Clunker 100 Challenge COVID 2.0 edition #7
#176
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,761
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2429 Post(s)
Liked 3,097 Times
in
1,952 Posts
I feel the same way when I look at the Portland Craigslist. Search for bikes under $100 and it’s almost all kids bikes. Even old, low-end Schwinns that need work it seems like people are asking $150 to $200. I think part of the challenge is figuring out where to find good candidate bikes. There are ways. Ask @randyjawa. He has a great list of strategies. I’m not sure all of them work in all areas, but it’s at least things to try. I feel like I’m still at the very beginning of the learning curve.
i also got a way too big 25” 1983 Trek 500 in great shape, and way too small 20” patinaed Schwinn voyager frame fork and HS for songs, but they aren’t clunker candidates. Not sure what I am going to do with those two.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#177
Car free since 2018
Join Date: Aug 2017
Location: Vancouver, BC
Posts: 684
Bikes: Mostly japanese ones
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 257 Post(s)
Liked 269 Times
in
134 Posts
20 kms today. maybe 10kms yesterday. This is a small section of the BC Randonneurs City Limits permanent, which I would like to try at some point. I've done other sections before. On the plus side, it's all in the city. On the minus side, there's a whole lot of intersections with stop lights.
Nat Bailey Stadium home of the Vancouver Canadiens
Something fishy about this mural
Motorcycles, I know, but in earlier times purveyors of Apollos and Kuwaharas
Bannister and Landy
Just a tunnel
Nat Bailey Stadium home of the Vancouver Canadiens
Something fishy about this mural
Motorcycles, I know, but in earlier times purveyors of Apollos and Kuwaharas
Bannister and Landy
Just a tunnel
Likes For rgvg:
#178
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 6,761
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Mentioned: 59 Post(s)
Tagged: 0 Thread(s)
Quoted: 2429 Post(s)
Liked 3,097 Times
in
1,952 Posts
My favorite Shimano part...
600 EX spindle. Elegant and perfect.
Pedals are a no go...Have no cap...no clips...might have to use the ugly $10 SPDs I bought a ways back.
Derailleur should be usable, though the lower pulley is over tightened I think.
Pedals are a no go...Have no cap...no clips...might have to use the ugly $10 SPDs I bought a ways back.
Derailleur should be usable, though the lower pulley is over tightened I think.
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 1982 AD SLE, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super
#179
Senior Member
A clunker is born
I feel the same way when I look at the Portland Craigslist. Search for bikes under $100 and it’s almost all kids bikes. Even old, low-end Schwinns that need work it seems like people are asking $150 to $200. I think part of the challenge is figuring out where to find good candidate bikes. There are ways. Ask @randyjawa. He has a great list of strategies. I’m not sure all of them work in all areas, but it’s at least things to try. I feel like I’m still at the very beginning of the learning curve.
edit: so having posted this on my phone I did not realize the pic focus was poo. Will take better pics tomorrow.
__________________
I.C.
I.C.
Last edited by Insidious C.; 05-15-21 at 09:54 PM.
#180
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
I had forgotten that EvapoRust was so nearly clear. I've been reusing the same jug for three or four years now. It's probably about time to replace it. Just for kicks I've been soaking my rusty chain in it. After a couple of days it shows no sign of change.
__________________
My Bikes
My Bikes
#181
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
I've been avoiding the Clunker Challenge, too busy, lots of other projects, etc., but with @Andy_K rescuing the Vernonia Takara, which we've both been eyeing for several years, I think I need to enter, especially since the plan is to ride from Col de Kaylor to drop it back off with in Vernonia. Since the ride from his house is exactly 100km, there's some cosmic karma telling me I have to join. @Insidious C. might want to join up.
Andy pointed out the pile of bikes I have in the Atelier, and an early 70's Raleigh Super Course seemed to be the right one. I picked it up for $50 awhile back with the idea of converting it to a 650b grocery getter. That can wait. The biggest challenge will be to find some 27" tires that fit the budget.
Pix forthcoming.
