ISO and for trade thread part 5
#2526
Senior Member
Join Date: Jul 2004
Location: Twin Cities
Posts: 927
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 206 Post(s)
Liked 102 Times
in
46 Posts
Thanks, people! I got two responses for the above cable guide. Should be good.
__________________
Some days, it's not even worth gnawing through the restraints.
Some days, it's not even worth gnawing through the restraints.
#2527
Senior Member
After waiting more than a month for a new crown race and bottom cup for my mercier 300 to fix my either too lose or binding headset woes it appears the upper cups are the problem.
ISO: french threaded headset, excellent mechanical condition. Stack height of 35mm, plus or minus a mm. Currently there is a stronglight p3 on there.
ISO: french threaded headset, excellent mechanical condition. Stack height of 35mm, plus or minus a mm. Currently there is a stronglight p3 on there.
#2529
Junior Member
I'm looking for two purple anodized water bottle cages. Can't believe these aren't commonly available any more! Does anyone have a couple kicking around?
#2530
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,183
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,354 Times
in
716 Posts
#2531
Junior Member
#2532
verktyg
Join Date: Jul 2006
Location: SF Bay Area
Posts: 4,030
Bikes: Current favorites: 1988 Peugeot Birraritz, 1984 Gitane Super Corsa, 1980s DeRosa, 1981 Bianchi Campione Del Mondo, 1992 Paramount OS, 1988 Colnago Technos, 1985 RalieghUSA SBDU Team Pro
Mentioned: 207 Post(s)
Tagged: 0 Thread(s)
Quoted: 1036 Post(s)
Liked 1,238 Times
in
654 Posts
Peugeot Blue & Yellow Frame On OfferUp
verktyg I know its not your size but just for kicks thought I'd post it. Check out this Peugeot PLX 10 1955-58 Reynolds for $1200 on OfferUp https://offerup.co/lAgJ4xCqM6
It's awfully "spendy". I'm looking for a complete bike because piecing together all the vintage parts can more than double the cost.
I've seen whole bikes like this for only a little more $$$$. It just a Peugeot!
Who ever said that C&Vers aren't cheap!
verktyg
__________________
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
Don't believe everything you think! History is written by those who weren't there....
Chas. ;-)
#2533
Full Member
Looking for a 24.0 seatpost for a Peugeot HLE frame. I'm trying to get a budget build together, so condition is not an issue so long as the post is usable.
#2534
Member
Looking for a French threaded fork w/ 140mm steerer to fit Motobecane Mirage. Not sure what year it was manufactured.
#2535
Senior Member
Join Date: Apr 2007
Location: Ottawa, Canada
Posts: 777
Bikes: Raleigh Classic 15, 84; Miyata 912, 85; Miyata Ridge Runner SE, 85; Miyata 610, 86; Miyata 100M, 86; Miyata Valley Runner, 88; Miyata Triple Cross, 89; GT Karakoram, 90; Miyata Elevation 300, 91; Marinoni Touring, 95; Long Haul Trucker, 2013
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 133 Times
in
80 Posts
#2536
Senior Member
Join Date: Nov 2013
Location: Big Apple
Posts: 1,428
Bikes: yes
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Likes: 0
Liked 409 Times
in
176 Posts
I've got two of those Lezyne cages in purple. I got them for a purple Trek 760, but they didn't quite match, so I went with silver.
Anyway, they're off the package cardboard, but unused. PM me if interested.
Anyway, they're off the package cardboard, but unused. PM me if interested.
Last edited by Vintage_Cyclist; 05-27-20 at 11:35 AM.
#2537
Senior Member
Join Date: Dec 2005
Posts: 17,155
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3808 Post(s)
Liked 6,683 Times
in
2,609 Posts
Likes For nlerner:
#2538
Senior Member
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,183
Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso
Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1199 Post(s)
Liked 1,354 Times
in
716 Posts
@eeuuugh I'd jump on those cages from vintage cyclist. It'll be a few hours before I can check for you.
