Looking for a classic steel frame bike
#27
Member
Thread Starter
Yes, if parts can be salvaged. I was so tempted to convert my Nashbar Sport RX to a fixie, but all the components are original ( with the exception of the seat ) , so I decided to sell it instead of cannibalize it. Better to play around with a cheap fixed gear than strip a nice old chromoly classic.
#28
Bikes are okay, I guess.
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 6,938
Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT
Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,446 Times
in
1,557 Posts
You mentioned 3-speeds. Here's a thread to skim if your interest leans that way:
https://www.bikeforums.net/classic-v...-3-speeds.html
However, the laid-back ethos of the 3-speed might not be what you're looking for, although the limited gearing range is probably adequate for your flatlands. Most 3-speed riders stick with the stock sized wheels (usually 26 x 1 3/8") and don't bother with 650B conversion as the 27"/700C crowd does; that would be a lot of trouble and expense for very little difference. Good luck and have fun!
https://www.bikeforums.net/classic-v...-3-speeds.html
However, the laid-back ethos of the 3-speed might not be what you're looking for, although the limited gearing range is probably adequate for your flatlands. Most 3-speed riders stick with the stock sized wheels (usually 26 x 1 3/8") and don't bother with 650B conversion as the 27"/700C crowd does; that would be a lot of trouble and expense for very little difference. Good luck and have fun!
#29
Member
Thread Starter
Thanks for the reply Thumpism. I'm doing more research and taking my time looking to see what pops up on the local Craigslist or Facebook Marketplace. I think I have leaned away from the British bikes due to wanting to have a bit more options. I am selling a few more of my bikes to clear garage space and maybe use that money and some tax refund money to open more possibilities.
#30
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,693
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1531 Post(s)
Liked 1,527 Times
in
915 Posts
Gino71 , may I ask why no 26" wheeled bikes? Old '80s and '90s steel mountain bikes are cheap to buy and very versatile. There are C&V threads to show off your drop bar conversions and to show off your upright urban conversions; people have made some pretty amazing bikes.
#31
Member
Thread Starter
Korina, honestly ... I don't know why. I have seen some very good deals locally for old Specialized Rockhoppers and HardRocks.
Likes For Gino71:
#32
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Rock Hoppers are the bomb. I found this one last year for $65 needing a bit of gear work and then did a tire swap to some nice plush city tires. Smooth ride
#33
Member
Thread Starter
Wow! That is gorgeous!
Likes For Gino71:
#34
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,693
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1531 Post(s)
Liked 1,527 Times
in
915 Posts
I know it's not what you're looking for, but here's my stylin' sturdy steel street steed. Those are 26" x 2" road tires; very cushy.
#35
Member
Thread Starter
That is an amazing shade of purple ( don't tell me it's gold ) on the Rockhopper!
#36
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26382 Post(s)
Liked 10,361 Times
in
7,196 Posts
Gino71 , may I ask why no 26" wheeled bikes? Old '80s and '90s steel mountain bikes are cheap to buy and very versatile. There are C&V threads to show off your drop bar conversions and to show off your upright urban conversions; people have made some pretty amazing bikes.
Here is a 3 speed Raleigh Sports that I set up to ride the gravel levee tops here where I live. All the British 3 speeds are similar, but to get access to slightly wider tires you need to build wheels with 26" rims and get brakes with the reach to fit the smaller new rims. And like someone already said, most of the Raleigh 3 speed bikes have quirky threading and cottered cranks. Early mountain bikes are the most bang for your buck, and some of them are excellent in the quality of frame materials and components.
#37
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 466 Post(s)
Liked 527 Times
in
266 Posts
Early, "Rigid" mountain bikes give good bang for your buck:
1991 Gary Fisher Montare. Added bar, grips, saddle, blinkie, used fenders
1988 HKII as found, + new saddle
1988 HKII current setup: New Saddle, VO Porteur bar and new grips
1987 Hoo Koo E Koo + Co-Op Saddle + Trial setup with reversed Nitto Bar, but will likely go with upright bar. Still to mount: Used Fender Set and new 2" Maxis
1991 Gary Fisher Montare. Added bar, grips, saddle, blinkie, used fenders
1988 HKII as found, + new saddle
1988 HKII current setup: New Saddle, VO Porteur bar and new grips
1987 Hoo Koo E Koo + Co-Op Saddle + Trial setup with reversed Nitto Bar, but will likely go with upright bar. Still to mount: Used Fender Set and new 2" Maxis
Last edited by ollo_ollo; 02-16-20 at 06:12 PM. Reason: add info
Likes For ollo_ollo:
#38
Happy banana slug
Join Date: Sep 2015
Location: Arcata, California, U.S., North America, Earth, Saggitarius Arm, Milky Way
Posts: 3,693
Bikes: 1984 Araya MB 261, 1992 Specialized Rockhopper Sport, 1993 Hard Rock Ultra, 1994 Trek Multitrack 750, 1995 Trek Singletrack 930
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1531 Post(s)
Liked 1,527 Times
in
915 Posts
Likes For Korina:
#39
Senior Member
There is a nice Niko on the Tampa craigslist for $85. Go to the E-Bay Craigslist thread.
#40
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
I would look for a '10 speed' from Miyata, Fuji, or Nishiki, or other Japanese made brands... Centurion? Others? Preferably late 70s or Early 80s.
Also Raleighs from the same era should have mostly standard threading and sizes for replacements.
Lots of old bikes will have 27" wheels which are usually pretty straightforward to replace with 700 wheels, which adds a bit of tire clearance so you can run 35 or 38mm tires for mixed surfaces without a problem.
Also Raleighs from the same era should have mostly standard threading and sizes for replacements.
Lots of old bikes will have 27" wheels which are usually pretty straightforward to replace with 700 wheels, which adds a bit of tire clearance so you can run 35 or 38mm tires for mixed surfaces without a problem.
#41
Senior Member
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,989
Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione
Mentioned: 166 Post(s)
Tagged: 0 Thread(s)
Quoted: 500 Post(s)
Liked 466 Times
in
256 Posts
I would look for a '10 speed' from Miyata, Fuji, or Nishiki, or other Japanese made brands... Centurion? Others? Preferably late 70s or Early 80s.
Also Raleighs from the same era should have mostly standard threading and sizes for replacements.
Lots of old bikes will have 27" wheels which are usually pretty straightforward to replace with 700 wheels, which adds a bit of tire clearance so you can run 35 or 38mm tires for mixed surfaces without a problem.
Also Raleighs from the same era should have mostly standard threading and sizes for replacements.
Lots of old bikes will have 27" wheels which are usually pretty straightforward to replace with 700 wheels, which adds a bit of tire clearance so you can run 35 or 38mm tires for mixed surfaces without a problem.
#42
Señor Member
Join Date: Feb 2013
Posts: 5,066
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Liked 292 Times
in
215 Posts
Good recommendations including those 27” to 700C thoughts, but don’t overlook the 12-speed Miyatas (912, 712, and later 312’s). The paint jobs on those Miyatas seem to hold up extremely well, judging from my own ‘79 912, my daughter’s, friends’ and many others of that brand that come through where I volunteer rebuilding bikes.
Other brands to look for are:
Bridgestone
Raleigh (often not as nice as the Japanese made bikes but still solid platforms for building fun bikes)
Trek (older lugged frame construction is more desirable IMO)
Paramount (Schwinn's Japanese (later Taiwanese) made performance line)
#43
Member
Thread Starter
Those Gary Fisher bikes are gorgeous! What model is that first pic?
Thanks so much for all the replies! I truly appreciate it!
Thanks so much for all the replies! I truly appreciate it!