Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Anyone got a drop bar 3 speed? Pics are always a plus, of course!

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Anyone got a drop bar 3 speed? Pics are always a plus, of course!

Old 11-23-22, 02:48 PM
  #76  
rudypyatt
Full Member
 
Join Date: Jan 2008
Location: Brooklyn
Posts: 341

Bikes: Windsor TimeLine; Linus Gaston 3; Sears Free Spirit

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 99 Times in 46 Posts
Originally Posted by SirMike1983
Yes - some riders who tend to push harder and are more particular about cadence will like the AM medium ratio. If you have to have it even closer together, the rarely-seen AC close-ratio hub is another option. Another possibility is the FM four-speed medium ratio, which has fairly tight gearing but an extra speed.

I guess the other possibility would be to get an S3X hub and run it with a freewheel. I think that hub goes low to high from 62 percent underdrive to 78 percent to 100 percent/direct top gear.
rudypyatt is offline  
Old 11-23-22, 04:52 PM
  #77  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1646 Post(s)
Liked 1,785 Times in 1,041 Posts
Originally Posted by SirMike1983
Yes - some riders who tend to push harder and are more particular about cadence will like the AM medium ratio. If you have to have it even closer together, the rarely-seen AC close-ratio hub is another option. Another possibility is the FM four-speed medium ratio, which has fairly tight gearing but an extra speed.
And another possibility is Sturmey's newish XRF4: an even 28% between gears, 210% total range. Dual paddle, thumb and twist shifters offered.
tcs is offline  
Likes For tcs:
Old 11-23-22, 07:37 PM
  #78  
clubman 
Phyllo-buster
 
clubman's Avatar
 
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,831

Bikes: roadsters, club bikes, fixed and classic

Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2287 Post(s)
Liked 2,032 Times in 1,245 Posts
If you're lucky and the town centre is 1 km from your home, a two speed Duomatic fills the gap. I 'had' drop bars, honest. (yes fender line sux)

clubman is offline  
Old 11-23-22, 07:56 PM
  #79  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,634 Times in 1,671 Posts
Originally Posted by clubman
If you're lucky and the town centre is 1 km from your home, a two speed Duomatic fills the gap. I 'had' drop bars, honest. (yes fender line sux)

very cool.
52telecaster is offline  
Old 11-23-22, 11:09 PM
  #80  
Oldairhead 
RUSA #3100
 
Oldairhead's Avatar
 
Join Date: Feb 2012
Location: Oregon City
Posts: 834

Bikes: Yes

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 234 Post(s)
Liked 486 Times in 178 Posts
I love it when a 10 year old thread comes back to life as if it was just last week!
__________________
https://utahrandonneur.wordpress.com
Oldairhead is offline  
Old 11-24-22, 06:39 AM
  #81  
Imazagi
Newbie
 
Imazagi's Avatar
 
Join Date: Oct 2022
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 23 Times in 12 Posts
Love those builds.
I recently found a Dusika, converted to 26" wheels with a coaster brake 3-speed Sachs Torpedo. I'll have to clean and regrease the hub but it will become a light barebones city commuter.
Imazagi is offline  
Likes For Imazagi:
Old 11-24-22, 08:17 AM
  #82  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
I952 rudge club-style bike, 27” wheels, Al rims, AW or FM hub, 531 straight tubing, AL seatpost, stem, GB bar, TA 5-vis chainset, GB caliper brakes / levers.

Pic when I first got it:



Rudge Aero Special more or less as received.
Road Fan is offline  
Likes For Road Fan:
Old 11-24-22, 09:26 AM
  #83  
tiger1964 
Senior Member
 
tiger1964's Avatar
 
Join Date: Apr 2011
Location: Maryland, USA
Posts: 2,414

Bikes: Drysdale/Gitane/Zeus/Masi/Falcon/Palo Alto/Raleigh/Legnano

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 967 Post(s)
Liked 615 Times in 394 Posts
Originally Posted by pastorbobnlnh
I do remember looking through this thread over a decade ago and thinking, "I'll never build one of those---
Yeah, I don't see where you're going to fit a freewheel on that, unless as an ornament.

After New Years, planning on spending much more time & $$$ on the bike collection and get a few more on-the-road; at/near top of list is the Falcon and I want what this thread describes except an IGH of more gears especially to give more ratios in mid-range. Alas, going from website to website and most IGH's are "out of stock" and have been for all of 2022.
__________________
Larry:1958 Drysdale, 1961 Gitane Gran Sport, 1974 Zeus track, 1988 Masi Gran Corsa, 1974 Falcon, 1980 Palo Alto, 1973 Raleigh Gran Sport, 1974 Legnano. Susan: 1976 Windsor Profesional.


tiger1964 is offline  
Old 11-24-22, 10:16 AM
  #84  
capnjonny 
Senior Member
 
capnjonny's Avatar
 
Join Date: Nov 2014
Location: Saratoga calif.
Posts: 1,047

Bikes: Miyata 610(66cm), GT Vantara Hybrid (64cm), Nishiki International (64cm), Peugeot rat rod (62 cm), Trek 800 Burning Man helicopter bike, Bob Jackson frame (to be restored?) plus a never ending stream of neglected waifs from the Bike exchange.

