Tool talk
#1
Junior Member
Thread Starter
Tool talk
Not sure if this exists anywhere but I'm looking for a quick change ratchet allen key set? I know park tool have recently released the QTH-1 and I am looking for something similar but with a ratchet and maybe a slightly longer handle to save my wrists. Any suggestions would be great as I have searched everywhere and not really found much out there.
#2
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,784
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3587 Post(s)
Liked 3,400 Times
in
1,934 Posts
Metric allen key socket sets should be readily available from a hardware store or e.g. Harbor Freight:
https://www.harborfreight.com/38-in-...SABEgJ5tPD_BwE
https://www.harborfreight.com/38-in-...SABEgJ5tPD_BwE
#4
Senior Member
Join Date: Jan 2013
Posts: 2,678
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 581 Times
in
409 Posts
As John posted I use 1/4" drive up to 6mm and 1/2" drive above on my stand, a buddy has a Snap On 1/4" drive I want with an articulated handle to fit tight spots. That Park Tools looks pretty nice.
#5
Junior Member
Thread Starter
Metric allen key socket sets should be readily available from a hardware store or e.g. Harbor Freight:
https://www.harborfreight.com/38-in-...SABEgJ5tPD_BwE
https://www.harborfreight.com/38-in-...SABEgJ5tPD_BwE
I think maybe I will have to make some kind of bit holder with the hex shapes cut out. Possibly with a magnet on the back to keep the bits in place.
#6
Senior Member
Something like this, maybe? This is a representative sample only, not a specific recommendation. Many others seem available.
https://www.amazon.com/01148A-11-Pie...38495860&psc=1
This example doesn't specify the hex driver size used. Seems to be made to fit screwdrivers using interchangeable bits, so I'd guess maybe 1/4" - but I don't really know..
With the appropriate size socket, you could just change the bit vice having to change the socket. At least some sets I've seen are specified as being magnetic.
https://www.amazon.com/01148A-11-Pie...38495860&psc=1
This example doesn't specify the hex driver size used. Seems to be made to fit screwdrivers using interchangeable bits, so I'd guess maybe 1/4" - but I don't really know..
With the appropriate size socket, you could just change the bit vice having to change the socket. At least some sets I've seen are specified as being magnetic.
Last edited by Hondo6; 09-26-21 at 07:36 AM. Reason: Add additional info.
#7
Senior Member
Join Date: Jan 2009
Location: San Diego, CA
Posts: 3,670
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 836 Post(s)
Liked 1,061 Times
in
745 Posts
Here are some options mini ratchet wrench set - Bing You'll have to narrow the choices down to wrenches that have metric hex bits and not T-Handles like OP mentioned from Park Tool but these will give you more leverage and would be less bulky to carry in a seatpack if you wanted to and less $$$. Check reviews on any of these as quality can be questionable on some of them. The Park tool really does look like a nice, quality tool though but not cheap.
Last edited by Crankycrank; 09-26-21 at 07:59 AM.
#8
Junior Member
Thread Starter
I may have found a solution to my problems. Using an old dewalt bit set holder I can fit a 6mm,5mm, 4mm hex and the release button on the ratchet that I have works really well for single hand operation. I have just ordered a rectangular magnet so I can attach the holder and the bits to my work stand. I will post photos of the finished project if all goes well. And thanks for all of the suggestions so far.
#9
Full Member
Another approach might be to get some additional 1/4" ratchets, so that you can leave a few very-frequently-used bits more or less permanently installed on their own ratchets.
Likes For John Valuk:
#10
Senior Member
Join Date: Oct 2013
Location: Mich
Posts: 7,386
Bikes: RSO E-tire dropper fixie brifter
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 6 Post(s)
Liked 2,968 Times
in
1,917 Posts
If you ride in wet conditions, you might consider slathering the rust prone tools in a rust inhibiting lubricant stored in a drip-free parcel.
__________________
-Oh Hey!
-Oh Hey!