Socket Head Screw Assortment
03-29-22, 12:40 PM
#26
Senior Member
Join Date: Dec 2008
Location: Pioneer Valley
Posts: 967
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 310 Post(s)
Liked 713 Times
in
367 Posts
For cable crimps, there’s only one size. For ferrules (different from cable crimps), 4mm is common for derailer cable and 5mm is common for brake cable.
I wouldn’t by 100 of any bolt for bicycle use. I probably wouldn’t by 100 of any fastener for home use.
About the only “bicycle use” only fasteners that I can think of are ones on the derailer that need a stop. Most everything else are 5M and 6M. Older bikes might use something less standardized but modern bikes (post 1995), there’s very few bolts that you can’t find replacements at you local hardware store.
I wouldn’t by 100 of any bolt for bicycle use. I probably wouldn’t by 100 of any fastener for home use.
About the only “bicycle use” only fasteners that I can think of are ones on the derailer that need a stop. Most everything else are 5M and 6M. Older bikes might use something less standardized but modern bikes (post 1995), there’s very few bolts that you can’t find replacements at you local hardware store.
Likes For bboy314:
03-29-22, 12:42 PM
#27
Senior Member
Join Date: Oct 2020
Posts: 478
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 166 Post(s)
Liked 252 Times
in
147 Posts
For cable crimps, there’s only one size. For ferrules (different from cable crimps), 4mm is common for derailer cable and 5mm is common for brake cable.
I wouldn’t by 100 of any bolt for bicycle use. I probably wouldn’t by 100 of any fastener for home use.
About the only “bicycle use” only fasteners that I can think of are ones on the derailer that need a stop. Most everything else are 5M and 6M. Older bikes might use something less standardized but modern bikes (post 1995), there’s very few bolts that you can’t find replacements at you local hardware store.
I wouldn’t by 100 of any bolt for bicycle use. I probably wouldn’t by 100 of any fastener for home use.
About the only “bicycle use” only fasteners that I can think of are ones on the derailer that need a stop. Most everything else are 5M and 6M. Older bikes might use something less standardized but modern bikes (post 1995), there’s very few bolts that you can’t find replacements at you local hardware store.
https://www.homedepot.com/p/M5-0-8-x...4738/204283613 2 screws 1.31 plus travel and gas.
https://www.grainger.com/product/6HH...B&gclsrc=aw.ds 100 screws $11.28 not the cheapest source. just quick google examples.
03-29-22, 12:45 PM
#28
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,499
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2740 Post(s)
Liked 3,386 Times
in
2,049 Posts
Before you go too far and buy a huge assortment, keep in mind the great majority of the bolts used on bikes are M5x0.8mm in a rather limited range of lengths, certainly nothing longer than 25mm, and an occasional M6x1.0mm for seatpost clamps and similar. The only other threading I'm familiar with is M8x1.0 (not the more common M8x1.25) used for square taper crank bolts and M10x1.0 for rear derailleur mounting bolts but neither of these are routinely replaced.
03-29-22, 03:21 PM
#29
Full Member
Belmetric: https://belmetric.com/socket-products/
I wouldn't trust the quality from an eBay seller. Especially for a critical component that has safety consequences, don't take a chance.
Belmetric is the go-to place for us car guys.
Mark
I wouldn't trust the quality from an eBay seller. Especially for a critical component that has safety consequences, don't take a chance.
Belmetric is the go-to place for us car guys.
Mark
03-29-22, 03:23 PM
#30
Full Member
Belmetric: https://belmetric.com/socket-products/
I wouldn't trust the quality from an eBay seller. Especially for a critical component that has safety consequences, don't take a chance.
Belmetric is the go-to place for us car guys.
Mark
I wouldn't trust the quality from an eBay seller. Especially for a critical component that has safety consequences, don't take a chance.
Belmetric is the go-to place for us car guys.
Mark
03-30-22, 06:19 AM
#32
Senior Member
Join Date: Feb 2022
Location: GMT-5
Posts: 887
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 495 Post(s)
Liked 396 Times
in
264 Posts
That doesn't mean others do not. Wrong to assume that no one should ever be breaking bolks, which may be more typical for a DIY that only works on just a handful of bikes their lifetime.
03-30-22, 08:23 AM
#35
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,341
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6200 Post(s)
Liked 4,201 Times
in
2,357 Posts
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