Mentioned: 28 Post(s)
Tagged: 0 Thread(s)
Quoted: 339 Post(s)
Likes: 0
Liked 623 Times in 225 Posts

Raleigh Sport "Scorcher" w/ inverted bars and 24 tooth rear cog 31 lbs as shown
capnjonny is offline  
Likes For capnjonny:
Old 11-24-22, 04:34 PM
  #85  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Originally Posted by pastorbobnlnh
I do remember looking through this thread over a decade ago and thinking, "I'll never build one of those--- (because I was living in the NH mountains and a SA-AW just can't make the grade)!

Fast forward, and here I am, the end of 2022, living on a pancake flat coastal island, converting a 1975 Schwinn Voyageur II into a 3-speed utilizing a 1951 SA-AM hub! Go figure!

Still, lots of work to do!
Bob, I don’t know what your ultimate build plan is, but my Rudge (the frame is from 1952) has some odd OLDs The rear is 114 mm across the rear dropout faces, and the front fork is about 85 or 88 mm across between the inner faces of my fork blades. Both the original Raleigh front hub and the original SA 1952 AW match their respective mounting points very well, and both appear to be the OEM parts. If one big bike company decided to make a bike like this with such small cpacings why not others?. If you have such narrow spacings, it might be best to get . It might be difficult to implement a more standard set of spacings, including any with a freewheel using more than 5 sprockets, unless the chain is very carefully draped into place, or if I take it out to be aligned front and rear.

I had originally planned my build with the original 3 speed AW hub or an FM, and a triple freewheel with a derailleur. Finally I’ve decided to go for just an IGH.
Road Fan is offline  
Likes For Road Fan:
Old 11-24-22, 09:56 PM
  #86  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1646 Post(s)
Liked 1,785 Times in 1,041 Posts
Alpha & Omega drop bar 3-speed: the Raleigh Record Ace

https://on-the-drops.blogspot.com/20...1933-1942.html

These bikes were long-distance record setters, time trial champions and ridden to wins in the rare British mass start races.
tcs is offline  
Likes For tcs:
Old 11-25-22, 07:11 AM
  #87  
pastorbobnlnh 
Freewheel Medic
 
pastorbobnlnh's Avatar
 
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,878

Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)

Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1448 Post(s)
Liked 2,177 Times in 957 Posts
Originally Posted by Road Fan
Bob, I don’t know what your ultimate build plan is... It might be difficult to implement a more standard set of spacings, including any with a freewheel using more than 5 sprockets, unless the chain is very carefully draped into place....

I had originally planned my build with the original 3 speed AW hub or an FM, and a triple freewheel with a derailleur. Finally I’ve decided to go for just an IGH.
52telecaster tiger1964 and Road Fan, I'm not including a freewheel in this build. My alignment is great despite the 122mm distance between the dropouts.

I'm going to give it a try with the current SA-AM medium spaced gear range and the 47T X 19T chainring and sprocket.

And BFisher thank you for noticing the crankset. It is from an early 1950s ladies Schwinn Superior. I've hung onto this crankset and its BB for 10-15 years, always not certain how I'd use it. It is a bit natty, but it will work on this build just fine!
__________________
Bob
Enjoying the GA coast all year long!

Thanks for visiting my website: www.freewheelspa.com





pastorbobnlnh is online now  
Likes For pastorbobnlnh:
Old 11-25-22, 07:44 AM
  #88  
bikamper
1991 PBP Anciens
 
bikamper's Avatar
 
Join Date: Nov 2009
Location: Elburn, Illannoy
Posts: 594

Bikes: 1954 Robin Hood, 1964 Dunelt, 1968 Raleigh Superbe, 1969 Robin Hood, 197? Gitane, 1973 Raleigh SuperCourse, 1981 Miyata 710, 1990 Miyata 600GT, 2007 Rivendell Bleriot

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 54 Post(s)
Liked 241 Times in 94 Posts
Seventies something Mercier with an FW modified to 3 speed fixed gear. Clobbered by a car.


1973 Super Course. What parts survived from the Mercier were hung on this.


Sixties Dunelt Fluer des Lys(spelling) AW with two rear cogs. Built it up for my SIL who decided he didn't like riding bikes.


1970 Robin Hood Lenton Sports. Owned since new but has gone through several changes. Currently has an AM with a triple Cyclo cluster.


