Bike Shop Inflation Nightmare...
05-16-23, 10:31 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,775
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3502 Post(s)
Liked 2,917 Times
in
1,771 Posts
Bike Shop Inflation Nightmare...
Literally.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
Likes For smd4:
05-16-23, 10:45 AM
#2
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,493
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4343 Post(s)
Liked 3,978 Times
in
2,659 Posts
Oh jeez, now people are trying to dream up fake stories about local bike shops to make them sound bad...
Likes For veganbikes:
05-16-23, 11:18 AM
#3
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,518
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3658 Post(s)
Liked 5,404 Times
in
2,744 Posts
D minus, sorry. In a real dream they'd have been working on your bike in an ice cream shop and it would have been a grade school teacher telling you to take it back.
Last edited by shelbyfv; 05-16-23 at 11:22 AM.
Likes For shelbyfv:
05-16-23, 11:23 AM
#4
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,840
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,818 Times
in
1,539 Posts
probably caused bv the "I am going to by a cheap bike and then upgrade it, is this a good idea?" threads
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Likes For squirtdad:
05-16-23, 11:25 AM
#5
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,775
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3502 Post(s)
Liked 2,917 Times
in
1,771 Posts
Likes For smd4:
05-16-23, 11:35 AM
#6
Senior Member
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,895
Bikes: Fuji Touring, Novara Randonee
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2601 Post(s)
Liked 1,925 Times
in
1,208 Posts
05-16-23, 11:35 AM
#7
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,518
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3658 Post(s)
Liked 5,404 Times
in
2,744 Posts
A dog bit me while I was riding yesterday. That probably caused some psychic disruption worldwide.
05-16-23, 12:18 PM
#8
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 17,936
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 10413 Post(s)
Liked 11,874 Times
in
6,081 Posts
Literally.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
__________________
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
"Don't take life so serious-it ain't nohow permanent."
"Everybody's gotta be somewhere." - Eccles
Likes For genejockey:
05-16-23, 01:50 PM
#9
Expired Member
Join Date: Jun 2007
Location: TN
Posts: 11,518
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 3658 Post(s)
Liked 5,404 Times
in
2,744 Posts
I am a half century post college graduation and still dream that I must to return to campus and finish one more class. 
Likes For shelbyfv:
Likes For Chuck Naill:
05-16-23, 03:30 PM
#11
Full Member
is this canyon negatively astroturfing for LBS?
The worse was maybe 6 years ago when I brought in some parts into a job to upgrade my bike and the manager at the time told me he would need to charge me a fee for not buying the bike through their job and bringing in my own parts. I understand buying parts from a LBS supports the business and then they can directly warranty those parts but the problem is most parts never have the exact parts you need and they are always more expensive. I think now with direct to consumer brands and the industry being more competitive there wouldn't be a shop that would dare to do this.
The worse was maybe 6 years ago when I brought in some parts into a job to upgrade my bike and the manager at the time told me he would need to charge me a fee for not buying the bike through their job and bringing in my own parts. I understand buying parts from a LBS supports the business and then they can directly warranty those parts but the problem is most parts never have the exact parts you need and they are always more expensive. I think now with direct to consumer brands and the industry being more competitive there wouldn't be a shop that would dare to do this.
05-16-23, 03:52 PM
#12
Senior Member
That was a reality in Zimbabwe. Over a short period of time, a set of tires for a Mamba bicycle went from 100,000 Zimbabwean dollars to more than a billion, and eventually more than a trillion.
Likes For 50PlusCycling:
05-16-23, 06:28 PM
#13
Senior Member
Join Date: May 2017
Location: Hacienda Hgts
Posts: 2,105
Bikes: 1999 Schwinn Peloton Ultegra 10, Kestrel RT-1000 Ultegra, Trek Marlin 6 Deore 29'er
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 822 Post(s)
Liked 1,960 Times
in
943 Posts
Did Tom Selleck talk you into a reverse mortgage to cover your bike dream?
Likes For CAT7RDR:
05-16-23, 06:34 PM
#14
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,775
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3502 Post(s)
Liked 2,917 Times
in
1,771 Posts
I was trying to tell myself I could get several very nice bikes for that amount. But I wrote the check anyway (not that I could ever write a check for that amount. Who writes a check at the bike store anyway?). And I work on my own bike!
