Nishiki Colorado Mountain Bicycle
#1
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Omaha, NE
Posts: 14
Bikes: Nishiki Colorado
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Nishiki Colorado Mountain Bicycle
Hello,
I am new to Bike Forum, and turned 50 last month. I had knee surgery in August, and have decided to take up biking for exercise and as a hobby. I haven't been on a bicycle in at least 35 years, but am eager to give it a try.
I was hoping someone could provide some information on a Nishiki Colorado bicycle I purchased in a garage sale. The bike shop I took it to indicated this was a pretty good bike in its day. As someone suggested, I am including some photos of the bike. The bike appears to have had minimal use and was just sitting in storage. I replaced the Nishiki seat with a padded shock absorbing seat. However, I kept the original seat in the event I ever wish to sell the bike.
Any information would be most appreciated.
Thanks
I am new to Bike Forum, and turned 50 last month. I had knee surgery in August, and have decided to take up biking for exercise and as a hobby. I haven't been on a bicycle in at least 35 years, but am eager to give it a try.
I was hoping someone could provide some information on a Nishiki Colorado bicycle I purchased in a garage sale. The bike shop I took it to indicated this was a pretty good bike in its day. As someone suggested, I am including some photos of the bike. The bike appears to have had minimal use and was just sitting in storage. I replaced the Nishiki seat with a padded shock absorbing seat. However, I kept the original seat in the event I ever wish to sell the bike.
Any information would be most appreciated.
Thanks
#2
Life is good
Join Date: Jan 2001
Location: Not far from the Withlacoochee Trail. 🚴🏻
Posts: 18,209
Bikes: 2018 Lynskey Helix Pro
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
The serial number is on the underside of the bottom bracket. Post that number with pics in the Classic & Vintage forum. They should be able to give you the rundown.
[EDIT] I see you've already posted there. [/EDIT]
[EDIT] I see you've already posted there. [/EDIT]
__________________
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
Likes For RonH:
#3
TCR Advanced SL
Join Date: Oct 2007
Location: Ulah Proper N.C.
Posts: 1,043
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Nishikis rock. I use to own and ride exclusively a 1987 Nishiki Modulus,Kawamura frame, 1986 Nishiki Tri-A,Kawamura framed as well. Excellent quality road bikes. Both had a great steel ride, responsive, not twitchy. Wish I still owned them.
Post the serial# along with photos of the components in the Classic and Vintage forum. If you can read the manfacturing codes on the components post them as well. T-Mar will get you the imformation you need. Be sure to look at the Nishikis in the Nishiki Serial Number Data Base that T-Mar is working on. Nice bike ------- Lp
Post the serial# along with photos of the components in the Classic and Vintage forum. If you can read the manfacturing codes on the components post them as well. T-Mar will get you the imformation you need. Be sure to look at the Nishikis in the Nishiki Serial Number Data Base that T-Mar is working on. Nice bike ------- Lp
Likes For Spinz:
#4
Senior Member
Join Date: Feb 2007
Location: Citrus county Fl.
Posts: 787
Bikes: Litespeed Tuscany , Lemond Poprad, 1970's Motobecane Grand Record
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 9 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
That looks like a nice bike. I had a Nishiki hybrid many years ago and it was a great bike. What type of riding are you planning on doing with it? Are you going to ride on rail trails, the roads, dirt roads?
#5
Senior Member
That is the perfect bike to reenter the wonderful world of cycling. Be forewarned, it is highly addictive. I was in a position similar to yours just over a year ago. Since then I've logged almost 3,500 miles and am currently saving for bike # 4. And once you get some time in the saddle, you'll probably be switching back to the stock saddle (cushy really isn't better).
Likes For CACycling:
#6
just keep riding
Join Date: Feb 2005
Location: Milledgeville, Georgia
Posts: 13,560
Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 33 Times
in
22 Posts
4130 main tubes indicates a decent, not high level frame. The handlebars and seat look like something aimed at a casual or entry level rider. I can't see the components well enough to identify them from the pictures. Can you show the other side with close up shots of the crank and derailleurs?
Although it does not look like a high end bike, it should make a fine starter bike. There are many ways to modify a bike like that to make it more comfortable or better suited to specific types for rider and uses. The new seat might be fine for short rides at first, but it will become a sore spot on longer rides where padding = pain.
Although it does not look like a high end bike, it should make a fine starter bike. There are many ways to modify a bike like that to make it more comfortable or better suited to specific types for rider and uses. The new seat might be fine for short rides at first, but it will become a sore spot on longer rides where padding = pain.
