Good 26mm Road Bars
#1
Newbie
Thread Starter
Join Date: Oct 2019
Location: Northern New Jersey
Posts: 53
Bikes: '15 Giant Propel Advanced SL1, '17 Trek Madone RSL
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 80 Times
in
15 Posts
Good 26mm Road Bars
I have a Trek 5200 circa 2000 that has 26mm bars. They are the old-fashion type that slopes down towards the hoods instead of being more level like modern bars. I find this to be really awkward / uncomfortable.
Does anyone have recommendations for a 26mm bar that would be shaped a little more like modern bars? I find it hard to get a good sense of the shape from pictures online…
It's an old bike so I am just looking to spend in the neighborhood of $50.
Does anyone have recommendations for a 26mm bar that would be shaped a little more like modern bars? I find it hard to get a good sense of the shape from pictures online…
It's an old bike so I am just looking to spend in the neighborhood of $50.
#2
Jedi Master
#3
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,984
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6191 Post(s)
Liked 4,807 Times
in
3,316 Posts
Modern? I just thought they were slightly different styles to fit slightly different tastes and needs of the rider. I thought we had them BITD and they were modern then.
Whatever you get, you need to make sure you get the correct reach and drop for you. All the modern in the world won't help if you get those wrong.
But if you are going to only be on the bike for 20 minutes to an hour, I suppose anything will work if it makes the bike look good and you "feel" good about it.
Whatever you get, you need to make sure you get the correct reach and drop for you. All the modern in the world won't help if you get those wrong.
But if you are going to only be on the bike for 20 minutes to an hour, I suppose anything will work if it makes the bike look good and you "feel" good about it.
#4
Newbie
Thread Starter
Join Date: Oct 2019
Location: Northern New Jersey
Posts: 53
Bikes: '15 Giant Propel Advanced SL1, '17 Trek Madone RSL
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 29 Post(s)
Likes: 0
Liked 80 Times
in
15 Posts
Thanks...those look like what I am looking for...especially the M177.
I see that Nitto also has an M184 that looks really too good but does cost twice as much...I'll have to think it over.
I see that Nitto also has an M184 that looks really too good but does cost twice as much...I'll have to think it over.
#5
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,610
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,483 Times
in
4,185 Posts
https://www.somafab.com/archives/product/highway-1-bar
comes in black or silver. modern compact bend with the drops extending back a bit too. ive owned 3 sets of them and still have 1 on a bike. hoods can be mounted level with the ramps.
comes in black or silver. modern compact bend with the drops extending back a bit too. ive owned 3 sets of them and still have 1 on a bike. hoods can be mounted level with the ramps.
Likes For mstateglfr:
#6
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
https://www.somafab.com/archives/product/highway-1-bar
comes in black or silver. modern compact bend with the drops extending back a bit too. ive owned 3 sets of them and still have 1 on a bike. hoods can be mounted level with the ramps.
comes in black or silver. modern compact bend with the drops extending back a bit too. ive owned 3 sets of them and still have 1 on a bike. hoods can be mounted level with the ramps.
I also have a set of Civia Emerson in 26 and they are nearly identical in shape, drop, reach, etc. to the HWY 1 bars. I can't remember but one or the other was a few grams heavier than the other, but very, very little difference.
Just did a quick web search and they might be discontinued. But if you find a pair, they are just like the HWY 1.
This is what the HWY1 and/or Emerson will look with modern shift/brake levers:
Likes For Camilo:
#7
Local 1212
I have a set of the HWY1 bars in 26 and they are an excellent example of the bars the OP is looking for. And they look nice and aren't expensive.
I also have a set of Civia Emerson in 26 and they are nearly identical in shape, drop, reach, etc. to the HWY 1 bars. I can't remember but one or the other was a few grams heavier than the other, but very, very little difference.
Just did a quick web search and they might be discontinued. But if you find a pair, they are just like the HWY 1.
This is what the HWY1 and/or Emerson will look with modern shift/brake levers:
I also have a set of Civia Emerson in 26 and they are nearly identical in shape, drop, reach, etc. to the HWY 1 bars. I can't remember but one or the other was a few grams heavier than the other, but very, very little difference.
Just did a quick web search and they might be discontinued. But if you find a pair, they are just like the HWY 1.
This is what the HWY1 and/or Emerson will look with modern shift/brake levers:
Likes For @work:
#9
Senior Member
Join Date: Apr 2007
Posts: 6,760
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 1109 Post(s)
Liked 1,200 Times
in
760 Posts
I have a set of the HWY1 bars in 26 and they are an excellent example of the bars the OP is looking for. And they look nice and aren't expensive.
I also have a set of Civia Emerson in 26 and they are nearly identical in shape, drop, reach, etc. to the HWY 1 bars. I can't remember but one or the other was a few grams heavier than the other, but very, very little difference.
Just did a quick web search and they might be discontinued. But if you find a pair, they are just like the HWY 1.
This is what the HWY1 and/or Emerson will look with modern shift/brake levers:
I also have a set of Civia Emerson in 26 and they are nearly identical in shape, drop, reach, etc. to the HWY 1 bars. I can't remember but one or the other was a few grams heavier than the other, but very, very little difference.
Just did a quick web search and they might be discontinued. But if you find a pair, they are just like the HWY 1.
This is what the HWY1 and/or Emerson will look with modern shift/brake levers:
I have my Emersons installed on a bike and could have taken a picture of it, but it's a dirty gravel bike and has bar end shifters in this particular iteration, so wouldn't be a good example of what the OP is looking for. I have the HWY1s in reserve for my next build.... soon I hope!
#10
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,952
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10421 Post(s)
Liked 11,882 Times
in
6,088 Posts
I have Highway Ones on 3 out of 6 bikes. In fact I just used one to replace a Cinelli Giro d'Italia - exactly the kind of downward sloping bar the OP described.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles