Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Easily Achieving 125 PSI - My Approach/Experience

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Easily Achieving 125 PSI - My Approach/Experience

Old 06-18-22, 02:10 PM
  #1  
blinky
senior member
Thread Starter
 
Join Date: Oct 2005
Location: Connecticut
Posts: 373

Bikes: 2003 Litespeed Tuscany with Ultegra R-8000 components

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Liked 40 Times in 35 Posts
Easily Achieving 125 PSI - My Approach/Experience

As I get older achieving 125psi with my old trusty Specialized floor pump got impossible and even 100psi was a bit of a struggle - my solution and the tools -
  • 1 1/2 gallon Craftsman compressor ( max psi is 125 )
  • old gas station brass schrader ball chuck
  • 25 foot rubber hose ( 3/8 inch )
  • brass presta to schrader screw on adapter
  • hand held pressure gauge
First tried the Park inflator , too heavy and other inflators just didn't hold the seal for my Presta valve - my Craftsman has a max of 125psi but there are others available from different companies including Craftsman that can achieve higher pressures - through the years I've picked up many adapters - hard to find brass ones these days , mostly cheap plastic - and have also collected a few hand held hand pressure gauges , mostly analog but one digital .

I'm sure this approach is used by many on this forum but wanted to get it out there for others that may be struggling with their high pressure needs - for on the road I have a very small inflator head by Silca and use screw on CO2 cartridges but the max pressure I get is about 80psi , which is enough to get me home most of the time .
blinky is offline  
Old 06-18-22, 03:12 PM
  #2  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
cxwrench is offline  
Likes For cxwrench:
Old 06-18-22, 03:22 PM
  #3  
Homebrew01
Super Moderator
 
Homebrew01's Avatar
 
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,845

Bikes: Old Steelies I made, Old Cannondales

Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 924 Times in 610 Posts
Why would you want 125 psi
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.

FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Homebrew01 is offline  
Old 06-18-22, 04:15 PM
  #4  
Iride01 
I'm good to go!
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 14,811

Bikes: Tarmac Disc Comp Di2 - 2020

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 6100 Post(s)
Liked 4,732 Times in 3,262 Posts
My 10 dollar Zefal that is over a dozen years old gets me to 125 psi easily if I want to go that high. I can probably get it to over 150 if I tried. If your pump gives you issues then probably it's bore is too large. Maybe it was made for a larger CFM air flow which from what I read is helpful for mounting tubeless tires.

The thing that occasionally gives me issues pumping up tires to any pressure is a presta valve core sticking and not opening at times when I unscrew it but forget to push on it briefly to loosen the sometimes sticky valve.

Another thing I've seen noobs with a floor pump do is stop when the air in the pump gets compressed but hasn't matched the pressure on the other side of the valve. It's that last little inch or so of pump travel that is left that will push the air into the tire. And the average persons body weight should overcome that easily.

Last edited by Iride01; 06-18-22 at 04:21 PM.
Iride01 is offline  
Likes For Iride01:
Old 06-18-22, 04:45 PM
  #5  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,003

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4172 Post(s)
Liked 3,792 Times in 2,271 Posts
What size CO2 cartridge are you using and what tire size are you filling with it. 80PSI might well be enough if you are running tires with an appropriate volume. But I wonder if you're not getting the entire CO2 in the tire. Have you tried a second cartridge to further top off the pressures? Remember that CO2 will bleed out of a tire much quicker that atmospheric air does. So an after the ride is over pressure check might reflect some bleed off

Pump/inflator head gromets do wear over time, as do pump pistons (be they leather or "O" rings) and most will see improvement with periodic cylinder lubing with a thick lube. The check valve, in most floor pump bases, can become clogged with crap and inhibit pressured air flow. Hose connections to the pump or to the chuck can leak. Back in the day all these were serviceable (and liked periodic servicing) but with today's pump designs and the lack of fixing stuff as a prime design goal most pumps are considered disposable by most riders once the pump become sup par.

