Can a Suntour aRX FD handle a triple?
#1
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Western MI
Posts: 2,767
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 655 Post(s)
Liked 467 Times
in
301 Posts
Can a Suntour aRX FD handle a triple?
Going to reconfigure my Bridgestone 400 as a triple and hoping to use the original Suntour aRX derailleurs. RD is long cage and should be fine. Tentative plan is front rings 50x45x28 with rear 14-28 6spd freewheel.
Stated specs on aRX FD are pretty conservative. Anyone have experience using on a triple?
I have a Mountech FD as Plan B but am hoping to stick with the aRX. Thanks all!
Stated specs on aRX FD are pretty conservative. Anyone have experience using on a triple?
I have a Mountech FD as Plan B but am hoping to stick with the aRX. Thanks all!
#4
small ring
Join Date: Jul 2012
Location: PNW
Posts: 1,024
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 437 Post(s)
Liked 925 Times
in
370 Posts
Going to reconfigure my Bridgestone 400 as a triple and hoping to use the original Suntour aRX derailleurs. RD is long cage and should be fine. Tentative plan is front rings 50x45x28 with rear 14-28 6spd freewheel.
Stated specs on aRX FD are pretty conservative. Anyone have experience using on a triple?
I have a Mountech FD as Plan B but am hoping to stick with the aRX. Thanks all!
Stated specs on aRX FD are pretty conservative. Anyone have experience using on a triple?
I have a Mountech FD as Plan B but am hoping to stick with the aRX. Thanks all!
__________________
72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
72 Bob Jackson -- 74 Motobecane Grand Jubile -- 74 Sekine SHS 271 -- 80 Nishiki International
85 Shogun 800 -- 86 Tommasini Super Prestige -- 92 Specialized Rockhopper -- 17 Colnago Arabesque
#5
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,891
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4790 Post(s)
Liked 3,916 Times
in
2,547 Posts
I've got that gearing (7-speed) on my Raleigh Competition. I don't know if the FD is an aRX or just an aR, nor what the difference is between them. Works quite well. SunTour Power (ratchet) DT shifters.
Now, one thing I do routinely with the SunTours using triples is replace the bushing sleeve over the cage bolt with a stack of #4 washers so if the chain drags over it, it isn't wearing anything. I also make the stack a little shorter than the bushing to narrow the bottom of the cage and speed up shifting. I have to do more corrections to trim. but I've never spent so much time in the small cog that I've killed a FD with cage wear there. (I' killed a few with wear in my racing days where "the gear" was far more important than derailleur rub.)
Now, one thing I do routinely with the SunTours using triples is replace the bushing sleeve over the cage bolt with a stack of #4 washers so if the chain drags over it, it isn't wearing anything. I also make the stack a little shorter than the bushing to narrow the bottom of the cage and speed up shifting. I have to do more corrections to trim. but I've never spent so much time in the small cog that I've killed a FD with cage wear there. (I' killed a few with wear in my racing days where "the gear" was far more important than derailleur rub.)
Likes For daverup:
#7
Forum Moderator
Join Date: Jul 2007
Location: Kalamazoo MI
Posts: 20,630
Bikes: Fuji SL2.1 Carbon Di2 Cannondale Synapse Alloy 4 Trek Checkpoint ALR-5 Viscount Aerospace Pro Colnago Classic Rabobank Schwinn Waterford PMount Raleigh C50 Cromoly Hybrid Legnano Tipo Roma Pista
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 3085 Post(s)
Liked 6,566 Times
in
3,764 Posts
Thread moved from Sales to reggly C&V.
__________________
#8
Senior Member
Thread Starter
Join Date: Mar 2015
Location: Western MI
Posts: 2,767
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 655 Post(s)
Liked 467 Times
in
301 Posts
Apologies to all for rookie errant post location.
And gratitude to all for the insight on the capabilities of the aRX front derailleur. Looks like mine is going to see some triple duty!
And gratitude to all for the insight on the capabilities of the aRX front derailleur. Looks like mine is going to see some triple duty!
