Go Back  Bike Forums > Bike Forums > General Cycling Discussion
Reload this Page >

My first bike in 37 years

Notices
General Cycling Discussion Have a cycling related question or comment that doesn't fit in one of the other specialty forums? Drop on in and post in here! When possible, please select the forum above that most fits your post!

My first bike in 37 years

Old 06-15-21, 07:53 AM
  #1  
passive jay
Senior Member
Thread Starter
 
Join Date: Jun 2021
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 45 Times in 14 Posts
My first bike in 37 years

Hello! Last rode a bike when I was 11, I turn 48 in a couple of months.

This is my sidewalk cruiser.

It started life as a cheap Genesis beach cruiser. I like the bike because it is one of the few I have found that is large enough for me (I am 6'7) so I decided to make it a bit nicer.

New seat and kickstand were no big deal but after riding it around for awhile I decided that hills suck. So I put on a Eagle 2 speed automatic kickback hub. It would not work with the stock wheel so I got a new rim/spokes. Other than the spoke pattern being different it matches up great.

So what do you guys think?


passive jay is offline  
Likes For passive jay:
Old 06-15-21, 07:55 AM
  #2  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
At 6'7", I'd guess that you have a 35-36" pants inseam. Isn't the saddle low for proper leg extension?
Phil_gretz is offline  
Old 06-15-21, 07:57 AM
  #3  
passive jay
Senior Member
Thread Starter
 
Join Date: Jun 2021
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 45 Times in 14 Posts
a little yes, but that is as far up as it goes. I am going to try it out like this for a while and if it feels too low I will look into finding a longer seat.. um...pipe? or whatever it is they call that.
passive jay is offline  
Old 06-15-21, 07:59 AM
  #4  
passive jay
Senior Member
Thread Starter
 
Join Date: Jun 2021
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 45 Times in 14 Posts
It is a fairly big bike with 29 inch wheels so that helps some.
passive jay is offline  
Old 06-15-21, 08:02 AM
  #5  
Phil_gretz
Zip tie Karen
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,006

Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times in 806 Posts
Seatpost. Measure the diameter accurately using digital calipers. Buying the replacement is easy and inexpensive on line, if you know the correct diameter.
Phil_gretz is offline  
Likes For Phil_gretz:
Old 06-15-21, 08:14 AM
  #6  
Speedway2
Senior Member
 
Speedway2's Avatar
 
Join Date: Oct 2018
Location: Thornhill, Canada
Posts: 747

Bikes: United Motocross BMX, Specialized Langster, Giant OCR, Marin Muirwoods, Globe Roll2, VROD:)

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 236 Post(s)
Liked 400 Times in 242 Posts
Looks good!
I personally would find a way to add a front hand brake. eg Sturmey Archer front drum brake hub. Virtually maintenance free and will handle your "load".
I have a 2-speed that keeps switching gears every time I apply back pedal (as designed) when braking.....drives me batty
Speedway2 is offline  
Old 06-15-21, 09:42 AM
  #7  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,768

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1935 Post(s)
Liked 2,148 Times in 1,312 Posts
Good job!

You might want to check out the Beach Cruiser subforum as you go forward with any modification ideas.

John
70sSanO is offline  
Old 06-15-21, 11:50 AM
  #8  
BikingViking793 
Senior Member
 
Join Date: Aug 2017
Location: Wisconsin
Posts: 527

Bikes: 2015 Felt Z75 Disc, 2008 Fuji Cross Comp, 2010 Trek Navigator 1.0, 1974 Raleigh Sports, 1974 Schwinn Le Tour, 1981 Schwinn Super Le Tour, Surly Cross Check, 2021 Giant Talon 2

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 202 Post(s)
Liked 71 Times in 60 Posts
Originally Posted by passive jay
Hello! Last rode a bike when I was 11, I turn 48 in a couple of months.

This is my sidewalk cruiser.

It started life as a cheap Genesis beach cruiser. I like the bike because it is one of the few I have found that is large enough for me (I am 6'7) so I decided to make it a bit nicer.

New seat and kickstand were no big deal but after riding it around for awhile I decided that hills suck. So I put on a Eagle 2 speed automatic kickback hub. It would not work with the stock wheel so I got a new rim/spokes. Other than the spoke pattern being different it matches up great.

