How do you know if a helmet is good?
#1
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 465
Bikes: Trek 620, Jamis Satellite Sport, Raleigh Sport
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 139 Times
in
66 Posts
How do you know if a helmet is good?
I've been a recreational rider, small town commuter for many years. I've never owned a helmet. I've never really rode in traffic or on a highway. I just bought a road bike and do intend to ride on highways, so I bought a helmet.
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
#2
Senior Member
Join Date: Jan 2010
Posts: 36,114
Mentioned: 205 Post(s)
Tagged: 1 Thread(s)
Quoted: 16634 Post(s)
Liked 11,732 Times
in
5,614 Posts
No, as long as it fits you properly and you wear it properly.
If I had a dollar for every person I have seen wearing a helmet that is so ill fitted it's mind boggling I would have a lot more dollars. I usually assume they bought their helmets on line and set them up themselves without any assistance from a LBS or friend knowledgeable about proper helmet fit. There was even a neurologist in my local club whose helmet left almost his entire, large forehead exposed. You would expect something different from someone is his profession.
If I had a dollar for every person I have seen wearing a helmet that is so ill fitted it's mind boggling I would have a lot more dollars. I usually assume they bought their helmets on line and set them up themselves without any assistance from a LBS or friend knowledgeable about proper helmet fit. There was even a neurologist in my local club whose helmet left almost his entire, large forehead exposed. You would expect something different from someone is his profession.
Likes For indyfabz:
#4
Senior Member
Join Date: Jul 2002
Location: Sacramento, California, USA
Posts: 40,847
Bikes: Specialized Tarmac, Canyon Exceed, Specialized Transition, Ellsworth Roots, Ridley Excalibur
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 2945 Post(s)
Liked 3,063 Times
in
1,402 Posts
I've been a recreational rider, small town commuter for many years. I've never owned a helmet. I've never really rode in traffic or on a highway. I just bought a road bike and do intend to ride on highways, so I bought a helmet.
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
#6
Senior Member
Join Date: Nov 2015
Location: Dublin, Ireland
Posts: 1,226
Bikes: Bianchi Ti Megatube; Colnago Competition; Planet-X EC-130E; Klein Pulse; Amp Research B4; Litespeed Catalyst; Fondriest Squadra Corse; Trek Y11
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 580 Post(s)
Liked 413 Times
in
237 Posts
^^^ This, and if the helmet meets whatever safety standard is applicable to your region, e.g. EN 1078 in the EU.
It's much like motorcycle helmets: all helmets, regardless of price, must meet the same safety standards - so poor people get the same level of safety protection as rich people.
You pay extra for better padding, vision, fit, ventilation, lighter weight, color, shape, etc. How those factors affect "safety" is debatable; what should not be debatable is a standard level of impact protection (g-forces transmitted to the head in the event of an impact), which should be controlled with the relevant safety standard.
It's much like motorcycle helmets: all helmets, regardless of price, must meet the same safety standards - so poor people get the same level of safety protection as rich people.
You pay extra for better padding, vision, fit, ventilation, lighter weight, color, shape, etc. How those factors affect "safety" is debatable; what should not be debatable is a standard level of impact protection (g-forces transmitted to the head in the event of an impact), which should be controlled with the relevant safety standard.
Likes For ridelikeaturtle:
#7
Senior Member
Join Date: Jul 2005
Posts: 5,405
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 2098 Post(s)
Liked 493 Times
in
359 Posts
I've been a recreational rider, small town commuter for many years. I've never owned a helmet. I've never really rode in traffic or on a highway. I just bought a road bike and do intend to ride on highways, so I bought a helmet.
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
Likes For Leisesturm:
#8
Senior Member
Join Date: Jan 2010
Posts: 36,114
Mentioned: 205 Post(s)
Tagged: 1 Thread(s)
Quoted: 16634 Post(s)
Liked 11,732 Times
in
5,614 Posts
What about getting t-boned? I met a guy in a local club who was t-boned by a semi in TX while riding across the country during a supported trip. Long day. He was very tired. Saw that night's motel on the other side of the highway and turned left into traffic to cross the road without looking. Don't know if he was technically run over, but he got severely messed up. But he lived.
Likes For rseeker:
#10
What happened?
Join Date: Jun 2007
Location: Around here somewhere
Posts: 8,050
Bikes: 3 Rollfasts, 3 Schwinns, a Shelby and a Higgins Flightliner in a pear tree!
