Can't seem to find this tool... Shimano TL-3S20
11-13-20, 02:34 PM
#1
Newbie
Thread Starter
Join Date: Jan 2015
Posts: 18
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Likes: 0
Liked 3 Times
in
2 Posts
Can't seem to find this tool... Shimano TL-3S20
Does anyone have this for sale or rent (w/ deposit and shipping $)???
Need it to repair my shimano 333 hub and can't seem to track one down
Need it to repair my shimano 333 hub and can't seem to track one down
11-13-20, 04:15 PM
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
PM sent. Andy
__________________
AndrewRStewart
AndrewRStewart
04-04-22, 08:34 PM
#4
Senior Member
04-04-22, 10:44 PM
#5
Junior Member
04-07-22, 02:00 PM
#6
Senior Member
Took a look through the bike junk, couldn't find one of the tools yet. Pretty sure I have several, and at least one cosmetically challenged one that I could sell for less. I'll take a look again this weekend. If you get to ten posts shoot me a PM to remind me.
07-05-22, 09:35 AM
#8
Newbie
Join Date: Jul 2022
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello Fellow Bikers! I just bought a late 50's 3 speed Katakura silk Porta-cycle. It's in real good condition but needs a spoke and a cleaning. wesmamyke You have one of the tools i need to disassemble it. Would you sell it to me? I live in alberta canada. Thanks.
07-05-22, 11:28 AM
#9
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,073
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,857 Times
in
2,305 Posts
Are you sure the hub you have on the late 1950s bike is a Shimano 333? I was under the impression that the 333 hubs came out in the later 1960s. My general rule (with other than SA AW hubs) is to not take them apart if they are working. A thorough washing through of solvent and oil is all that most would need. Most of the IGH hubs of that era are oil lubed, not grease.
__________________
AndrewRStewart
AndrewRStewart
07-05-22, 12:21 PM
#10
Newbie
Join Date: Jul 2022
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm not to sure of the date on the bike. I'll have to look closer but it is a 333. It still works good so ill give it a cleaning and use some proper oil. Thanks for the reply!.
