cups or arm bolts that are not tightened enough. The previous owner has not tightened them enough and you just follow the path, scared of overtightening.
Could they be tightened too much? I have the axle and bearings removed cup seemed tightened pretty tight.
All the ones I relubed before I tightened them just enough so there was no no play in the axle but they
still turn freely
robertj298 is offline  
Old 07-27-21, 01:55 PM
  #16  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by Bigbus
No, they'll look the same and both will use square taper cranks. Rolla might have offered the best suggestion with removing the bracket, inspect it for play and resistance and put a little grease on the threads before you re-install. Sometimes that little bit of friction in the threads can cause a noise. Good luck
They were cup and cone. The grease was dirty so I thought I might as well
clean and regrease them.. The inside of the bottom bracket ,the axle and all
the bearings looked like new when cleaned up. Never had the inside of a
bottom bracket look so clean. Now I just have to regrease and put back together.
robertj298 is offline  
Likes For robertj298:
Old 07-27-21, 02:00 PM
  #17  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Originally Posted by robertj298
Could they be tightened too much?
Most BBs take between 30 and 50 Nm to be fully tightened, with some Campagnolo and Shimano units taking up to 70.
Rolla is offline  
Old 07-27-21, 02:12 PM
  #18  
2_i 
Senior Member
 
Join Date: Sep 2005
Location: Michigan
Posts: 3,693

Bikes: Trek 730 (quad), 720 & 830, Bike Friday NWT, Brompton M36R & M6R, Dahon HAT060 & HT060, ...

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 834 Post(s)
Liked 332 Times in 247 Posts
Originally Posted by robertj298
Could they be tightened too much? I have the axle and bearings removed cup seemed tightened pretty tight.
All the ones I relubed before I tightened them just enough so there was no no play in the axle but they
still turn freely
I think psychologically it is difficult to go to the other side, but of course it is principally possible. You begin to destroy the threads then and shards of metal begin to come off. Yes, it begins to be loose then too, but the usual owner doing maintenance would not go there. The way you can test where you are is to ride and listen to the squeaking, while carrying a wrench. Then you tighten a bit more and listen do the squeaking. If yes, you are likely on the right track. Presumably a chainring that was removed and not put back tightly enough could generate a squeaking too. In that case the squeaking would depend on the ring you were on. Note that that legs can generate far greater forces than hands can. What might seem tight for the hands, might not be such for the legs.
2_i is offline  
Old 07-27-21, 03:52 PM
  #19  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Originally Posted by 2_i
I think psychologically it is difficult to go to the other side, but of course it is principally possible. You begin to destroy the threads then and shards of metal begin to come off. Yes, it begins to be loose then too, but the usual owner doing maintenance would not go there. The way you can test where you are is to ride and listen to the squeaking, while carrying a wrench. Then you tighten a bit more and listen do the squeaking. If yes, you are likely on the right track. Presumably a chainring that was removed and not put back tightly enough could generate a squeaking too. In that case the squeaking would depend on the ring you were on. Note that that legs can generate far greater forces than hands can. What might seem tight for the hands, might not be such for the legs.
That would be kind of a pain because you have to remove the crank to tighten the bottom bracket. I am stumped.
I would have swore it was the bottom bracket. It only makes the squeak when pressure is applied to the pedal it lets up until
pressure is applied to the other pedal .I've probably serviced 10 bottom brackets before and have never had any issue. I changed
both pedals also.
robertj298 is offline  
Old 07-27-21, 04:19 PM
  #20  
robertj298 
Senior Member
Thread Starter
 
robertj298's Avatar
 
Join Date: Jun 2018
Location: NW Ohio
Posts: 1,139

Bikes: 1983 Univega Super Strada, 1986 Panasonic DX5000, 1984 Fuji Team 85 Univega Gran Turismo, 1984 Lotus Unique, 1987 Centurion Expert, 1987 Centurion Ironman Master,

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 676 Post(s)
Liked 447 Times in 181 Posts
Problem solved. Of all the stupid things it was something simple. The rear wheel wasn't
locked in tight so when pressure was put on either pedal the wheel would move slightly
rubbing against either the brake or chain stay. It would move back when there was no
pressure. I feel so stupid lol
robertj298 is offline  
Likes For robertj298:
Old 07-27-21, 04:25 PM
  #21  
Crankycrank
Senior Member
 
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,649
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 835 Post(s)
Liked 1,053 Times in 739 Posts
Originally Posted by robertj298
Problem solved. Of all the stupid things it was something simple. The rear wheel wasn't
locked in tight so when pressure was put on either pedal the wheel would move slightly
rubbing against either the brake or chain stay. It would move back when there was no
pressure. I feel so stupid lol
We've probably all went through something like this before. Tracking down noises can be a real biotch and often nowhere near where you think its coming from.
Crankycrank is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.