Ride safe
Update: No dice on the cages from Pats605. They have limited stock these days.
Ride safe
Update: No dice on the cages from Pats605. They have limited stock these days.
Last edited by malcala622; 05-27-20 at 04:40 PM.
Likes For malcala622:
#2539
Senior Member
Join Date: May 2012
Location: Point Reyes Station, California
Posts: 4,527
Bikes: Indeed!
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 1507 Post(s)
Liked 3,469 Times
in
1,131 Posts
5 Complete Links of Regina Chain Wanted. Found! Thanks to Mad Honk.
Yep, just 5 links to extend a chain that is too short for my Olmo project.
The chain I have is the black "Super Corsa," marked "Regina SC," but I would be happy with any older Non-oro Regina chain.
I have a multitude of small trade items of similar vintage to the chain I seek; Campy crank bolts, dropout adjuster screws, cable clips, chainring bolts, Regina cogs, etc.
Brent
Yep, just 5 links to extend a chain that is too short for my Olmo project.
The chain I have is the black "Super Corsa," marked "Regina SC," but I would be happy with any older Non-oro Regina chain.
I have a multitude of small trade items of similar vintage to the chain I seek; Campy crank bolts, dropout adjuster screws, cable clips, chainring bolts, Regina cogs, etc.
Brent
Last edited by obrentharris; 05-28-20 at 06:50 PM.
#2540
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,390 Times
in
2,092 Posts
Putting these ISOs out for a friend and also so I can finish up some pending projects:
Got something? Send me a PM.
-Kurt
- For the Velo Yellow kids ex-track bikes that I'm building for work:
- Three 26.8mm seatposts. Must NOT be fluted. Can be on the short side. Nothing fancy - just something stuff that'll do the job.
- Three 110BCD chainrings - can be any combination of 38t, 39, or 40t.
- Three decent-enough rear axle mount kickstands. Must work, but length unimportant, as I'll be cutting them down.
- For a friend of mine who just found a nice 28h White Industries hub and is looking to lace something into it:
- Some sort of interesting, 1980's/90s era 700C clincher rim, 28h. Knowing him, I think something polished would be ideal - and I think something like a mid-V Campagnolo Lambda or Vento would be right up his alley.
Got something? Send me a PM.
-Kurt
#2541
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
74BCD
Seeking a 38/39/40 tooth chainwheel
(also seeking a 24/26 tooth chainwheel same BCD
Will pay for chainwheel(s) and the shipping as I live in Canada and prohibitive with shipping to trade
Seeking a 38/39/40 tooth chainwheel
(also seeking a 24/26 tooth chainwheel same BCD
Will pay for chainwheel(s) and the shipping as I live in Canada and prohibitive with shipping to trade
#2542
Senior Member
You're looking for a 74BCM 40 tooth chainwheel? Wow, I didn't know those existed. I can help with the smaller rings but assuming this is going on a triple crankset I would assume the bigger rings would be 110 BCD or something.
#2543
Senior Member
Join Date: Feb 2020
Posts: 2,819
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,326 Times
in
782 Posts
What I'd REALLY LIKE (is everyone listening?) is a left side 170mm Triomphe crank.
Send me your postal address. You can have the ring. I get karma.
Get me a crank and you get karma too.
#2544
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
oneclick
Pm sent for the 24 tooth.,
Thank you!!
Iowegian
I have an SR Apex small bolt circle crankset that is 50/44/30 rings and with a 74 BCD. I can put the 44 on the outside and the 30 on the inside with the 24 on the inner which will be 44/30/24. It may not look like much but since I usually ride my doubles on the small tooth (usually 39 tooth) except on downhills, I can't see having a large chainwheel, especially with a heavy load. I'd prefer a 38/39/40 tooth large ring instead of the 44 tooth but a 44 is still slightly better than a 48, especially for shifting. Still, I'll keep looking for a 38/39/40 tooth.