Likes For BluesDawg:
#7
Senior Member
There is a Nishiki Colorado that parks in the bike rack at my office; it's been converted to commuting work.
It's a nice, rugged steel frame. If you put on smooth "city" tires in place of the knobbies, and get the saddle and handlebars adjusted so that it fits you, you have a very serviceable, if slightly heavy, urban bike for commuting, bike paths, light gravel roads, etc. Add a rear rack and you can haul stuff to work or even do weekend tours; add fenders and you have a nice foul-weather bike.
If you end up really riding a lot, you may find yourself in a situation by next summer where you want to upgrade to something new/lighter/shinier.....in that case, the Nishiki makes a perfectly fine backup / bad weather bike.
It's a nice, rugged steel frame. If you put on smooth "city" tires in place of the knobbies, and get the saddle and handlebars adjusted so that it fits you, you have a very serviceable, if slightly heavy, urban bike for commuting, bike paths, light gravel roads, etc. Add a rear rack and you can haul stuff to work or even do weekend tours; add fenders and you have a nice foul-weather bike.
If you end up really riding a lot, you may find yourself in a situation by next summer where you want to upgrade to something new/lighter/shinier.....in that case, the Nishiki makes a perfectly fine backup / bad weather bike.
Likes For BengeBoy:
#8
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
It's a nice, rugged steel frame. If you put on smooth "city" tires in place of the knobbies, and get the saddle and handlebars adjusted so that it fits you, you have a very serviceable, if slightly heavy, urban bike for commuting, bike paths, light gravel roads, etc. Add a rear rack and you can haul stuff to work or even do weekend tours; add fenders and you have a nice foul-weather bike.
If you do all that stuff you might develope OBTD (obsessive bike tinkerer's disease).
BengeBoy's got it. So do I.
Likes For Retro Grouch:
#9
Senior Member
I've got it bad. My latest acquisition is a new portable heater so I can tinker on bikes all winter in the garage.
The Stumpjumper in my signature line is coming along nicely, by the way -- a few more parts arriving by mail in the next week and it may be ready for power coating.
The Stumpjumper in my signature line is coming along nicely, by the way -- a few more parts arriving by mail in the next week and it may be ready for power coating.
Likes For BengeBoy:
#10
Galveston County Texas
Join Date: Nov 2007
Location: In The Wind
Posts: 33,221
Bikes: 02 GTO, 2011 Magnum
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1350 Post(s)
Liked 1,243 Times
in
621 Posts
You did good.
Thanks for the pics.
I started on a used Nishiki.
Thanks for the pics.
I started on a used Nishiki.
__________________
Fred "The Real Fred"
Fred "The Real Fred"
Likes For 10 Wheels:
#12
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Omaha, NE
Posts: 14
Bikes: Nishiki Colorado
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks for the suggestions. I may be able to swap out the seat since I just picked the bike up from the shop yesterday. Would you suggest something shaped more like the original in the photograph?
Thanks.
Thanks.
#13
Senior Member
Join Date: Feb 2004
Location: St Peters, Missouri
Posts: 30,225
Bikes: Catrike 559 I own some others but they don't get ridden very much.
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1572 Post(s)
Liked 643 Times
in
364 Posts
When you find the seat that you think is "the one" go back immediately and buy another because, when the first one shoots craps, that exact model won't be available anymore.
#14
Bike Junkie
Join Date: Jun 2005
Location: South of Raleigh, North of New Hill, East of Harris Lake, NC
Posts: 9,622
Bikes: Specialized Tarmac, Specialized Roubaix, Giant OCR-C, Specialized Stumpjumper FSR, Stumpjumper Comp, 88 & 92Nishiki Ariel, 87 Centurion Ironman, 92 Paramount, 84 Nishiki Medalist
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 68 Post(s)
Likes: 0
Liked 37 Times
in
27 Posts
It was a 1988 Nishiki Ariel that's responsible for me returning to cycling. I was messing around with a used X-mart bike for my son but just did not like the components when I ran into two used bikes at a garage sale. A Gary Fisher for my son and a Nishiki for me. Now I'm hooked with way too many bikes.
As for that very nice Colorado, it looks to be an early 1990's model. It looks like someone may have changed a few components, but make no mistake, the Colorado is all mountain bike. The Colorado was a mid-level mtb for Nishiki, but always in the top half of the line-up. I can usually nail down a later model Nishiki, but yours is the second one this week where I'm stumped to nail it down to an exact year.
