Notices
Early Brifter Bikes - 7,8, and 9 Speed Not vintage, not new, but still loved!

8 speed cassette spacing

Old 07-17-21, 11:21 AM
  #1  
Steel1
Member
Thread Starter
 
Join Date: Jan 2018
Posts: 39
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked 15 Times in 11 Posts
8 speed cassette spacing

Hi,
I picked up a used Shimano Hyperglide XTR CS-900 12-28 cassette. I plan to put on road bike with Dura Ace RD-7403.
According to Sheldon Brown table, should be 1.8mm thick, 3mm spacing, and 4.8mm ctc spacing.

The 4 biggest cogs (18-28) are on a spider, and match the table dimensions. They have stamp “Q R”. Same for first loose cog (16T) and spacer.

But three smallest cogs (12,13, 14T) do not match. They are 2mm thick.
The 12T has expected 3mm integrated spacer.
The 13T has ~3.2mm integrated spacer.
These 3 have “Q” stamp.
These 3 don’t line up exactly with any of the Shimano dimensions in Sheldon table, 7 or 8 speed, so not sure what to make of it.

Do the smallest cogs sometimes have different dimensions, or should all cog in cassette be same?
I am wondering are the three smallest cogs original from the cassette, or a mash-up pulled from another cassette?
Will these work on 8 speed or cause shift problems?

Thanks in advance for any insight.



Steel1 is offline  
Likes For Steel1:
Old 07-17-21, 06:10 PM
  #2  
Steel1
Member
Thread Starter
 
Join Date: Jan 2018
Posts: 39
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked 15 Times in 11 Posts
Ok I can continue talking to myself and post my findings 😀

I searched a bunch of similar, but not exact, part images on the web. They look similar to mine, so that tended to make me think mine is still a complete original cassette. I also measured my Dura Ace 7400, and it had similar thickness (2mm on smaller cog, 1.8 on larger). Also second cog had thicker spacing… go figure.

So I installed the CS-900, didn’t even need to adjust anything (not even B screw). Shifts great!
Steel1 is offline  
Likes For Steel1:
Old 07-18-21, 12:26 AM
  #3  
Dfrost 
Senior Member
 
Dfrost's Avatar
 
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,729

Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione

Mentioned: 147 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Liked 183 Times in 121 Posts
The “Q” stamping indicate those that are part of the original cassette. The finish that looks common to all of them suggests that they are the original set. You’ll find that one in the table within this article from the Sheldon Brown compendium. It sounds like you’d already discovered that resource. Remember that DA 7400 stuff had some unique characteristics.

https://www.sheldonbrown.com/k8.shtml

Generally the spacing is pretty uniform, but as you’ve discovered, it can vary, especially with the outermost cogs. If the shifts are good, then you’re golden!
Dfrost is offline  
Likes For Dfrost:
Old 07-18-21, 10:11 AM
  #4  
ThermionicScott 
working on my sandal tan
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 20,315

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers)

Mentioned: 88 Post(s)
Tagged: 0 Thread(s)
Quoted: 2856 Post(s)
Liked 861 Times in 599 Posts
I believe this is the right techdoc for your cassette: https://si.shimano.com/api/publish/s...00-8Q-1206.pdf

The Sheldon tables imply that cassettes have uniform spacing, but as you're finding out, Shimano and others were willing to make things slightly uneven for better shifting. My 7-speed cassettes exhibit the same thing -- slightly wider spacing as you get to the small end of the cassette. Shimano hoped that by riveting a bunch of it together and making the remaining cogs and spacers unique, there would be less chance of spoiling this arrangement.
__________________
Originally Posted by chandltp View Post
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is online now  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.