Pm sent for the 24 tooth.,
Thank you!!
Iowegian
I have an SR Apex small bolt circle crankset that is 50/44/30 rings and with a 74 BCD. I can put the 44 on the outside and the 30 on the inside with the 24 on the inner which will be 44/30/24. It may not look like much but since I usually ride my doubles on the small tooth (usually 39 tooth) except on downhills, I can't see having a large chainwheel, especially with a heavy load. I'd prefer a 38/39/40 tooth large ring instead of the 44 tooth but a 44 is still slightly better than a 48, especially for shifting. Still, I'll keep looking for a 38/39/40 tooth.
Last edited by WGB; 05-30-20 at 08:36 PM.
#2545
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,729
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,402 Times
in
1,203 Posts
Wow, SR Apex also came in an all-74 BCD configuration? Who knew?
I have the 86 BCD triple version, and it’s great. Have seen the larger BCD version, but never one that was all 74.
Could you post a few pics?
I have the 86 BCD triple version, and it’s great. Have seen the larger BCD version, but never one that was all 74.
Could you post a few pics?
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...
#2546
multimodal commuter
Join Date: Nov 2006
Location: NJ, NYC, LI
Posts: 19,808
Bikes: 1940s Fothergill, 1959 Allegro Special, 1963? Claud Butler Olympic Sprint, Lambert 'Clubman', 1974 Fuji "the Ace", 1976 Holdsworth 650b conversion rando bike, 1983 Trek 720 tourer, 1984 Counterpoint Opus II, 1993 Basso Gap, 2010 Downtube 8h, and...
Mentioned: 584 Post(s)
Tagged: 0 Thread(s)
Quoted: 1908 Post(s)
Liked 574 Times
in
339 Posts
#2547
WGB
Join Date: Jul 2017
Location: Niagara Region
Posts: 2,917
Bikes: Panasonic PT-4500
Mentioned: 46 Post(s)
Tagged: 0 Thread(s)
Quoted: 1799 Post(s)
Liked 2,334 Times
in
1,378 Posts
#2548
Senior Member
Join Date: Feb 2020
Posts: 2,819
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1106 Post(s)
Likes: 0
Liked 1,326 Times
in
782 Posts
Sheldon say only 74, no 76. You're good.
Wait a sec, that's not BCD you're measuring.
You're measuring the diagonal of a pentagon. If it *is* 74mm, you've got a bolt circle diameter of 2x 38.904, or just under 78mm. That makes no sense either.
Measure one-hole-to-the-next, and use his chart:
https://www.sheldonbrown.com/cribsheet-bcd.html
It may be that the ring I sent you will not fit; oh well.
Wait a sec, that's not BCD you're measuring.
You're measuring the diagonal of a pentagon. If it *is* 74mm, you've got a bolt circle diameter of 2x 38.904, or just under 78mm. That makes no sense either.
Measure one-hole-to-the-next, and use his chart:
https://www.sheldonbrown.com/cribsheet-bcd.html
It may be that the ring I sent you will not fit; oh well.
Last edited by oneclick; 05-30-20 at 06:21 PM.
#2549
www.theheadbadge.com
Join Date: Sep 2005
Location: Southern Florida
Posts: 28,513
Bikes: https://www.theheadbadge.com
Mentioned: 124 Post(s)
Tagged: 0 Thread(s)
Quoted: 2422 Post(s)
Liked 4,390 Times
in
2,092 Posts
#2550
aka: Dr. Cannondale
Join Date: Jul 2009
Posts: 7,729
Mentioned: 234 Post(s)
Tagged: 0 Thread(s)
Quoted: 2152 Post(s)
Liked 3,402 Times
in
1,203 Posts
I’ma gonna guessa thatsa 86 bcd cranka setta.
__________________
Hard at work in the Secret Underground Laboratory...
Hard at work in the Secret Underground Laboratory...