Andy pointed out the pile of bikes I have in the Atelier, and an early 70's Raleigh Super Course seemed to be the right one. I picked it up for $50 awhile back with the idea of converting it to a 650b grocery getter. That can wait. The biggest challenge will be to find some 27" tires that fit the budget.
Pix forthcoming.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#182
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
I've been avoiding the Clunker Challenge, too busy, lots of other projects, etc., but with @Andy_K rescuing the Vernonia Takara, which we've both been eyeing for several years, I think I need to enter, especially since the plan is to ride from Col de Kaylor to drop it back off with in Vernonia. Since the ride from his house is exactly 100km, there's some cosmic karma telling me I have to join. @Insidious C. might want to join up.
__________________
My Bikes
My Bikes
#183
Master Parts Rearranger
Join Date: Mar 2015
Location: Portlandia's Kuiper Belt, OR
Posts: 4,402
Bikes: 1982 Trek 720 - 1985 Trek 620 - 1984 Trek 620 - 1980 Trek 510 - Other luminaries past and present
Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1556 Post(s)
Liked 2,023 Times
in
989 Posts
1981 Fuji S12-S LTD - 18-Speed - 25"
You could say I stumbled into this Challenge by complete accident. Bike Works had their (now) monthly As-Is sale and I went looking for a bike to buy and do a full refurbishing/restoration of. Typically, these are smaller models as I am just keeping my Trek 620 as my only bike. I also went there to talk to the guys at BW that I know as well as @Mr. 66 who was also (as always) scouring the parking lot for something to pick up. I saw the Fuji among other tall, tired, vintage rides. Taller head tube, dirty and dusty but otherwise very nice underneath. I was immediately a fan. 27" wheels, 3x6 gearing, chrome socks and fork crown--a proper vintage Fuji! Mr. 66 half goaded me into getting it, but at their asking price, I could put some sweat equity into it and maybe make a couple of bucks on it, or just sell it for what I had into it monetarily. Whatever. It's another bike back on the road, made so by someone who hasn't killed themselves building their own zoo of bikes over the years. $100 out the door, so ol' Riddle is at the limit here. Could I have found a cheaper, taller bike for less? Sure, but price isn't the only thing in play here...
A note folded around the bottle cage from either the previous owner or donator (on behalf of the previous owner) indicated that a tune-up had been done and that the only problem at that moment was the need for pads to be replaced. As with all "tune-ups", either professional or at home; when they were done, how much was done, and the level of tune-up is a complete mystery. I suppose another factor is how well those components worked in the first place. The wheels are pretty much true, and the sealed (or "sealed") hubs spin well. The seatpost and stem moved easily and are in quite decent shape. The rest of the State of Tune needed some help from me via derailleur limits and flipping the QR lever on the calipers to "open" so that I could actually spin the wheel freely. Somehow this bike has survived this long--40 years!--and has remained 100% original. Maybe the brake cable housings have been replaced. The inner tubes definitely have. But everything else? A lot of evidence points to them being long time members of this S12-S's frameset. 26.6 lbs including pedals and all 8,000 reflectors.
As found/brought home:
High-falutin' double-butted chromoly tubing! Hi-ten fork (naturally).
Yes, this is an original-equipment Technomic stem! Standard on the LTDs.
Old gum hoods never cease to amaze in their ability to self-destruct. Also, very peculiar shift cable routing. Makes operating the brake levers from the hoods even more awkward.
Chromed and engraved fork crowns. Along with the chrome socks, yet another reason I am so happy to have a proper vintage Fuji that fits me (well enough).
I will be de-specking this chrome in due time. Very excited to do so!
The S12-S LTD all set up and ready for a night test ride (minus the lights). Stem and seatpost/saddle at maximum heights, the aforementioned derailleur and brake adjustments, as well as airing the tires up to 70/75 PSI (F/R). Quite minimal, and with a "tune up" I'd certainly hope it'd be.
