Wheels - lighter weight vs aero
#276
Grupetto Bob
Join Date: Sep 2020
Location: Seattle-ish
Posts: 5,009
Bikes: Bikey McBike Face
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 2015 Post(s)
Liked 4,077 Times
in
2,210 Posts
#277
Senior Member
Join Date: Mar 2010
Posts: 1,368
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 996 Post(s)
Liked 1,041 Times
in
528 Posts
Interesting read on several counts.
The acceleration comparison was interesting to show the effect of wheel rotational inertia on power:-
Full bore sprint acceleration from 40 kph at 0.13G requires 1067W for the bike/rider + 9.2W for wheel rotational inertia. Reducing wheelset mass by 300g and wheel inertia by 23.5% gives a reduction in required power of 4W, of which only 0.6W is due to the reduction in rotational inertia. You get that whopping advantage for as long as you can accelerate at 0.13G i.e. a few seconds at most until your speed tops out.
The acceleration comparison was interesting to show the effect of wheel rotational inertia on power:-
Full bore sprint acceleration from 40 kph at 0.13G requires 1067W for the bike/rider + 9.2W for wheel rotational inertia. Reducing wheelset mass by 300g and wheel inertia by 23.5% gives a reduction in required power of 4W, of which only 0.6W is due to the reduction in rotational inertia. You get that whopping advantage for as long as you can accelerate at 0.13G i.e. a few seconds at most until your speed tops out.
Last edited by Atlas Shrugged; 02-18-23 at 10:31 AM.
#278
Senior Member
Join Date: May 2021
Posts: 6,322
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 3218 Post(s)
Liked 3,525 Times
in
2,223 Posts
It doesn't help when you get bike reviewers saying how they can "feel" the improved acceleration of lighter wheels, when they are just a few hundred grams lighter. Plus they often assume it's mainly due to rotational inertia rather than just the extra bike mass.
Likes For PeteHski:
#279
Resident PIA
Join Date: Jul 2004
Location: City of Oaks, NC
Posts: 728
Bikes: Gunnar Roadie, Look 765 Optimum, Spesh Aethos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 155 Post(s)
Liked 284 Times
in
148 Posts
How much longer until Spring?
.
.
__________________
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
--
Shad
I knew where I was when I wrote this
I don't know where I am now...
05 Gunnar Roadie Chorus/Record
67'er
#280
Senior Member
I'm an antique slug. I don't race anyone and don't pretend to be "training". I prefer light wheels cos they make the bike feel more responsive and I like that. Makes my rides more enjoyable. And that's all that matters to me.
Ride whatever for whatever reason. If it makes you happy that's all that really matters this side of the TdF.
Ride whatever for whatever reason. If it makes you happy that's all that really matters this side of the TdF.
#282
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 800
Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 322 Post(s)
Liked 664 Times
in
320 Posts
#283
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 15,650
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 8934 Post(s)
Liked 10,001 Times
in
5,088 Posts
Likes For genejockey:
#284
Senior Member
Join Date: Mar 2010
Posts: 1,368
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 996 Post(s)
Liked 1,041 Times
in
528 Posts
Probably not, but the these silly old beliefs are somehow imprinted on a cadre of older riders who frequent these forums. From the effect of lighter wheels to not participating in marital relations before a big ride we have learned a lot over the past 50 years.
#285
Senior Member
Join Date: Jul 2009
Posts: 5,194
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3434 Post(s)
Liked 6,224 Times
in
2,516 Posts
#286
Klaatu..Verata..Necktie?
Join Date: May 2007
Location: SF Bay Area
Posts: 15,650
Bikes: Litespeed Ultimate, Ultegra; Canyon Endurace, 105; Battaglin MAX, Chorus; Bianchi 928 Veloce; Ritchey Road Logic, Dura Ace; Cannondale R500 RX100; Schwinn Circuit, Sante; Lotus Supreme, Dura Ace
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 8934 Post(s)
Liked 10,001 Times
in
5,088 Posts
#287
Senior Member
Join Date: May 2021
Posts: 6,322
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 3218 Post(s)
Liked 3,525 Times
in
2,223 Posts
There is no more work required on the “model”. It already includes wheel rotational inertia. You just don’t like to hear the result that it isn’t important - not even at peak acceleration in a sprint. Or are you going to argue that Newton’s laws of motion are incorrect?
#288
Firm but gentle
The Real World
That SwissSide article also has a neat representation of the micro speed variations during the pedal stroke. Note the swings are actually higher with lower rotational weight.