To repeat Gabe's comment- what are the factors that lead you to "need" 125psi? Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Old 06-18-22, 05:20 PM
  #6  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,830

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4745 Post(s)
Liked 3,861 Times in 2,510 Posts
I lent my Zefal HP to a skinny middle aged roadie 45 years ago so he could pump his sewups up to 120 for the club TT. He did it easily. I doubt that would be harder with a modern HPX. I've never even wanted to ride that much pressure. But I've used those pumps to get 110- 115 psi many times. It isn't remotely a challenge.

Now if this is for seating tubeless, can't help you. Never tried and never ridden them.
79pmooney is online now  
Old 06-18-22, 05:40 PM
  #7  
Rolla
Guest
 
Join Date: Sep 2020
Posts: 2,888
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 1346 Post(s)
Liked 3,269 Times in 1,439 Posts
Originally Posted by Homebrew01
Why would you want 125 psi
Came here to say exactly that.
Rolla is offline  
Likes For Rolla:
Old 06-18-22, 08:21 PM
  #8  
rossiny
Senior Member
 
Join Date: Oct 2015
Location: SE Wisconsin
Posts: 781

Bikes: Trek 970, Bianchi Volpe,Casati

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 354 Post(s)
Liked 120 Times in 86 Posts
Pressure

This talk about pressure. Brings me back to the mid 80s. When we had sew-ups. We'd pump them up to over 120 psi, for the club rides when we were trying to be racers 😄😆. What were we 🤔 thinking..
Nowadays I switched over to touring bikes, old mountain bikes with fat tires, and I have 1 "fast" bike a Basso titanium that's enough...
I have a Park pump that can easily pump that kind of pressure if I should need it...
rossiny is offline  
Old 06-18-22, 08:33 PM
  #9  
t2p
Senior Member
 
Join Date: May 2022
Location: USA - Southwest PA
Posts: 2,981

Bikes: Cannondale - Gary Fisher - Giant - Litespeed - Schwinn Paramount - Schwinn (lugged steel) - Trek OCLV

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 1359 Post(s)
Liked 1,803 Times in 1,038 Posts

I have two Silca floor pumps - one with Hiro chuck/head update - they work great and will pump a skinny clincher to 120 psi

also have a 30 gallon air compressor with chuck

but most times when I inflate a tire I use a portable DeWalt inflator ; the DeWalt inflator maxes at 160 psi I believe

quick and easy

they cost around $100 - might be up to $110-120 now (?)
t2p is offline  
Old 06-18-22, 09:12 PM
  #10  
ofajen
Cheerfully low end
 
ofajen's Avatar
 
Join Date: Jun 2020
Posts: 1,965
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 642 Post(s)
Liked 1,040 Times in 663 Posts
Originally Posted by rossiny
This talk about pressure. Brings me back to the mid 80s. When we had sew-ups. We'd pump them up to over 120 psi, for the club rides when we were trying to be racers 😄😆. What were we 🤔 thinking..
During the 70s and 80s, I seem to recall I ran 300g road tubulars at around 90psi in the rear and 80ish in the front.

These days I stay off the roads and run clincher 32s at about 55 psi on crushed stone trails.

Otto
ofajen is offline  
Old 06-19-22, 10:00 AM
  #11  
blinky
senior member
Thread Starter
 
Join Date: Oct 2005
Location: Connecticut
Posts: 373

Bikes: 2003 Litespeed Tuscany with Ultegra R-8000 components

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 145 Post(s)
Liked 40 Times in 35 Posts
Thanks everyone for your time and input - I set the compressor at its' upper limit of 125 psi for the test run - my tires are 700x25C and 90-100psi is more than enough for me but I know there is someone who likes 140psi and I've heard of someone who can muscle out those pressures with a frame pump - my Specialized floor pump is probably 15-20 years old and has been left in the garage through extreme Summer heat and Winter cold - it's never been refurbished or lubricated and that could account for it not performing well.

I know there are floor pumps now that are geared to high volume and others to high pressure - Topeak , Park , Specialized , Silca , Lezyne are names among many that make floor pumps - can anyone recommend a floor pump with flip lock preferred that will handle 90-110 psi pretty well ?
blinky is offline  
Old 06-19-22, 10:24 AM
  #12  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,642

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3431 Post(s)
Liked 2,826 Times in 1,723 Posts
I pump my Veloflex 700 x 23C tires to 140 psi. Before I came to this site, I did it because for me, the ride at that pressure feels awesome, but people here believe they know better. Now it’s fun to watch them spin their wheels and tell me I’m wrong to like what I like.

