Go Back  Bike Forums > Bike Forums > Mountain Biking
Reload this Page >

For People Who Ride Both on Flat and Clipless Pedals

Notices
Mountain Biking Mountain biking is one of the fastest growing sports in the world. Check out this forum to discuss the latest tips, tricks, gear and equipment in the world of mountain biking.

For People Who Ride Both on Flat and Clipless Pedals

Old 01-11-23, 04:18 PM
  #1  
AMoney
Junior Member
Thread Starter
 
Join Date: Sep 2020
Posts: 99
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 11 Times in 10 Posts
For People Who Ride Both on Flat and Clipless Pedals

Do people who want to ride on flats to improve technical skills and use clipless for cross country mountain biking, do you switch between pedals? Or, do you use the hybrid pedals that are both hybrid and clipless? Are there any disadvantages to the hybrid pedals? The reason I ask is that I almost always ride with clipless pedals. However, I'd like to work on rear wheel lift. Eventually, I might want to learn how to manual and bunny hop. I know that especially for the rear wheel lift I know that riding clipless can mask an improper technique.
AMoney is offline  
Old 01-13-23, 04:55 PM
  #2  
Kapusta
Advanced Slacker
 
Kapusta's Avatar
 
Join Date: Feb 2017
Posts: 6,187

Bikes: Soma Fog Cutter, Surly Wednesday, Canfielld Tilt

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 2749 Post(s)
Liked 2,516 Times in 1,422 Posts
For mountain biking, I use one or the other. I’d never use hybrid pedals for actual mountain biking. Really bad idea IMO. Good for a commuter or maybe road/gravel use, not for MTB.

There is really only bike I use both on (most bikes are one or the other). I just swap pedals. Takes about a minute.

If you want to learn flats, get GOOD flats. There are many great options for ~$50. Deity Deftrap (my fav), Kona Wha Wha 2, One Up, RF Chester…. All good.
Kapusta is offline  
Old 01-13-23, 04:59 PM
  #3  
Eric F 
Habitual User
 
Eric F's Avatar
 
Join Date: Jan 2020
Location: Altadena, CA
Posts: 7,785

Bikes: 2023 Niner RLT 9 RDO, 2018 Trek Procaliber 9.9 RSL, 2018 Storck Fascenario.3 Platinum, 2003 Time VX Special Pro, 2001 Colnago VIP, 1999 Trek 9900 singlespeed, 1977 Nishiki ONP

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 4828 Post(s)
Liked 7,819 Times in 3,704 Posts
I'm always clipped in on my MTB, so I don't have any personal experience with them, but on a MTB-focused forum I frequent, the general consensus seems to be that hybrid pedals are bad at both things.
__________________
"Swedish fish. They're protein shaped." - livedarklions
Eric F is offline  
Old 01-13-23, 06:33 PM
  #4  
Polaris OBark
ignominious poltroon
 
Polaris OBark's Avatar
 
Join Date: Jan 2022
Posts: 3,923
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 2184 Post(s)
Liked 3,336 Times in 1,741 Posts
I have those kind of hybrid pedals on my touring bike at the moment. Funn single-sides. The flat/spikey side is fine. The clips are inferior to Shimano's own.

My wife has Deity pedals and really likes them, despite being a devote atheist.
Polaris OBark is offline  
Old 01-16-23, 10:37 AM
  #5  
c_m_shooter
Senior Member
 
c_m_shooter's Avatar
 
Join Date: Sep 2006
Location: Paradise, TX
Posts: 2,087

Bikes: Soma Pescadero, Surly Pugsley, Salsa Fargo, Schwinn Klunker, Gravity SS 27.5, Monocog 29er

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 186 Post(s)
Liked 234 Times in 166 Posts
Usually the first ride on flats, there will be a moment of panic feeling trapped coming up to a stop. I will push my right heel down and out, and it won't move. I will do a double take and then remember to just lift my foot off ...
c_m_shooter is offline  
Likes For c_m_shooter:
Old 01-17-23, 09:37 AM
  #6  
2old
Senior Member
 