And just to stir things up a bit. The red one is a 1954-ish Robin Hood with a manually shift Bendix 2 speed converted to 2 speed fixed gear. The bluish one is a 2007 Rivendell Bleriot with a Sram S7.

bikamper is offline  
Old 11-25-22, 05:11 PM
  #89  
rudypyatt
Full Member
 
Join Date: Jan 2008
Location: Brooklyn
Posts: 341

Bikes: Windsor TimeLine; Linus Gaston 3; Sears Free Spirit

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 43 Post(s)
Liked 99 Times in 46 Posts
Originally Posted by tcs
Alpha & Omega drop bar 3-speed: the Raleigh Record Ace

https://on-the-drops.blogspot.com/20...1933-1942.html

These bikes were long-distance record setters, time trial champions and ridden to wins in the rare British mass start races.
So much this.
rudypyatt is offline  
Likes For rudypyatt:
Old 11-26-22, 08:44 AM
  #90  
Road Fan
Senior Member
 
Road Fan's Avatar
 
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,853

Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8

Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1851 Post(s)
Liked 654 Times in 498 Posts
Hello Bob, sorry for any misunderstanding. In your post about this bike, you finished with this statement: “I had originally planned my build with the original 3 speed AW hub or an FM, and a triple freewheel with a derailleur. Finally I’ve decided to go for just an IGH.” That is what I was responding to. Yes, it does not say you plan to build with a 3 sp freewheel or any other type.
Road Fan is offline  
Likes For Road Fan:
Old 12-05-22, 03:33 PM
  #91  
grant40
Senior Member
 
grant40's Avatar
 
Join Date: Sep 2021
Posts: 718
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 259 Post(s)
Liked 343 Times in 202 Posts

grant40 is offline  
Likes For grant40:
Old 12-06-22, 05:00 PM
  #92  
adventurepdx
Senior Member
 
adventurepdx's Avatar
 
Join Date: Feb 2010
Location: Portland, Oregon
Posts: 1,024
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 163 Post(s)
Liked 68 Times in 48 Posts
Glad this thread got revived. Since this thread has started, I've had two drop-bar three speeds:
The first was a 50's Rudge that was given to me and I had fixed up. I had this for two years, from 2012 to 2014. The 21 inch frame was on the small size, if it wasn't, I would have kept this bike longer:


Then someone gave me a 23" Robin Hood frame around 2017 or so. Since I had (and still have) an upright Raleigh Superbe, I decided to build it up as a drop-bar path-racer. With the Rudge I simply flipped some North Roads, but with the Robin Hood I splurged and got a pair of Soma Lauterwassers. I rode this bike from 2018 until last year, until issues with the frame
made me scrap the bike.



Perhaps I'll build another drop bar three speed at some point, maybe with a nicer frame as the base.
adventurepdx is offline  
Likes For adventurepdx:
Old 12-07-22, 03:20 AM
  #93  
Imazagi
Newbie
 
Imazagi's Avatar
 
Join Date: Oct 2022
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 23 Times in 12 Posts
Not a drop bar, but a converted drop bar bike. I recently barn-found this Dusika, already converted by someone to 26" wheels with a Sachs 3-speed coaster hub. I added the porteur rack and bars and some graphics and it's now a fun and aggressive city bike.

Imazagi is offline  
Old 12-07-22, 07:23 AM
  #94  
BFisher
Senior Member
 
Join Date: Aug 2013
Posts: 2,336
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 767 Post(s)
Liked 1,897 Times in 889 Posts
Originally Posted by Imazagi
Not a drop bar, but a converted drop bar bike. I recently barn-found this Dusika, already converted by someone to 26" wheels with a Sachs 3-speed coaster hub. I added the porteur rack and bars and some graphics and it's now a fun and aggressive city bike.
Well, those bars do look to have a slight bit of drop, so I say it counts. Lovely crankset, by the way.
BFisher is offline  
Likes For BFisher:
Old 12-07-22, 08:04 AM
  #95  
Ged117 
Senior Member
 
Ged117's Avatar
 
Join Date: May 2018
Location: Ottawa, Ontario, Canada
Posts: 580

Bikes: 1951 Sun Wasp, 1953 Armstrong Consort, 1975 Raleigh Competition, 1980 Apollo Gran Sport, 1988 Schwinn Voyageur, Mystery MTB

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 445 Times in 189 Posts
This is one of those threads that I saved and come back to regularly for inspiration. Nice to see it up and about!

