ISO and for trade thread part 5
09-09-21, 05:12 PM
#4201
Senior Member
I have been rebuilding my Sears fleet and expanding it with purchases so am in need. Yes, Sears.
a set of black grips that were common on 70’s models. I have brown ones so ONLY need a black set. Don’t want to substitute.
What do you want?
Looks like this...
And this. Dirty, moldy okay. No sun baked bubble ones.
a set of black grips that were common on 70’s models. I have brown ones so ONLY need a black set. Don’t want to substitute.
What do you want?
Looks like this...
And this. Dirty, moldy okay. No sun baked bubble ones.
09-09-21, 07:38 PM
#4202
Cat 6
Join Date: Dec 2007
Location: Mountain Brook, AL
Posts: 7,482
Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 183 Times
in
118 Posts
2 swap opportunities
Have: Campy Record one-bolt fluted seatpost 27.2
Need: Same in 27.0
Have: Cinelli 1A 26.4 stem 100mm
Need: Same in 120mm
Neither are show quality, but in reasonable shape for age. The stem, though with a little rust on the quill bolt, is the better of the two. The post has some marks below, and even a lug outline above the minimum insertion line.
Swap one or both. CONUS only please.
Have: Campy Record one-bolt fluted seatpost 27.2
Need: Same in 27.0
Have: Cinelli 1A 26.4 stem 100mm
Need: Same in 120mm
Neither are show quality, but in reasonable shape for age. The stem, though with a little rust on the quill bolt, is the better of the two. The post has some marks below, and even a lug outline above the minimum insertion line.
Swap one or both. CONUS only please.
09-10-21, 01:04 PM
#4203
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
noobinsf , I have a few of these types of washers, but I do not know what size you are looking for., or if what you need is specific for that caIiper. I can measure the outside and inside diameters, and thickness, if you can tell us what you need, I may be able to help. I can post pics here.
09-10-21, 04:18 PM
#4204
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,107
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 852 Post(s)
Liked 1,433 Times
in
815 Posts
noobinsf , unfortunately, the washers I have do not match up with yours. The inner diameter is too small and the depth is too large. When I saw your pictures I knew they were not going to match, but I measured them and it seems to me, they are just too far off from what you are looking for. Sorry I could not be of help.
Likes For delbiker1:
09-10-21, 05:07 PM
#4205
Senior Member
Join Date: Sep 2005
Location: Oakland, CA
Posts: 3,265
Bikes: '82 Univega Competizione, '72 Motobecane Grand Record, '83 Mercian KOM Touring, '85 Univega Alpina Uno, '76 Eisentraut Limited
Mentioned: 57 Post(s)
Tagged: 0 Thread(s)
Quoted: 1088 Post(s)
Liked 1,205 Times
in
701 Posts
noobinsf , unfortunately, the washers I have do not match up with yours. The inner diameter is too small and the depth is too large. When I saw your pictures I knew they were not going to match, but I measured them and it seems to me, they are just too far off from what you are looking for. Sorry I could not be of help.
09-10-21, 05:13 PM
#4206
Mother Nature's Son
Join Date: Mar 2016
Location: Sussex County, Delaware
Posts: 3,107
Bikes: 2014 Orbea Avant MD30, 2004 Airborne Zeppelin TI, 2003 Lemond Poprad, 2001 Lemond Tourmalet, 2014? Soma Smoothie
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 852 Post(s)
Liked 1,433 Times
in
815 Posts
noobinsf , that's awesome. I was going to stop by my LBS tomorrow to see if they had any in all the stuff they have stashed. I have a good relationship with them and have found such things there in the past that they let me have gratis. I am glad it worked out for you.
Likes For delbiker1:
09-10-21, 09:50 PM
#4207
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,913
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
I have a 1985 Gitane Champion completely built up (less tires and bar tape)
Oh, and the rear derailleur won't work! Seems PO had a loose bolt on the RD that cause the tension sprint to twist up. I can't just switch to a Suntour or Shimano RD as the drop out hanger takes a smaller bolt and I'll strip the threads in the hanger. RD is a Sachs-Huret "Eco" model also shown sometimes as a Huret Eco. I am going to try to find a way to bend another tension spring to fit, but not holding my breath.
I added a photo of my actual RD and one from the 'net. Mine doesn't have the hook attachment but it's the same RD. The photo is of one for sale in Holland but there it's $7 and $50 for shipping!
** I just need the spring though if you'd prefer to trade the whole RD, I'm in
Can trade a set of Sachs Huret LUX AS double Shifters. These are NOS
Oh, and the rear derailleur won't work! Seems PO had a loose bolt on the RD that cause the tension sprint to twist up. I can't just switch to a Suntour or Shimano RD as the drop out hanger takes a smaller bolt and I'll strip the threads in the hanger. RD is a Sachs-Huret "Eco" model also shown sometimes as a Huret Eco. I am going to try to find a way to bend another tension spring to fit, but not holding my breath.
I added a photo of my actual RD and one from the 'net. Mine doesn't have the hook attachment but it's the same RD. The photo is of one for sale in Holland but there it's $7 and $50 for shipping!
** I just need the spring though if you'd prefer to trade the whole RD, I'm in
Can trade a set of Sachs Huret LUX AS double Shifters. These are NOS
09-11-21, 08:22 AM
#4208
Senior Member
Join Date: Feb 2020
Posts: 2,812
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Likes: 0
Liked 1,326 Times
in
782 Posts
I have a 1985 Gitane Champion completely built up (less tires and bar tape)
Oh, and the rear derailleur won't work! Seems PO had a loose bolt on the RD that cause the tension sprint to twist up. I can't just switch to a Suntour or Shimano RD as the drop out hanger takes a smaller bolt and I'll strip the threads in the hanger. RD is a Sachs-Huret "Eco" model also shown sometimes as a Huret Eco. I am going to try to find a way to bend another tension spring to fit, but not holding my breath.