#9
Senior Member
Join Date: Oct 2011
Location: Fairplay Co
Posts: 9,512
Bikes: Current 79 Nishiki Custum Sport, Jeunet 620, notable previous bikes P.K. Ripper loop tail, Kawahara Laser Lite, Paramount Track full chrome, Raliegh Internatioanl, Motobecan Super Mirage. 59 Crown royak 3 speed
Mentioned: 26 Post(s)
Tagged: 1 Thread(s)
Quoted: 789 Post(s)
Liked 1,739 Times
in
630 Posts
I would say yes it will but suggest you go with a triple intended FD which will work better since the ARX is nothing special why not go with something you know will work better. I have same era slightly rough needs clean up similar looking Dear head I would let go of for basically shipping.
#11
Senior Member
Join Date: Nov 2011
Location: Port Angeles, WA
Posts: 7,922
Bikes: A green one, "Ragleigh," or something.
Mentioned: 194 Post(s)
Tagged: 0 Thread(s)
Quoted: 1627 Post(s)
Liked 630 Times
in
356 Posts
Easy-Peasy-Cino-squeezy. It was in the one last year, anyway.
IIRC that's a 52-40-30 up front and six cogs in back spanning 14 - 32.
IIRC that's a 52-40-30 up front and six cogs in back spanning 14 - 32.
__________________
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
● 1971 Grandis SL ● 1972 Lambert Grand Prix frankenbike ● 1972 Raleigh Super Course fixie ● 1973 Nishiki Semi-Pro ● 1979 Motobecane Grand Jubile ●1980 Apollo "Legnano" ● 1984 Peugeot Vagabond ● 1985 Shogun Prairie Breaker ● 1986 Merckx Super Corsa ● 1987 Schwinn Tempo ● 1988 Schwinn Voyageur ● 1989 Bottechia Team ADR replica ● 1990 Cannondale ST600 ● 1993 Technium RT600 ● 1996 Kona Lava Dome ●
Likes For Lascauxcaveman:
#13
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,498
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7345 Post(s)
Liked 2,452 Times
in
1,430 Posts
Sometimes, with a front derailleur intended for two chainrings, you can get it to work with three. And sometimes you can't. So whether it's intended to work or not, it's worth a try.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#14
Senior Member
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,891
Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder
Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 4790 Post(s)
Liked 3,916 Times
in
2,547 Posts
I've got that gearing (7-speed) on my Raleigh Competition. I don't know if the FD is an aRX or just an aR, nor what the difference is between them. Works quite well. SunTour Power (ratchet) DT shifters.
Now, one thing I do routinely with the SunTours using triples is replace the bushing sleeve over the cage bolt with a stack of #4 washers so if the chain drags over it, it isn't wearing anything. I also make the stack a little shorter than the bushing to narrow the bottom of the cage and speed up shifting. I have to do more corrections to trim. but I've never spent so much time in the small cog that I've killed a FD with cage wear there. (I' killed a few with wear in my racing days where "the gear" was far more important than derailleur rub.)
Now, one thing I do routinely with the SunTours using triples is replace the bushing sleeve over the cage bolt with a stack of #4 washers so if the chain drags over it, it isn't wearing anything. I also make the stack a little shorter than the bushing to narrow the bottom of the cage and speed up shifting. I have to do more corrections to trim. but I've never spent so much time in the small cog that I've killed a FD with cage wear there. (I' killed a few with wear in my racing days where "the gear" was far more important than derailleur rub.)
At the bottom of the cage of all SunTour FDs is a bolt that goes through both plates of the cage, head on the outside and threading in to the inner cage. Between the two cage plates, the bolt is hidden by a black plastic sleeve. I've used gearing combinations extreme enough that the chain dragged on that sleeve in the inner chainring and small cogs. This can wear out that bushing quickly. So:
I unscrew the bolt, then screw it back in without the sleeve but instead running it through somewhere around 10 washers (I don't count; just make up a stack a little shorter than the bushing but buying plenty more - they like to run away). For washers, I buy regular steel numbered washers just big enough to slide over the bolt (ie #4 or so). I go to Ace Hardware with the bolt. Get the washers and and another bolt of the same diameter and pitch (it is a standard metric thread). An all-thread bolt so if the nice SunTour one bottoms out with the shorter stack I can just swap bolts and try again.
This is nothing very earth shaking. But it does give the FD a surface the chain can rub for many miles doing no harm at all. Regular steel washers are never going to harm a hardened steel chain. If you use that rubbing combo a lot, you might have to replace 50 cents worth of washers in 5 years. Hope this makes it clear.
Ben