Quote: "Although the total kinetic energy of a bicycle is the sum of translational and rotational kinetic energy, rotational energy is only a tiny part of the total. Reducing rotational weight of rims, tires, and tubes saves energy only when the wheel is accelerating, and, as long as the rider doesn’t hit the brakes, he or she gets that energy back when the wheel is decelerating."
Quote: "Although the total kinetic energy of a bicycle is the sum of translational and rotational kinetic energy, rotational energy is only a tiny part of the total. Reducing rotational weight of rims, tires, and tubes saves energy only when the wheel is accelerating, and, as long as the rider doesn’t hit the brakes, he or she gets that energy back when the wheel is decelerating."
The Old Dullard and the Talented Engineer are equally strong and fit racers, and now their race takes an upward course. The Old Dullard is on his climbing wheels, with crappy old 28 spoke sew-up rims like these

Pity poor Old Dullard, I'm surprised he can even get from point A to point B on such equipment. Now look at the Talented Engineer, he has a modern deep section carbon aero rim (460 grams vs 290 gram sew-up rim). Let's assume all the tires in this scenario are in the 230 gram range, or whatever. The average grade is only 7%, but there are some steeper and shallower sections, as you encounter in the real world.
The Old Dullard attacks on the climb and puts some distance between himself and the Talented Engineer. Now the Talented Engineer is thrice ****ed because:
-He is behind
-He is moving slower
-His bicycle doesn't accelerate on a climb as efficiently.

Last edited by venturi95; 02-18-23 at 11:42 AM.
#289
The Wheezing Geezer
Join Date: Oct 2021
Location: Española, NM
Posts: 800
Bikes: 1976 Fredo Speciale, Jamis Citizen 1, Ellis-Briggs FAVORI, Rivendell Clem Smith Jr.
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 322 Post(s)
Liked 664 Times
in
320 Posts
There is no more work required on the “model”. It already includes wheel rotational inertia. You just don’t like to hear the result that it isn’t important - not even at peak acceleration in a sprint. Or are you going to argue that Newton’s laws of motion are incorrect?
The snider you get with your "Because..PHYSICS!!" argument, the lower my opinion of you becomes.
#290
Senior Member
Join Date: Jul 2009
Posts: 5,194
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3434 Post(s)
Liked 6,224 Times
in
2,516 Posts
Mister Hski, you have worked in F1, and thus you are one of the few people who I might envy. To be perfectly clear: I have a degree in a physical science (geology), a year of physics (only trig based), a year of calculus, and some graduate classes. I believe in science and physics and the power of numbers.
Originally Posted by vebturi95
The Old Dullard attacks on the climb and puts some distance between himself and the Talented Engineer. Now the Talented Engineer is thrice ****ed because:
-He is behind
-He is moving slower
-His bicycle doesn't accelerate on a climb as efficiently.
-He is behind
-He is moving slower
-His bicycle doesn't accelerate on a climb as efficiently.
#291
Senior Member
Join Date: Jul 2009
Posts: 5,194
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3434 Post(s)
Liked 6,224 Times
in
2,516 Posts
The problem with discussing physics on a forum like this, is that quite often someone with a minimal understanding of physics is the most vocal debater of someone that does understand physics. The latter participant sometimes resorts to "because ... physics" simply because the former does not understand the physics.
#292
Senior Member
Join Date: Sep 2017
Posts: 7,262
Mentioned: 35 Post(s)
Tagged: 0 Thread(s)
Quoted: 6502 Post(s)
Liked 10,147 Times
in
4,348 Posts
The problem with discussing physics on a forum like this, is that quite often someone with a minimal understanding of physics is the most vocal debater of someone that does understand physics. The latter participant sometimes resorts to "because ... physics" simply because the former does not understand the physics.
Likes For Koyote:
#293
Senior Member
Join Date: Jul 2009
Posts: 5,194
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3434 Post(s)
Liked 6,224 Times
in
2,516 Posts
#294
Senior Member
Join Date: May 2021
Posts: 6,322
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 3218 Post(s)
Liked 3,525 Times
in
2,223 Posts
How arrogant do you have to be to put your own subjective belief ahead of those guys at Swiss Side, Zipp, Best Bike Splits etc and people here with Physics, Maths and Engineering degrees? Maybe you could just argue that Newton’s second law is incomplete?
#295
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 5,963
Bikes: Scott Addict R1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 2409 Post(s)
Liked 2,420 Times
in
1,224 Posts
The climber with high power to bike+rider weight ratio attacks on the steepest section of the course, because it is where they:
- have the biggest advantage
- can inflict the most suffering on other riders
- stand the best chance of getting the biggest gap
A racer picks the weapon that inflicts the most damage on their competitors. For a course with significant steep sections, a climber's most effective weapon is often reduced weight.
__________________
Ride, Rest, Repeat
Ride, Rest, Repeat