Anyway, sounds like the compressor idea is working for you. I use a Silca Pista Plus with the aforementioned Hiro chuck. The pump and chuck are expensive but worth it.
smd4 is offline  
Old 06-19-22, 12:09 PM
  #13  
Ogsarg
Senior Member
 
Join Date: Feb 2017
Location: Hollister, CA (not the surf town)
Posts: 1,724

Bikes: 2019 Specialized Roubaix Comp Di2, 2009 Roubaix, early 90's Giant Iguana

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 636 Post(s)
Liked 1,490 Times in 543 Posts
All of the pumps at the link below will go up to at least 120 with some claiming 200+. Naturally, the force required to pump is going to increase as you go higher in pressure. Not much you can do about that. Personally, I can't imagine running a pressure over 100 except for a very heavy rider or heavy load on skinny tires.

https://www.twowheelingtots.com/best...nd-adult-bike/
Ogsarg is offline  
Old 06-19-22, 12:44 PM
  #14  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,768
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,873 Times in 4,637 Posts
Originally Posted by smd4
I pump my Veloflex 700 x 23C tires to 140 psi. Before I came to this site, I did it because for me, the ride at that pressure feels awesome, but people here believe they know better.
If you ride exclusively on velodromes, yeah, it'll be awesome. Anywhere else, 140 psi will be slower, harsher-riding, and more puncture-prone. But it's your call.
Koyote is offline  
Likes For Koyote:
Old 06-19-22, 01:30 PM
  #15  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 22,625

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)

Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3868 Post(s)
Liked 2,560 Times in 1,574 Posts
^ and it begins again
__________________
Originally Posted by chandltp
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Likes For ThermionicScott:
Old 06-19-22, 01:36 PM
  #16  
phughes
Senior Member
 
phughes's Avatar
 
Join Date: Mar 2011
Posts: 3,064
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1020 Post(s)
Liked 1,251 Times in 723 Posts
Originally Posted by ThermionicScott
^ and it begins again
It began with the first post.
phughes is offline  
Likes For phughes:
Old 06-19-22, 01:42 PM
  #17  
cranky old road 
Let your bike be the tool
 
cranky old road's Avatar
 
Join Date: Jun 2006
Location: NC/SC border
Posts: 942

Bikes: '66 Raleigh Carlton, '70 Ron Cooper, '95 Bianchi CD'I, Zonal Frame with Xenon gruppo, Carbon Frame with Record Gruppo, Columbia Twosome, Terry Classic, Bianchi SX, Gravity SS/FG

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Liked 311 Times in 191 Posts
__________________
Never try to teach a pig to sing...
cranky old road is offline  
Old 06-19-22, 02:17 PM
  #18  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 3,767

Bikes: lots

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1958 Post(s)
Liked 2,932 Times in 1,489 Posts
Originally Posted by smd4
I pump my Veloflex 700 x 23C tires to 140 psi. Before I came to this site, I did it because for me, the ride at that pressure feels awesome, but people here believe they know better. Now it’s fun to watch them spin their wheels and tell me I’m wrong to like what I like.

Anyway, sounds like the compressor idea is working for you. I use a Silca Pista Plus with the aforementioned Hiro chuck. The pump and chuck are expensive but worth it.
Your pinion is 'they feel awesome'. Our collective opinion is 'you're crazy'. All good.
cxwrench is offline  
Likes For cxwrench:
Old 06-19-22, 03:37 PM
  #19  
smd4
Senior Member
 
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,642

Bikes: 1989 Cinelli Supercorsa

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3431 Post(s)
Liked 2,826 Times in 1,723 Posts
Originally Posted by cxwrench
Your pinion is 'they feel awesome'. Our collective opinion is 'you're crazy'. All good.
Just can’t help yourself, can you?

By “pinion,” I assume you mean “opinion.”

Went riding this afternoon with my son. He was riding his 29-er with 65 psi. He kicked my butt! But then I deflated my tires completely and smoked him.