So how does it ride? 27 x 1 1/8" (28mm nominal) tires that measure 24mm wide are a bit...firm. Add to that the poor brake lever position and cloth bar tape, and any crummy road is an instant nightmare. The saddle, despite feeling like a hatchet via one's finger test, is actually just fine. Gearing is 53/44/36T in front and a 14-30T out back. Front derailleur is reverse-pull. The shifting is best described as "reluctant" and "never settled." The dork disc rattles/buzzes all the time, and loudly. The braking is garbage from the hoods, and marginal from the drops. There are two gouges in the rear rim that are totally not concerning but don't seem to bother the brake calipers/pads. The 170mm cranks are quite nice to spin--knees very much like them. Bars are super narrow (36.5cm CTC on top, 38.5cm CTC in the drops). The steering is delightful! And it would be even better with brake levers in the right place, IMO.
Compared to modern or modernized bikes, and certainly much of what I build and ride, this bike is 'garbage' in a lot of ways. But it's 'fun garbage.' Maybe it's me getting older and more understanding, but in a safe operating space, bikes in these states of tune get along just fine. It looks classy as heck, and it's not even cleaned or wiped down. Outside of removing all dorky reflectors and the buzzy dork disc, I basically can't touch this bike for 100 kms / miles, lest I step over the $100 limit. The brake lever "hoods" will melt into thin air, the cloth bar tape will tear apart, and I'm not going to bother with what the tires might do. The tentative plan is to ride it the requisite distance, then do a full disassembly and frameset weighing, cleaning, and polishing. Then build with Dura-Ace & Company while the 620 is being worked on (canti post relocation, new color). Why bother with "just" an old Fuji? Well, before I bought it, I confirmed that the brake calipers could reach 700C wheels, and that there is clearance for 42mm tires. Gravel bike on the cheap?
A note folded around the bottle cage from either the previous owner or donator (on behalf of the previous owner) indicated that a tune-up had been done and that the only problem at that moment was the need for pads to be replaced. As with all "tune-ups", either professional or at home; when they were done, how much was done, and the level of tune-up is a complete mystery. I suppose another factor is how well those components worked in the first place. The wheels are pretty much true, and the sealed (or "sealed") hubs spin well. The seatpost and stem moved easily and are in quite decent shape. The rest of the State of Tune needed some help from me via derailleur limits and flipping the QR lever on the calipers to "open" so that I could actually spin the wheel freely. Somehow this bike has survived this long--40 years!--and has remained 100% original. Maybe the brake cable housings have been replaced. The inner tubes definitely have. But everything else? A lot of evidence points to them being long time members of this S12-S's frameset. 26.6 lbs including pedals and all 8,000 reflectors.
As found/brought home:
High-falutin' double-butted chromoly tubing! Hi-ten fork (naturally).
Yes, this is an original-equipment Technomic stem! Standard on the LTDs.
Old gum hoods never cease to amaze in their ability to self-destruct. Also, very peculiar shift cable routing. Makes operating the brake levers from the hoods even more awkward.
Chromed and engraved fork crowns. Along with the chrome socks, yet another reason I am so happy to have a proper vintage Fuji that fits me (well enough).
I will be de-specking this chrome in due time. Very excited to do so!
The S12-S LTD all set up and ready for a night test ride (minus the lights). Stem and seatpost/saddle at maximum heights, the aforementioned derailleur and brake adjustments, as well as airing the tires up to 70/75 PSI (F/R). Quite minimal, and with a "tune up" I'd certainly hope it'd be.
So how does it ride? 27 x 1 1/8" (28mm nominal) tires that measure 24mm wide are a bit...firm. Add to that the poor brake lever position and cloth bar tape, and any crummy road is an instant nightmare. The saddle, despite feeling like a hatchet via one's finger test, is actually just fine. Gearing is 53/44/36T in front and a 14-30T out back. Front derailleur is reverse-pull. The shifting is best described as "reluctant" and "never settled." The dork disc rattles/buzzes all the time, and loudly. The braking is garbage from the hoods, and marginal from the drops. There are two gouges in the rear rim that are totally not concerning but don't seem to bother the brake calipers/pads. The 170mm cranks are quite nice to spin--knees very much like them. Bars are super narrow (36.5cm CTC on top, 38.5cm CTC in the drops). The steering is delightful! And it would be even better with brake levers in the right place, IMO.