Likes For terrymorse:
#296
Senior Member
Join Date: Jul 2009
Posts: 5,194
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3434 Post(s)
Liked 6,224 Times
in
2,516 Posts
As a racing tactic, it's quite realistic.
The climber with high power to bike+rider weight ratio attacks on the steepest section of the course, because it is where they:
A racer picks the weapon that inflicts the most damage on their competitors. For a course with significant steep sections, a climber's most effective weapon is often reduced weight.
The climber with high power to bike+rider weight ratio attacks on the steepest section of the course, because it is where they:
- have the biggest advantage
- can inflict the most suffering on other riders
- stand the best chance of getting the biggest gap
A racer picks the weapon that inflicts the most damage on their competitors. For a course with significant steep sections, a climber's most effective weapon is often reduced weight.
#297
Senior Member
Join Date: May 2021
Posts: 6,322
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 3218 Post(s)
Liked 3,525 Times
in
2,223 Posts
Side note, but this is one of the reasons why I left the P&R subforum, where my area of expertise often pops up. I would feel compelled to rebut nonsense, but it was almost always futile. When people's understanding of a subject is so low that they are embracing mythology, it's difficult to engage them with logic and evidence.
#298
Senior Member
Join Date: May 2021
Posts: 6,322
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 3218 Post(s)
Liked 3,525 Times
in
2,223 Posts
Sure, if you can save a kg in weight then you may gain the best part of a minute on a 1 hour alpine climb for the same power. But the effect of reduced rotational inertia for your 30 sec attack (where you are probably accelerating for a handful of seconds at most) is going to be ridiculously small.
#299
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 5,963
Bikes: Scott Addict R1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 2409 Post(s)
Liked 2,420 Times
in
1,224 Posts
Sure, if you can save a kg in weight then you may gain the best part of a minute on a 1 hour alpine climb for the same power. But the effect of reduced rotational inertia for your 30 sec attack (where you are probably accelerating for a handful of seconds at most) is going to be ridiculously small.
__________________
Ride, Rest, Repeat
Ride, Rest, Repeat

#300
Senior Member
Then there's the not well understood muscle fatigue effect of acceleration-deceleration on every pedal stroke. It's the "throwing a heavy ball a short distance vs. throwing a light ball a long distance" problem. It's certainly a small effect, given the wheel mass differences in question. But I'm not convinced (yet) it's ridiculously small.
Also since the heavier wheel maintains speed better it'd likely be less fatiguing.
Last edited by elcruxio; 02-18-23 at 02:33 PM.