So what do you guys think?


nice. You will enjoy riding!
__________________
check out the Frugal Average Bicyclist
Frugal Average Bicyclist – The goal here is to help you keep cycling on a budget.
BikingViking793 is offline  
Old 06-15-21, 02:39 PM
  #9  
Milton Keynes
Senior Member
 
Milton Keynes's Avatar
 
Join Date: May 2016
Posts: 3,947

Bikes: Trek 1100 road bike, Roadmaster gravel/commuter/beater mountain bike

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 2281 Post(s)
Liked 1,710 Times in 936 Posts
I think I'd personally want the handlebars rotated down a bit. It looks like it'd be a bit awkward holding onto them at that angle.
Milton Keynes is offline  
Old 06-16-21, 05:31 AM
  #10  
livedarklions
Tragically Ignorant
 
livedarklions's Avatar
 
Join Date: Jun 2018
Location: New England
Posts: 15,613

Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,094 Times in 5,053 Posts
Riding that type of bike can be a lot of fun for street riding. I had slick tires on mine which I found to be super comfortable and relatively fast.
livedarklions is offline  
Old 06-16-21, 01:56 PM
  #11  
passive jay
Senior Member
Thread Starter
 
Join Date: Jun 2021
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 45 Times in 14 Posts
i might have to move it but for now it seems ok, being very tall l need the bars as high up as I can get them
passive jay is offline  
Old 06-16-21, 04:02 PM
  #12  
freeranger
Senior Member
 
freeranger's Avatar
 
Join Date: Jun 2005
Location: Kentucky
Posts: 2,576

Bikes: 06 Lemond Reno, 98 GT Timberline mtn.bike

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 418 Post(s)
Liked 688 Times in 429 Posts
Originally Posted by passive jay
i might have to move it but for now it seems ok, being very tall l need the bars as high up as I can get them
It might look odd, but there are "ape hanger" bars made for bicycles. You may have seen them on motorcycles. They would get that bar height up there.
freeranger is offline  
Old 06-16-21, 09:07 PM
  #13  
guachi
Senior Member
 
Join Date: May 2019
Posts: 520
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 229 Post(s)
Liked 327 Times in 179 Posts
What do I think?

I think you'll like cycling so much you'll be back here in six months asking what road bike to buy for your first century.
guachi is offline  
Likes For guachi:
Old 06-17-21, 01:47 PM
  #14  
passive jay
Senior Member
Thread Starter
 
Join Date: Jun 2021
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 40 Post(s)
Liked 45 Times in 14 Posts
Originally Posted by freeranger
It might look odd, but there are "ape hanger" bars made for bicycles. You may have seen them on motorcycles. They would get that bar height up there.
I have looked at some of them but I was concerned it would put my arms in a position that made pedaling awkward
passive jay is offline  
Old 06-17-21, 01:55 PM
  #15  
livedarklions
Tragically Ignorant
 
livedarklions's Avatar
 
Join Date: Jun 2018
Location: New England
Posts: 15,613

Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,094 Times in 5,053 Posts
Originally Posted by passive jay
i might have to move it but for now it seems ok, being very tall l need the bars as high up as I can get them
If you're comfortable, don't screw with them.

Mostly, these bikes are about fun. The way you have the handlebars makes the bike look happy.

I suspect ape hangers will make you miserable, btw.

Last edited by livedarklions; 06-17-21 at 01:58 PM.
livedarklions is offline  
Old 06-19-21, 10:32 AM
  #16  
probe1957
Full Member
 
Join Date: Mar 2009
Location: Central IL
Posts: 437

Bikes: 2020 Scott Speedster 10 Disc

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Liked 37 Times in 27 Posts
I think it's cool.
probe1957 is offline  
Old 06-20-21, 11:48 PM
  #17  
SkinGriz
Live not by lies.
 
Join Date: Nov 2020
Posts: 1,306

Bikes: BigBox bikes.

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 860 Post(s)
Liked 784 Times in 582 Posts
I like it.
SkinGriz is offline  
Old 06-21-21, 05:51 AM
  #18  
Viich
Hack
 
Join Date: Sep 2015
Location: Ottawa, Ontario, Canada
Posts: 1,251

Bikes: TrueNorth CX bike, 88 Bianchi Strada (currently Sturmey'd), 90's Giant Innova (now with drop bars), Yess World Cup race BMX, Redline Proline Pro24 race BMX Cruiser

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 343 Post(s)
Liked 181 Times in 127 Posts
Originally Posted by passive jay
I have looked at some of them but I was concerned it would put my arms in a position that made pedaling awkward
BMX bars would be another option.
Viich is online now  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.