Compared to modern or modernized bikes, and certainly much of what I build and ride, this bike is 'garbage' in a lot of ways. But it's 'fun garbage.' Maybe it's me getting older and more understanding, but in a safe operating space, bikes in these states of tune get along just fine. It looks classy as heck, and it's not even cleaned or wiped down. Outside of removing all dorky reflectors and the buzzy dork disc, I basically can't touch this bike for 100 kms / miles, lest I step over the $100 limit. The brake lever "hoods" will melt into thin air, the cloth bar tape will tear apart, and I'm not going to bother with what the tires might do. The tentative plan is to ride it the requisite distance, then do a full disassembly and frameset weighing, cleaning, and polishing. Then build with Dura-Ace & Company while the 620 is being worked on (canti post relocation, new color). Why bother with "just" an old Fuji? Well, before I bought it, I confirmed that the brake calipers could reach 700C wheels, and that there is clearance for 42mm tires. Gravel bike on the cheap?
Last edited by RiddleOfSteel; 05-16-21 at 01:22 AM.
Likes For RiddleOfSteel:
#184
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
You should bring it down for a ride to Vernonia.
__________________
My Bikes
My Bikes
#185
Master Parts Rearranger
Join Date: Mar 2015
Location: Portlandia's Kuiper Belt, OR
Posts: 4,402
Bikes: 1982 Trek 720 - 1985 Trek 620 - 1984 Trek 620 - 1980 Trek 510 - Other luminaries past and present
Mentioned: 221 Post(s)
Tagged: 0 Thread(s)
Quoted: 1556 Post(s)
Liked 2,023 Times
in
989 Posts
So here's the conundrum for me: I ride clipless for reasons of power transfer, some vanity (I mean, come on, let's be honest), and to help align my foot/knee/hips biomechanically since I have a left knee/leg that is now pretty particular. Since $80 Ultegra SPD-SL pedals blow the budget out of the water, I will have to do some distance testing to see how long I last with just regular shoes and these pedals. I'd love to not have any problems, but one never knows. The saddle doesn't go high enough for clipless shoe wearing (on top of 170mm vs 175mm crank lengths), but running shoes and these pedals seem to make up enough difference to be fine over the course of 5 miles so far. Certainly no 40 mile Vernonia ride, so I have some work to do. It sounds like a lot of fun. Riding bikes: 99% always fun, right? Right...
#186
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
I went paint shopping yesterday, visiting Ace, Home Despot, and Fred Meyer in search of the perfect blend of cheap, durable, and close to the color I wanted. My goal was to approximate the original color of the bike. I ended up with Rust-Oleum Painter's Touch Gloss Deep Blue. Last night I used a piece of wooden rod as a test sample.
Yeah, that'll do.
Yeah, that'll do.
__________________
My Bikes
My Bikes
Likes For Andy_K:
#188
Senior Member
Thread Starter
Well I doubt this will score me favor with the judge(s) but just today I stumbled upon a free Raleigh on Portland CL. This particular model weighs about 150lbs. Other than that it's biggest flaw is the RD, which the rear wheel seems to have eaten. Plan: fix it, ride the requisite 100 miles, then drop off at Goodwill.
edit: so having posted this on my phone I did not realize the pic focus was poo. Will take better pics tomorrow.
edit: so having posted this on my phone I did not realize the pic focus was poo. Will take better pics tomorrow.
#189
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,630
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4677 Post(s)
Liked 5,790 Times
in
2,279 Posts
Kinda FIFY, except we need to remove the "no" from the sentence. Plan is to do the 100km in one shot from Andy's place.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#190
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
Alright, it looks like I'm in on this challenge with a $15 Rampar I picked up today from a nice guy one town to the north. It's rusty and crusty. Pic from the ad.