Here's my '51 Sun Wasp, with DB 531 tubing which originally was set up to race in continental style "massed start" events, so it came with derailleur gearing and has the braze-ons for cable routing. I got it as a frame from a BFer, and decided to run it like an early '50s club machine, with an alloy '53 SA FW hub gear. GB alloy stem, VO seat post. These Velocity rims I got essentially for free so I used them at the time, but I don't care for the look so I've managed to find a 40h 700c rim (Sun CR-16 from eBay, NOS) that I will be lacing the hub to, with a matching front rim laced to a high-flange Normandy hub from the '60s. I've since replaced the late '50s era B17 narrow saddle which was quite uncomfortable with a contemporary B17. I plan on dark blue handlebar tape for next year, the orange isn't doing it for me. Alloy crank, and chainring is a Surly steel one at 48T, and the hub has a 20T sprocket, which makes this guy perfect for our rolling hills and flattish pathways. I saved the original Bayliss-Wiley BB I had to go with a Williams crank in a drawer for "later", so I run a nice quality Tange cartridge BB. It has a fork lamp mount, so I'm going to re-wire an SA lamp set off of a 1948 Clubman and get it on the bike and use a bottle dynamo to run it with LED bulbs. I also have a set of 700c 1970s French alloy mudguards that I plan to install to spruce things up. The paint has certainly failed, but I keep the exposed steel parts nice and oiled / preserved with wax until I decide what I want to do with it.

Ged117 is offline  
Likes For Ged117:
Old 12-07-22, 09:05 AM
  #96  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1646 Post(s)
Liked 1,785 Times in 1,041 Posts
Originally Posted by Ged117
...and use a bottle dynamo...


And in 2022, driving LED lamp:




Last edited by tcs; 12-07-22 at 09:15 AM.
tcs is offline  
Likes For tcs:
Old 12-07-22, 09:15 AM
  #97  
Ged117 
Senior Member
 
Ged117's Avatar
 
Join Date: May 2018
Location: Ottawa, Ontario, Canada
Posts: 580

Bikes: 1951 Sun Wasp, 1953 Armstrong Consort, 1975 Raleigh Competition, 1980 Apollo Gran Sport, 1988 Schwinn Voyageur, Mystery MTB

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 445 Times in 189 Posts
Originally Posted by tcs

Heh! I have '46 and '47 dated dynohubs with the bakelite cover, along with a '62 dyno, in my stores. I run a '75 GH6 on my Triumph Sports, which works great in its role. For the Wasp, lightweight running is my target, so using the high-flange Normandy hub up front and a bottle dynamo to run the lamps saves a few pounds over a chrome steel dynohub. They are very cool and functional C&V technology, especially paired with LEDs, but they are heavy and in my experience make the front handling of a lightweight road bike feel kind of leaden.
Ged117 is offline  
Likes For Ged117:
Old 12-07-22, 09:19 AM
  #98  
Ged117 
Senior Member
 
Ged117's Avatar
 
Join Date: May 2018
Location: Ottawa, Ontario, Canada
Posts: 580

Bikes: 1951 Sun Wasp, 1953 Armstrong Consort, 1975 Raleigh Competition, 1980 Apollo Gran Sport, 1988 Schwinn Voyageur, Mystery MTB

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 445 Times in 189 Posts
Originally Posted by tcs

And in 2022, driving LED lamp:



How do you like the bar end SA shifter? I wish they'd made one for the four-speed hubs, though my period trigger shifter is working OK, eventually it'll wear out.

My FW is due for a service, so at some point this winter I'll give it a going-through. My original idea was to find an FM hub, but folks on here reported their being a bit more sensitive than the FW, so I found one of those instead. Is the AM as fuss-free as the AW?
Ged117 is offline  
Old 12-07-22, 09:23 AM
  #99  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1646 Post(s)
Liked 1,785 Times in 1,041 Posts
BTW, those Dynohub terminals are British standard B2A 'sparkplug' threads, if anybody wants to get some brass thumb nuts for quick disconnect.



PS: Why is there so much axle showing? This was a NIB (!) 1978 Dynohub with 36 spoke holes (American, not Raleigh) and a 90mm OLD (roadster spacing). Well, no wonder it was still NIB! So I replaced the GL621A axle with a generic 3/8 x 26 one, substituting Locktite for the shoulder stop on the Sturmey part.

Last edited by tcs; 12-07-22 at 09:42 AM.
tcs is offline  
Likes For tcs:
Old 12-07-22, 09:30 AM
  #100  
tcs
Palmer
 
tcs's Avatar
 
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,580

Bikes: Mike Melton custom, 1982 Stumpjumper, Alex Moulton AM, 2010 Dawes Briercliffe, 2017 Dahon Curl i8, 2021 Motobecane Turino 1x12

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1646 Post(s)
Liked 1,785 Times in 1,041 Posts
Originally Posted by Ged117
How do you like the bar end SA shifter?
It's great, with a nice 'click' action and no falsies, although if anyone is going for period aesthetics they should stick with the trigger.

tcs is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.