Mentioned: 57 Post(s)
Tagged: 1 Thread(s)
Quoted: 1835 Post(s)
Liked 291 Times
in
254 Posts
For all of that, motorcyclists either wear the full head thing or what looks like a WW II German Army helmet...they die more from getting swiped by passing cars and T-boned, internal injuries IMO. Wear a helmet, of COURSE but it's not The Force. You are as likely as the next Stormtrooper to take blaster fire.
__________________
I don't know nothing, and I memorized it in school and got this here paper I'm proud of to show it.
Likes For Rollfast:
#11
Senior Member
No, as long as it fits you properly and you wear it properly.
If I had a dollar for every person I have seen wearing a helmet that is so ill fitted it's mind boggling I would have a lot more dollars. I usually assume they bought their helmets on line and set them up themselves without any assistance from a LBS or friend knowledgeable about proper helmet fit. There was even a neurologist in my local club whose helmet left almost his entire, large forehead exposed. You would expect something different from someone is his profession.
If I had a dollar for every person I have seen wearing a helmet that is so ill fitted it's mind boggling I would have a lot more dollars. I usually assume they bought their helmets on line and set them up themselves without any assistance from a LBS or friend knowledgeable about proper helmet fit. There was even a neurologist in my local club whose helmet left almost his entire, large forehead exposed. You would expect something different from someone is his profession.
It is jaw-dropping, how many wear a bike helmet, as if they were wearing a baseball cap.
Likes For Chris0516:
#12
Senior Member
If it's a Bell helmet, you're good. I've crash-tested two of them. Lots of road rash in both cases, but my noggin was fine. Bell will replace any of their helmets, regardless of the model or when you bought it, for a flat price of $35. Incidentally, if your helmet hits the pavement or any other solid surface, replace it whether or not there is any visible damage. It's a good idea to buy a new helmet every 3-4 years anyway, as the EPS foam starts to deteriorate with time.
Likes For BobFishell:
#13
Senior Member
Join Date: Sep 2008
Location: NE Tennessee
Posts: 917
Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Liked 83 Times
in
61 Posts
As mentioned. A properly adjusted helmet is a key factor in its effectiveness.
My wife and I are in the market for new matching helmets (We ride our tandems a lot) and the next ones will be MIPS.
Good guide here.
https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/8019_fitting-a-helmet.pdf
I've only been in one crash and my helmet came through it unscathed. I hit a pothole doing 25 mph, the handlebar twisted and I was airborne and face planted into the pavement. Helmet??? Not a scratch. Me??? broken wrist, elbow, cracked ribs and a year of dealing with the injuries.
My wife and I are in the market for new matching helmets (We ride our tandems a lot) and the next ones will be MIPS.
Good guide here.
https://www.nhtsa.gov/sites/nhtsa.dot.gov/files/8019_fitting-a-helmet.pdf
I've only been in one crash and my helmet came through it unscathed. I hit a pothole doing 25 mph, the handlebar twisted and I was airborne and face planted into the pavement. Helmet??? Not a scratch. Me??? broken wrist, elbow, cracked ribs and a year of dealing with the injuries.
Likes For bakerjw:
#14
Senior Member
I've been a recreational rider, small town commuter for many years. I've never owned a helmet. I've never really rode in traffic or on a highway. I just bought a road bike and do intend to ride on highways, so I bought a helmet.
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
I searched Amazon and saw hundreds of brands I've never heard of, some very cheap, some super expensive. I googled brands and looked for articles, and didn't find many recommendations for any helmets under $100. Despite the fact that the cheaper helmets had good reviews and certifications.
I ended up buying a Lazer Blade. It had several great reviews and I believe an editors award from one of the cycling mags a couple years ago. It was on clearance at Sierra Trading post in my size for $29. Seems like a bargain. Any reason to think it might be unsafe? I know it's a couple year old model now, and I think it was replaced with the MIPS version of the same model. It arrived in the packaging, brand new and looking factory fresh.
Thanks!
Likes For Chris0516:
#15
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 465
Bikes: Trek 620, Jamis Satellite Sport, Raleigh Sport
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 139 Times
in
66 Posts
The Lazer Blade is being recalled: Lazer Blade recall
#16
Full Member
Join Date: Jul 2016
Location: Weston-super-Mare, Somerset, UK
Posts: 417
Bikes: Gitane Course, Paris Sport, Peugeot AO8, Peugeot Bretagne, Peugeot Premiere 85, Peugeot Premiere 86, Peugeot ANC Halfords Team Replica, Peugeot Festina Team Replica, Motobecane Grand Sport, Motobecane Super 15, Raleigh Pro Race, Raleigh Stratos, BSA
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 341 Times
in
79 Posts
I'd agree completely with what's already been posted - a good helmet is one that meets the appropriate standards, fits properly, and is adjusted properly.