05-16-23, 06:40 PM
#15
Senior Member
Join Date: Jan 2010
Posts: 39,229
Mentioned: 211 Post(s)
Tagged: 1 Thread(s)
Quoted: 18409 Post(s)
Liked 15,520 Times
in
7,324 Posts
Meh. You should see what robot insurance costs these days.
05-16-23, 07:40 PM
#16
Senior Member
Join Date: Mar 2010
Posts: 1,659
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 1247 Post(s)
Liked 1,323 Times
in
674 Posts
Literally.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
I had a nightmare last night where I took my bike into my old shop--still run by the family who used to run it back in the 1980s--and asked them to "upgrade" my bike. Presumably I wanted all-new parts. I asked them to "do it right," no matter the expense, suggesting they didn't do it right the last time.
When I went to pick it up, I was handed the bill: $36,000. Not itemized, so I'm not sure what I got for that amount, but I did notice that they did wrap the bars with dual rolls of tape in a red-and-white pattern. I wrote the check without question--sounds like something stupid I'd do. The wife was NOT happy, and told me to just have them re-do the bike as it was, and get my money back. The shop was NOT happy. Then they explained to me that they had already sold off all my old components. Then I wasn't happy.
Woke up in a cold sweat. I have an active dream life.
05-16-23, 08:48 PM
#17
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26400 Post(s)
Liked 10,373 Times
in
7,202 Posts
.
...last night I dreamt about Middle Eastern food. I have never, to my knowledge, dreamt about brazing metal.
...last night I dreamt about Middle Eastern food. I have never, to my knowledge, dreamt about brazing metal.
__________________
05-16-23, 10:49 PM
#18
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,734
Bikes: '79 Trek 938, '86 Jim Merz Allez SE, '90 Miyata 1000, '68 PX-10, '80 PXN-10, '73 Super Course, '87 Guerciotti, '83 Trek 600, '80 Huffy Le Grande
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 1225 Post(s)
Liked 3,535 Times
in
1,407 Posts
Likes For AdventureManCO:
05-17-23, 04:58 AM
#19
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,775
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3502 Post(s)
Liked 2,917 Times
in
1,771 Posts
05-17-23, 05:25 AM
#20
Senior Member
Join Date: Jun 2013
Location: SW Fl.
Posts: 5,617
Bikes: Day6 Semi Recumbent "FIREBALL", 1981 Custom Touring Paramount, 1983 Road Paramount, 2013 Giant Propel Advanced SL3, 2018 Specialized Red Roubaix Expert mech., 2002 Magna 7sp hybrid, 1976 Bassett Racing 45sp Cruiser
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1068 Post(s)
Liked 780 Times
in
502 Posts
05-17-23, 05:53 AM
#21
...
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,501
Bikes: Bicycles? Yup.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 478 Post(s)
Liked 1,573 Times
in
731 Posts
I recently had the college dream that I couldn't find my classroom. The nightmare seemed to go on for hours, walking the hallways and asking for help. The atmosphere was thick with failure and despair and I didn't really sleep afterwards. Ack.
Likes For BTinNYC:
05-17-23, 06:21 AM
#22
Senior Member
Join Date: Oct 2008
Location: Northern NY...Brownville
Posts: 2,571
Bikes: Specialized Aethos, Specialized Diverge Comp E5
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 240 Post(s)
Liked 453 Times
in
264 Posts
It's expensive to upgrade a Huffy...just write the check and move on...
05-17-23, 07:20 AM
#23
Tragically Ignorant
Join Date: Jun 2018
Location: New England
Posts: 15,613
Bikes: Serotta Atlanta; 1994 Specialized Allez Pro; Giant OCR A1; SOMA Double Cross Disc; 2022 Allez Elite mit der SRAM
Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 8186 Post(s)
Liked 9,098 Times
in
5,054 Posts
Reminds me of the thread asking about any really noticeable differences between Dura-Ace and Ultegra that degenerated into a debate over the meaning of "money is no object."
Likes For livedarklions:
Likes For Pratt:
05-17-23, 03:36 PM
#25
Senior Member
Thread Starter
Join Date: Dec 2020
Location: Wake Forest, NC
Posts: 5,775
Bikes: 1989 Cinelli Supercorsa
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 3502 Post(s)
Liked 2,917 Times
in
1,771 Posts
It doesn’t exist in it’s 1980s incarnation anymore.
BTW, my son goes to your namesake school.
BTW, my son goes to your namesake school.