I spent a fair amount of time this evening with cleaning it up and will share some process pics in another post. Right now it looks like I'll dip into my used cable stash and possibly pull a pair of Kenda 27s out of the scrap here. Hopefully I can make the tubes that came with the bike work, although the front may be missing a valve stem.
I spent a fair amount of time this evening with cleaning it up and will share some process pics in another post. Right now it looks like I'll dip into my used cable stash and possibly pull a pair of Kenda 27s out of the scrap here. Hopefully I can make the tubes that came with the bike work, although the front may be missing a valve stem.
#192
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
#193
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
I applaud anybody putting a new paint job on one of these clunkers. That really is the extra mile. The stock paint on this Rampar, however, is staying. Looks like a seafoam that has faded nicely with a celeste-ish undercoat. A surprise find when I pulled the fork. First thing, though - couldn't bring myself to toss this rusty chain after measuring. The tape is held on with the 1 inch mark lined up centered on a pin.
Then I noticed the claw hanger was a bit out of sorts.
So, I removed the chain and gave it a bath.
Everything got a generous shot of PB Blaster and I began breaking it down further. The seatpost wasn't a huge struggle, but the stem was. Making progress:
It eventually succumbed to brute force. The bottom bracket was not a problem but did yield some sort of grease-fossilized winged creature.
Then I noticed the claw hanger was a bit out of sorts.
So, I removed the chain and gave it a bath.
Everything got a generous shot of PB Blaster and I began breaking it down further. The seatpost wasn't a huge struggle, but the stem was. Making progress:
It eventually succumbed to brute force. The bottom bracket was not a problem but did yield some sort of grease-fossilized winged creature.
Last edited by BFisher; 05-17-21 at 07:03 AM.
#194
Senior Member
Join Date: Aug 2013
Posts: 2,321
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,898 Times
in
889 Posts
The bottom bracket came apart fine, although I did find some pitting on the race/spindle surfaces. Interior shot for grins.
And the bottom of the shell:
The fork out - note the previously mentioned undercoat, and hydration reserves stored in the reflector, which will stay.
And finally for now the afterbath aftermath of that chain. I think I'm in business!
And the bottom of the shell:
The fork out - note the previously mentioned undercoat, and hydration reserves stored in the reflector, which will stay.
And finally for now the afterbath aftermath of that chain. I think I'm in business!
#195
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
Here's the saddle from a 1973 Nishiki after disassembly but before any other clean up.
Brushing off the flakes and soaking in EvapoRust wasn't enough to make this look decent again.
But a bit more sanding to get it smooth-ish and some chrome paint on the rails, and "Presto!"
Now reassembled.
With a mere $5 worth of paint, I've turned a piece of garbage into a $2 saddle!
The $5 can of chrome paint is supposed to cover 25 square feet, so I can probably repeat this on a few more parts. Will it hold up to use? Probably not, but it'll still look much better than it did before I tried this.
__________________
My Bikes
My Bikes
#196
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
That actually came out much better than I expected. I've seen videos comparing vinegar to various commercial rust removers and as I recall the vinegar was competitive, but that chain was pretty far gone. I'd still probably hit that with a wire brush or something, and maybe check to make sure my tetanus shot was up-to-date.
__________________
My Bikes
My Bikes
#197
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,024
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 437 Post(s)
Liked 925 Times
in
370 Posts
I drove up hwy 47 two weeks ago and thought it would be a great ride. I would also like to drop a frame at the atelier for some TLC. hmmm...
__________________
72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
#198
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
Got a clunker to build?
__________________
My Bikes
My Bikes
#199
Senior Member
Yeah, since you and @Insidious C. were along on the ride when we first noticed the Takara, it seems like destiny that we should repeat that journey.
__________________
I.C.
I.C.
#200
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,742
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,862 Times
in
1,439 Posts
Well, we've got to get it done before August 7. Otherwise, I guess it's open to negotiation. You've already done the hard part of the ride. Everything except the Banks-Vernonia section is pancake flat, so it's just a matter of adding a little distance. That and making sure you're able to shift into the small ring on whatever bike you take.
__________________
My Bikes
My Bikes