Join Date: Jul 2014
Location: socal
Posts: 4,217
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 872 Post(s)
Liked 795 Times in 603 Posts
I used to employ clipless when needing to be as efficient (fast) as possible and flats the rest of the time because they were more fun. I would just switch the pedals. My wife rides Shimano hybrids so she can unclip the left side when descending "dangerous" trails.
2old is offline  
Old 01-17-23, 12:21 PM
  #7  
DMC707
Senior Member
 
DMC707's Avatar
 
Join Date: Jan 2013
Location: Norman, Oklahoma
Posts: 5,389

Bikes: Too many to list

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 1764 Post(s)
Liked 1,119 Times in 743 Posts
I used to ride clipless on everything, including downhill

it’s only in the last couple of years, and after a knee replacement surgery, that I switched to flats

my cross-country bike is still wearing SPD’s, but my big travel trail bikes are gladly wearing flats still

The only thing I’ve been riding the past couple months is my e-bike though, which is like a monster truck in the trees. Way too much travel and brakes are stupid strong—- I don’t think it will ever see spots
DMC707 is offline  
Old 01-17-23, 02:03 PM
  #8  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,598
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2964 Post(s)
Liked 1,163 Times in 760 Posts
I used to ride flats on my mountain bike. But my shins got mad at me after awhile. Maybe I just never learned to ride them properly, but ever since I switched to clipless I never took a pedal to the shin ever again.
prj71 is offline  
Old 01-21-23, 03:16 AM
  #9  
georges1
Steel is real
 
georges1's Avatar
 
Join Date: Mar 2013
Location: Not far from Paris
Posts: 2,262

Bikes: 1992Giant Tourer,1992MeridaAlbon,1996Scapin,1998KonaKilaueua,1993Peugeot Prestige,1991RaleighTeamZ(to be upgraded),1998 Jamis Dragon,1992CTWallis(to be built),1998VettaTeam(to be built),1995Coppi(to be built),1993Grandis(to be built)

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 624 Post(s)
Liked 897 Times in 585 Posts
Always used those XT PD-T 780/ XT PD-T 8000 never looked back since then
georges1 is offline  
Old 02-18-23, 10:01 AM
  #10  
roadfix
hello
 
roadfix's Avatar
 
Join Date: May 2003
Location: Los Angeles
Posts: 18,684
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Liked 109 Times in 48 Posts
After riding clipless on all my bikes for over 30 yrs I recently switched to flats on my bikepacking bike. It was quite a learning experience for me to get used to the flats (Crank Brothers Stamp 7’s). I still run clipless on my mountain, road, and fixed gear bikes….. the old classic eggbeaters…
roadfix is offline  
Old 02-19-23, 11:05 AM
  #11  
rosefarts
With a mighty wind
 
Join Date: May 2015
Posts: 2,554
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1072 Post(s)
Liked 841 Times in 475 Posts
I’ve been riding mostly flats for the last year. It’s hard to reprogram myself from the previous 30.

Once I got accustomed to it, I noticed my overall pace/times were just as fast. And my uphill techie climbing is actually better.

I still ride clipped in on my road bikes and gravel bike, and occasionally will switch to SPD for long distances where the uniform pedaling circles is less fatiguing.

Hybrid pedals seem like they’d be ok for a spin bike or maybe a grocery getter. Not much else.
rosefarts is offline  
Old 02-19-23, 11:57 PM
  #12  
sean.hwy
Senior Member
 
sean.hwy's Avatar
 
Join Date: Jan 2020
Location: San Jose
Posts: 1,022

Bikes: Blur / Ibis Hakka MX / team machince alr2 / topstone 1

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 424 Post(s)
Liked 272 Times in 200 Posts
I have never found a good pedal that does both. The flat side is always inferior to a dedicated flat pedal.
sean.hwy is offline  
Likes For sean.hwy:
Old 02-25-23, 04:42 PM
  #13  
Caseydc
Newbie
 