If those are the original derailers we may have to read the two letter code on the back to determine the exact age of the bike. I'm not sure that the serial number database over on C&V can nail it down but it's worth a try. The component codes, if original will nail it down. T-Mar may be able to help as well.
Are there any scratches on that bike? If you get a chance take some photos in the sun and repost showing the drive train.
To read the component codes go to vintage-trek.com and click on the components bar on the left. I've used that site numerous times for the same information.
As for that very nice Colorado, it looks to be an early 1990's model. It looks like someone may have changed a few components, but make no mistake, the Colorado is all mountain bike. The Colorado was a mid-level mtb for Nishiki, but always in the top half of the line-up. I can usually nail down a later model Nishiki, but yours is the second one this week where I'm stumped to nail it down to an exact year.
If those are the original derailers we may have to read the two letter code on the back to determine the exact age of the bike. I'm not sure that the serial number database over on C&V can nail it down but it's worth a try. The component codes, if original will nail it down. T-Mar may be able to help as well.
Are there any scratches on that bike? If you get a chance take some photos in the sun and repost showing the drive train.
To read the component codes go to vintage-trek.com and click on the components bar on the left. I've used that site numerous times for the same information.
__________________
Roccobike BF Official Thread Terminator
Roccobike BF Official Thread Terminator
#15
Junior Member
Thread Starter
Join Date: Oct 2008
Location: Omaha, NE
Posts: 14
Bikes: Nishiki Colorado
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I posted information in the Classic and Vintage Forum, and T-Mar was able to determine that the bike is a "1985 model, manufactured by Giant, Taiwan". Upon closer inspection the frame is stamped "Taiwan", though the chrome stem just beneath the handle bars is stamped "Japan". The original saddle is stamped "Nishiki", but underneath says it was manufactured in Italy.
#16
Newbie
Join Date: Jan 2022
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Nishiki Colorado
Hello,
I am new to Bike Forum, and turned 50 last month. I had knee surgery in August, and have decided to take up biking for exercise and as a hobby. I haven't been on a bicycle in at least 35 years, but am eager to give it a try.
I was hoping someone could provide some information on a Nishiki Colorado bicycle I purchased in a garage sale. The bike shop I took it to indicated this was a pretty good bike in its day. As someone suggested, I am including some photos of the bike. The bike appears to have had minimal use and was just sitting in storage. I replaced the Nishiki seat with a padded shock absorbing seat. However, I kept the original seat in the event I ever wish to sell the bike.
Any information would be most appreciated.
Thanks
I am new to Bike Forum, and turned 50 last month. I had knee surgery in August, and have decided to take up biking for exercise and as a hobby. I haven't been on a bicycle in at least 35 years, but am eager to give it a try.
I was hoping someone could provide some information on a Nishiki Colorado bicycle I purchased in a garage sale. The bike shop I took it to indicated this was a pretty good bike in its day. As someone suggested, I am including some photos of the bike. The bike appears to have had minimal use and was just sitting in storage. I replaced the Nishiki seat with a padded shock absorbing seat. However, I kept the original seat in the event I ever wish to sell the bike.
Any information would be most appreciated.
Thanks
I did replace knobby tires with smoother ones before the trip.
Any thoughts of selling already?
Likes For jmue56:
#17
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 14,985
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6193 Post(s)
Liked 4,808 Times
in
3,316 Posts
jmue56 The OP only posted 14 times over a period of 6 days more than 13 years ago. I suppose if you get them active here again, then you'll be doing a good thing. Otherwise just consider that many others of us feel that dredging up old zombie threads is not a desirable way for a noob to introduce themselves to the forum.
Welcome to BF though. If you are really interested in an old Nishiki you might get active in the more recent posts of the Classic & Vintage sub-forum and maybe express some interest knowing if any have clues about where you might find one.
Welcome to BF though. If you are really interested in an old Nishiki you might get active in the more recent posts of the Classic & Vintage sub-forum and maybe express some interest knowing if any have clues about where you might find one.
#18
Member
I had a 1988 or 1989 Nishiki Colorado that had been designed by Richard Cunningham. It handled really well, but was a very harsh ride, largely due to it having a straight steel fork and a mono top for the chain stay. This was just before suspension became the rage. They sold for about $360 more or less in the range of the Specialized Rockhopper. I think the component group was Shimano Exage 3x6 (lots of plastic, but it held up for many years). Shimano went away from the Cunningham frame design in the early 90's. This is a guess, but the Colorado I had was probably a better off road than it was on the street. Most of the people buying mountain bikes rarely took them off road., so they may have gone to a street friendlier design.