I added a photo of my actual RD and one from the 'net. Mine doesn't have the hook attachment but it's the same RD. The photo is of one for sale in Holland but there it's $7 and $50 for shipping!
** I just need the spring though if you'd prefer to trade the whole RD, I'm in
Can trade a set of Sachs Huret LUX AS double Shifters. These are NOS
Oh, and the rear derailleur won't work! Seems PO had a loose bolt on the RD that cause the tension sprint to twist up. I can't just switch to a Suntour or Shimano RD as the drop out hanger takes a smaller bolt and I'll strip the threads in the hanger. RD is a Sachs-Huret "Eco" model also shown sometimes as a Huret Eco. I am going to try to find a way to bend another tension spring to fit, but not holding my breath.
I added a photo of my actual RD and one from the 'net. Mine doesn't have the hook attachment but it's the same RD. The photo is of one for sale in Holland but there it's $7 and $50 for shipping!
** I just need the spring though if you'd prefer to trade the whole RD, I'm in
Can trade a set of Sachs Huret LUX AS double Shifters. These are NOS
b) looks to me as if the same spring was used in the Alvit and possibly some other Hurets. I think I have both an Alvit and a Challenger (similar to yours) and will check.
09-11-21, 01:22 PM
#4209
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
ISO a Suntour AR front derailleur:
I have a butt ugly rusty functional version, but I would like to do better. Have stuff to trade or buy.
I have a butt ugly rusty functional version, but I would like to do better. Have stuff to trade or buy.
09-11-21, 01:35 PM
#4210
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,913
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
oneclick Alas, genius that I am I snapped the old one. I heated it and tried to bend and snap....
09-11-21, 01:37 PM
#4211
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,772
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2434 Post(s)
Liked 3,107 Times
in
1,957 Posts
I had this for sale a while back.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
Likes For jdawginsc:
09-11-21, 01:43 PM
#4212
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,913
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
oneclick Alas, genius that I am I snapped the old one. I heated it and tried to bend and snap....
09-12-21, 06:04 PM
#4213
Senior Member
09-12-21, 06:14 PM
#4214
PM me your cotters
Join Date: Jun 2015
Location: ATL
Posts: 3,241
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 1137 Post(s)
Liked 588 Times
in
420 Posts
If anyone fails you on the AR front, gimme a shout. I'm pretty sure I've got what you need also.
Longshot here, but I'm looking to convert, apply or build a decent 8/9/10 speed capable 26" wheelset 100/135. Got two ways to accomplish:
End goal is going 1x10 or 1x11 on this bike, to which point, if you have a suitable 10s/11s capable crank to go with the wheel stuff ....
Longshot here, but I'm looking to convert, apply or build a decent 8/9/10 speed capable 26" wheelset 100/135. Got two ways to accomplish:
- Find someone with a spare 36H Shimano FH-RM40-8 hub
- An 8-speed freehub that fits RM40-8 rear hub, it looks like I can retrofit, I've got the extra 5mm available
End goal is going 1x10 or 1x11 on this bike, to which point, if you have a suitable 10s/11s capable crank to go with the wheel stuff ....
__________________
███████████████
███████████████
Likes For malcala622:
09-14-21, 11:25 AM
#4220
Senior Member
Join Date: Sep 2011
Location: Baltimore MD
Posts: 3,331
Bikes: '72 Motobecane Grand Record, '72 Gitane tandem, '72 Raleigh Super Course, '73 Raleigh Gran Sport, '73 Colnago Super, '76 Fiorelli Coppi, '78 Raleigh SBDU Team Pro, '78 Trek 930, '81 Holdsworth Special 650B, '86 Masi GC, ’94 Bridgestone RB-T
Mentioned: 67 Post(s)
Tagged: 0 Thread(s)
Quoted: 786 Post(s)
Liked 517 Times
in
280 Posts
09-14-21, 08:57 PM
#4222
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,573
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1440 Post(s)
Liked 1,055 Times
in
782 Posts
Force I do have a pair of Franco Italia drop bars, these are 40cm and per my digital calipers the clamp dia. is 25.27mm. If these sound like the ticket, PM me. I just happen to have a perfect box to ship them.
09-15-21, 10:10 AM
#4223
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,913
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1794 Post(s)
Liked 2,328 Times
in
1,375 Posts
Bumping me search for a spring for my Huret Eco RD.
Top photo shows my RD and bottom shows actual spring Ineed.
** It will take pretty much any spring from any Sach Huret RD as they were all very similar
Top photo shows my RD and bottom shows actual spring Ineed.
** It will take pretty much any spring from any Sach Huret RD as they were all very similar
09-15-21, 04:00 PM
#4224
PM me your cotters
Join Date: Jun 2015
Location: ATL
Posts: 3,241
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 1137 Post(s)
Liked 588 Times
in
420 Posts
I have quite a number of these RD. I don't often check this thread. I may need to dig to find a mech that's "parts worthy" but definitely have something.
__________________
███████████████
███████████████
09-15-21, 04:54 PM
#4225
Senior Member
Join Date: Mar 2009
Location: Houston, Tx
Posts: 323
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
In search of a Rivendell Silver thumb shifter mount. What Riv calls 'shifter mount X' - to mount a shifter on the outside of the left side of the handlebar or inside of the right side of the handlebar. Anyone got one? Thanks!