Last edited by smd4; 06-19-22 at 05:21 PM.
smd4 is offline  
Old 06-19-22, 04:52 PM
  #20  
DiabloScott
It's MY mountain
 
DiabloScott's Avatar
 
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 9,991

Bikes: Klein, Merckx, Trek

Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4311 Post(s)
Liked 2,954 Times in 1,601 Posts
The first time I patched a sew-up, I wanted to check my work so I pressed it up to 150 with no rim. I could feel the energy in that thing, and then it exploded in my hands. The patch held but the stitching didn't.
DiabloScott is offline  
Likes For DiabloScott:
Old 06-19-22, 05:06 PM
  #21  
Jeff Neese
Senior Member
 
Join Date: Jul 2014
Posts: 1,486
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1080 Post(s)
Liked 681 Times in 438 Posts
Originally Posted by blinky
......
I know there are floor pumps now that are geared to high volume and others to high pressure - Topeak , Park , Specialized , Silca , Lezyne are names among many that make floor pumps - can anyone recommend a floor pump with flip lock preferred that will handle 90-110 psi pretty well ?
I used a compressor for the longest time, but finally last year bought one of these. It easily hits 125 PSI, which is what I run in my Continental GP5000 700x25C. The double-sided flip lock works very well, and it works equally as well on my Schrader and Presta wheels. No adapters or any fiddling around at all. I never turn the compressor on any more - this is just so much quicker and easier. The positive reviews are accurate - this is a great pump at a very reasonable price. Highly recommended.

Topeak Joe Blow Sport III High Pressure Floor Pump
Jeff Neese is offline  
Old 06-19-22, 05:55 PM
  #22  
KerryIrons
Senior Member
 
Join Date: Mar 2012
Posts: 962
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 497 Post(s)
Likes: 0
Liked 622 Times in 346 Posts
Originally Posted by Rolla
Came here to say exactly that.
Bingo! Just because somebody wants 140 psi there's no reason that their friends should let them do that unless they are racing on the track.
KerryIrons is offline  
Old 06-19-22, 05:56 PM
  #23  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 7,768
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 6882 Post(s)
Liked 10,873 Times in 4,637 Posts
Originally Posted by Jeff Neese
I used a compressor for the longest time, but finally last year bought one of these. It easily hits 125 PSI, which is what I run in my Continental GP5000 700x25C. The double-sided flip lock works very well, and it works equally as well on my Schrader and Presta wheels. No adapters or any fiddling around at all. I never turn the compressor on any more - this is just so much quicker and easier. The positive reviews are accurate - this is a great pump at a very reasonable price. Highly recommended.

Topeak Joe Blow Sport III High Pressure Floor Pump
Why on earth would you run 125 psi? That is ridiculous.

(And yes, this is how I will reply each time I see a post from someone bragging about running absurdly high psi.)
Koyote is offline  
Likes For Koyote:
Old 06-19-22, 06:04 PM
  #24  
Sy Reene
Advocatus Diaboli
 
Sy Reene's Avatar
 
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,613

Bikes: Merlin Cyrene, Nashbar steel CX

Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4717 Post(s)
Liked 1,526 Times in 997 Posts
Ever heard of falling on your sword. Just do it with the pump and as long as you weigh over 100lbs you should be good for inflation.
Sy Reene is offline  
Old 06-19-22, 06:25 PM
  #25  
Jeff Neese
Senior Member
 
Join Date: Jul 2014
Posts: 1,486
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 1080 Post(s)
Liked 681 Times in 438 Posts
Originally Posted by Koyote
Why on earth would you run 125 psi? That is ridiculous.
Considering that 123 psi is printed right on the side of the tire, I would hardly call it "ridiculous". By the time I top them off again (couple of weeks), they're usually down around 95-100 psi. I prefer the ride and handling when they're closer to the maximum recommend pressure, and that's true on all of my bikes.

The OP was asking which pumps can handle that pressure, not whether anyone approves of his choice of tire or tire pressure.

Last edited by Jeff Neese; 06-19-22 at 06:33 PM.
Jeff Neese is offline  
Likes For Jeff Neese:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.