Join Date: Feb 2023
Posts: 11
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 1 Time in 1 Post
I crashed bad clipped in about 20 years ago. That was enough for me
Caseydc is offline  
Old 02-25-23, 05:04 PM
  #14  
veganbikes
Clark W. Griswold
 
Join Date: Mar 2014
Location: ,location, location
Posts: 13,274

Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26

Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4251 Post(s)
Liked 3,861 Times in 2,577 Posts
Originally Posted by Caseydc
I crashed bad clipped in about 20 years ago. That was enough for me
This means nothing. What is the point of it with zero context. Anything can happen but it doesn't mean a certain pedal is bad. There are so many factors that could have been involved.
veganbikes is offline  
Old 03-07-23, 03:01 PM
  #15  
rebel1916
Senior Member
 
rebel1916's Avatar
 
Join Date: Aug 2011
Posts: 3,138
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 67 Post(s)
Liked 83 Times in 44 Posts
Originally Posted by AMoney
Do people who want to ride on flats to improve technical skills and use clipless for cross country mountain biking, do you switch between pedals? Or, do you use the hybrid pedals that are both hybrid and clipless? Are there any disadvantages to the hybrid pedals? The reason I ask is that I almost always ride with clipless pedals. However, I'd like to work on rear wheel lift. Eventually, I might want to learn how to manual and bunny hop. I know that especially for the rear wheel lift I know that riding clipless can mask an improper technique.
The double sided pedals suck at both jobs, but they really suck at being a flat pedal. I have em on my touring bike, because most of my "tours" are under 15 miles round trip to local breweries, and I curse them all the time
rebel1916 is offline  
Old 03-07-23, 03:46 PM
  #16  
RCMoeur 
Cantilever believer
 
RCMoeur's Avatar
 
Join Date: Nov 2021
Location: Phoenix, AZ
Posts: 1,471
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 491 Post(s)
Liked 1,659 Times in 759 Posts
My mountain, touring, and "speedy cruiser" all have two-sided pedals (flat one side, SPD on the other). The only pure-SPD pedals I'm currently running are on the racer. They're fine for most riding. On the tourer and cruiser, I usually stay clipped in, while on the MTB I'll unclip n' flip in certain segments that have a higher risk of sudden horizontal stops (I don't bounce anymore when I hit the dirt & rocks, so I try to keep vertical or at least keep my involuntary dismounts somewhat graceful.)
__________________
Richard C. Moeur, PE - Phoenix AZ, USA
https://www.richardcmoeur.com/bikestuf.html
RCMoeur is offline  
Old 03-08-23, 08:55 AM
  #17  
prj71
Senior Member
 
Join Date: Jun 2015
Location: North Central Wisconsin
Posts: 4,598
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 2964 Post(s)
Liked 1,163 Times in 760 Posts
Originally Posted by Caseydc
I crashed bad clipped in about 20 years ago. That was enough for me
You can also crash bad not clipped in.
prj71 is offline  
Old 03-10-23, 05:26 PM
  #18  
AMoney
Junior Member
Thread Starter
 
Join Date: Sep 2020
Posts: 99
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 11 Times in 10 Posts
I decided it was best to switch pedals depending on what type of riding I'l be doing. I will use the flat pedals if I want to work on skills. I will be using the clipless pedals for my trail riding and racing.
AMoney is offline  
Likes For AMoney:
Old 03-24-23, 01:49 PM
  #19  
IcySwan1 
Full Member
 
Join Date: May 2021
Location: Haines, Alaska
Posts: 308
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 94 Post(s)
Liked 104 Times in 73 Posts
I use Shimano hybrid pedals on a bike I leave at the grandkids' house. I ride clipped in when I ride alone, but use flats when with the kids. It is amazing how often you put your foot down when riding with a 6 year old.

Mike
IcySwan1 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.