The helmet I was wearing last summer when I had my accident ended up with a dent in the side of it. It wasn't an expensive helmet, it was in fact one of the cheapest my local bike shop had in stock when I bought it. I bought it there rather than online - and my childrens' helmets as well - because I could try it on and make sure it fitted properly.
I bought its replacement in the same shop (and have so far bought two replacement lids for my intrepid teenage son); I paid a bit more money this time knowing I wasn't getting better protection but a slightly lighter helmet.
The helmet I was wearing last summer when I had my accident ended up with a dent in the side of it. It wasn't an expensive helmet, it was in fact one of the cheapest my local bike shop had in stock when I bought it. I bought it there rather than online - and my childrens' helmets as well - because I could try it on and make sure it fitted properly.
I bought its replacement in the same shop (and have so far bought two replacement lids for my intrepid teenage son); I paid a bit more money this time knowing I wasn't getting better protection but a slightly lighter helmet.
Likes For ExPatTyke:
#17
• —
Join Date: Jun 2015
Location: Land of Pleasant Living
Posts: 10,910
Bikes: Shmikes
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 9002 Post(s)
Liked 4,917 Times
in
2,623 Posts
One could easily argue that all of our helmets are unsafe. While they provide fairly good protection against point-loading of the head and skull fractures, they are poor at mitigating the acceleration-deceleration forces that cause concussion. I wear one, but I don't kid myself about its effectiveness.
Last edited by MoAlpha; 06-04-19 at 04:39 PM. Reason: Spelling
Likes For MoAlpha:
#18
Unlisted member
Join Date: Dec 2005
Location: Chicagoland
Posts: 6,193
Bikes: Specialized Hardrock
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1376 Post(s)
Liked 432 Times
in
297 Posts
In addition to the above, a good helmet is comfortable and worn. If you're not wearing it when you need it you're not going to get the benefit out of it.
Likes For no motor?:
#19
Senior Member
Thanks for that link. It looks like only the size small and extra small CPSC sizes are recalled, but all sizes of the CE helmets are affected. How do I know which I have? Is mine assumed to be CPSC because I bought it in the US? I don't see anything that states which it is.
Likes For Chris0516:
#20
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 465
Bikes: Trek 620, Jamis Satellite Sport, Raleigh Sport
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 139 Times
in
66 Posts
I emailed Lazer but haven't heard back yet.
#21
Junior Member
Join Date: Jun 2019
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I'm one of *those* people, horrible with not wearing my helmet. Stupid because I've had 2 concussions in the past as well! I'm now looking for a replacement helmet to actually start wearing and I'm in the same boat kind of wondering if my budget is providing me protection. Good read here, helped me out a lot!
Likes For mivuj95:
#22
Unlisted member
Join Date: Dec 2005
Location: Chicagoland
Posts: 6,193
Bikes: Specialized Hardrock
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 1376 Post(s)
Liked 432 Times
in
297 Posts
It should have the CPSC sticker to be legally sold here. There may be others too, but that's the minimum.
Likes For no motor?:
#23
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 465
Bikes: Trek 620, Jamis Satellite Sport, Raleigh Sport
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 139 Times
in
66 Posts


Ah, I found the CPSC sticker. The print was so small I didn't realize what it was. So mine is a USA model CPSC size medium, so therefore not affected by the recall.
#24
Senior Member
Thread Starter
Join Date: Apr 2019
Location: Central Illinois
Posts: 465
Bikes: Trek 620, Jamis Satellite Sport, Raleigh Sport
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 151 Post(s)
Liked 139 Times
in
66 Posts
Yep I just heard back from Lazer and they verified my helmet is okay. Only the S and XS CPSC size are affected.
#25
Lover of Old Chrome Moly
Join Date: May 2011
Location: NW Minnesota
Posts: 2,949
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 143 Post(s)
Likes: 0
Liked 23 Times
in
17 Posts
The Snell Foundation is a good organization that puts helmets through rigorous tests. A Snell Foundation certification means you have a very good helmet. Before someone jumps on it . . . yes, some companies produce equivalent or better helmets but don't go through the Snell certification process, which is absolutely fine, but a Snell sticker is one way to assure that your helmet will perform well in an accident.
Likes For Myosmith: